MailScanner lint errors?

[Julian Field]

-----BEGIN PGP SIGNED MESSAGE-----


On 6 Feb 2006, at 14:05, Steve Campbell wrote:

> Julian,
>
> I'm seeing the same with respect to the PID file. My conf file  
> points to /var/run/ and the file does exist.

I'll take a look at this problem. What are your "Run As User" and  
"Run As Group" set to?

> I'm also seeing the dual restart problem, where I am required to  
> start MS twice if I stop it. I alway need to 'killall sendmail',  
> but this doesn't cause the need to start MS twice. There are no  
> sendmail processes running before I start MS. There are no log  
> errors, it just doesn't start. I just thought I would mention this  
> off-thread part in case it might have something to do with the PID  
> problem.

Most likely cause is not waiting long enough between stopping and  
starting. If there are any MailScanner processes still clearing up,  
then it won't start.
Just restarting it again will extend the delay.

>
> MS 4.50-15
> MailWatch 1.0.3
> SA 3.10 (or whatever was the latest as of last week)
> Tao Linux 1.0 Update 6
>
> Thanks.
>
> Steve Campbell
> campbell at cnpapers.com
> Charleston Newspapers
>
>
>
> ----- Original Message ----- From: "Gerry Doris" <gdoris at rogers.com>
> To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
> Sent: Sunday, February 05, 2006 3:12 PM
> Subject: Re: MailScanner lint errors?
>
>
>> Julian Field wrote:
>>> I strongly suspect that none are relevant, apart from the Cannot  
>>> write pid file error. Check this is set to something in your  
>>> MailScanner.conf file.
>>
>> I checked MailScanner.conf and the MailScanner PID is set to /var/ 
>> run/MailScanner.pid  The file is really there and is being used.
>>
>> Like I said, there are no errors in any logs and mail is being  
>> sent and received.  It was working but I can't remember the last  
>> time I tried it.
>>
>> I'm using the latest MailWatch.  Would that be confusing the  
>> MailScanner lint operation?
>>
>>
>>>
>>> Gerry Doris wrote:
>>>
>>>> I've started seeing errors after running MailScanner --lint  
>>>> which I haven't seen before.
>>>>
>>>> I was running 4.50.10 and decided to upgrade to 4.50.15 today.  
>>>> Everything went well and MailScanner is working properly.  I see  
>>>> no errors in any of the logs.  Mail is being accepted and  
>>>> delivered.
>>>>
>>>> MailScanner -v runs without errors but when I run MailScanner -- 
>>>> lint I get the following:
>>>>
>>>> [root at tiger MailScanner]# MailScanner --lint
>>>> Read 701 hostnames from the phishing whitelist
>>>> Config: calling custom init function SQLBlacklist
>>>> Config: calling custom init function MailWatchLogging
>>>> Config: calling custom init function SQLWhitelist
>>>> Cannot write pid file , No such file or directory at /usr/sbin/ 
>>>> MailScanner line 1238
>>>> Checking for SpamAssassin errors (if you use it)...
>>>> Using SpamAssassin results cache
>>>> Connected to SpamAssassin cache database
>>>> SpamAssassin reported no errors.
>>>>
>>>> MailScanner.conf says "Virus Scanners = clamavmodule f-prot  
>>>> trend bitdefender"
>>>>
>>>> Use of uninitialized value in split at /usr/lib/MailScanner/ 
>>>> MailScanner/SweepViruses.pm line 2879.
>>>> Use of uninitialized value in concatenation (.) or string at / 
>>>> usr/lib/MailScanner/MailScanner/SweepViruses.pm line 2880.
>>>> Use of uninitialized value in concatenation (.) or string at / 
>>>> usr/lib/MailScanner/MailScanner/SweepViruses.pm line 2880.
>>>> Can't exec "-IsItInstalled": No such file or directory at /usr/ 
>>>> lib/MailScanner/MailScanner/SweepViruses.pm line 2882.
>>>> ...snip
>>>> the above is repeated 5 more times
>>>> ...snip
>>>>
>>>> Found these virus scanners installed: bitdefender, f-prot,  
>>>> clamavmodule, trend
>>>
>>>
>>
>> -- 
>> MailScanner mailing list
>> mailscanner at lists.mailscanner.info
>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>
>> Before posting, read http://wiki.mailscanner.info/posting
>>
>> Support MailScanner development - buy the book off the website!
>
>
> -- 
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
> Before posting, read http://wiki.mailscanner.info/posting
>
> Support MailScanner development - buy the book off the website!

- -- 
Julian Field
www.MailScanner.info
Buy the MailScanner book at www.MailScanner.info/store
PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654


-----BEGIN PGP SIGNATURE-----
Version: PGP Desktop 9.0.4 (Build 4042)

iQEVAwUBQ+dZgvw32o+k+q+hAQG61AgAmQhhlnMY2x1Ze2Sxm4bXrwuLancKv54G
leY3Aj+Ac/AJVdkqGGHUGSRb6f0xn0YD/XTvJY6lcISunvKF7ofukk4KgKoHyEgJ
R0HSwASUqal52vcYBsJwfRf5ppx9ytaX5vfqyfJieqg+CpD2X8TAcEa+Rqu7V7ZP
7oOBU+RMsdzMJeh8qlxX8ivpEQnd5EEeQOAaMEKmUYqm/tePystfvRQCo9sQjthU
wEcpp9+mpRGKTR8lzvXEQ1SZApThNhZ+PQxPGBLUQee3GhqFd4dzAEFpcJ6xINYc
6QcfT2Zg5fZsmI9Gs+jD7RXCShLgI/8+YbE9L/Ogfg+6crMQbK15Kg==
=0kyC
-----END PGP SIGNATURE-----

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.