Mailscanner MRTG

[Roger Jochem]

    [ The following text is in the "iso-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

For some reason I'm not being able to set this up...

There is always a time out while connecting with the snmp (port 116).

----- Original Message -----
From: "Mike" <michael at NOMENNESCIO.NET>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Wednesday, February 16, 2005 8:31 AM
Subject: Re: Mailscanner MRTG


> >-----Original Message-----
> >From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> >Behalf Of Roger Jochem
> >
> >The service wasn't running...
>
> ;-)
>
> >I started it now. Is there anything else I should do after start it?
>
> Configure /etc/mailscanner-mrtg.conf, (change <string> with your public
SNMP string and <interfaces> with the comma separated list of interfaces you
want to monitor. Also make sure the path of snmpwalk is correct):
>
> # -------------
> # SNMP SETTINGS
> # -------------
>
> # Set this to no if you do not want to use snmp - note that this will
result
> # in several graphs being blank.
> # You must use either net-snmp or ucd-snmp, this is auto-detected
> Use SNMP = yes
>
> # The UDP port that snmp listens on.  This is usually port 161.
> SNMP port = 161
>
> # The Community string to use (this should be a read-only community)
> SNMP Community = <string>
>
> # where is your snmpwalk command?
> Snmpwalk Binary = /usr/bin/snmpwalk
>
> # Which interfaces to monitor (comma separated list)
> Interfaces to Monitor = <interfaces>
>
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
> Support MailScanner development - buy the book off the website!

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!