New Fresh Install Problems SuSE 9.1
Mike Kercher
mike at CAMAROSS.NET
Fri Nov 5 02:21:21 GMT 2004
Nathan P. wrote:
> ----- Original Message -----
> From: "Mike Kercher" <mike at CAMAROSS.NET>
> To: <MAILSCANNER at JISCMAIL.AC.UK>
> Sent: Thursday, November 04, 2004 6:33 PM
> Subject: Re: New Fresh Install Problems SuSE 9.1
>
>
>> Nathan P. wrote:
>>> Ok here's the quick and dirty of what has happened.
>>>
>>> We had power surge. I'm a retard and forgot I didn't have it
>>> plugged into the UPS.
>>>
>>> Well, killed my friggin' hard drive!
>>>
>>> Nehoot.
>>>
>>> Before all this I was running SuSE 9.0 x86_64 and running mail
>>> scanner perfectly with no probs.
>>>
>>> I put in 2 new SATA drives using RAID mirroring and installed SuSE
>>> 9.1
>>> x86_64 with 2.6 kernel.
>>>
>>> Installing this version: MailScanner-4.35.9-1
>>>
>>> Install goes fine until the very very end. Read further and you'll
>>> see the logged install error.
>>>
>>>
>>> I'm getting notice emails that have this:
>>> Report: MailScanner: Could not analyze message
>>>
>>> But it always seems to be coming from Outlook Express or Outlook
>>> email programs that get the error. It doesn't do this on every
>>> email. I could be wrong on the Outlook thing. But I've even tried
>>> messing with tnef. Turning it off or using /usr/bin/tnef and
>>> /usr/bin/file instead of internal. But still same thing.
>>>
>>> Looking through the logs it's giving this error:
>>> MailScanner[16056]: Cannot parse
>>> /var/spool/MailScanner/incoming/16056/iA4MbdOj016065.header and ,
>>> Can't locate object method "init" via package
>>> "MIME::Decoder::QuotedPrint" at
>>> /usr/lib/perl5/site_perl/5.8.3/MIME/Decoder.pm line 179.
>>>
>>>
>>> I've tried all sorts of things - anything and everything I could
>>> think of related to MIME tools and decoder and tnef and all sorts of
>>> junk. I would uninstall all rpms then I tried installing the perl
>>> mods by hand through: perl -MCPAN -e shell
>>>
>>> But still when I run install.sh I get this error:
>>>
>>> Attempting to build and install perl-MIME-tools-5.415-1 Installing
>>> perl-MIME-tools-5.415-1.src.rpm
>>> Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9467
>>> + umask 022
>>> + cd /usr/src/packages/BUILD
>>> + cd /usr/src/packages/BUILD
>>> + rm -rf MIME-tools-5.415
>>> + /usr/bin/gzip -dc
>>> + /usr/src/packages/SOURCES/MIME-tools-5.415.tar.gz + tar -xf -
>>> + STATUS=0
>>> + '[' 0 -ne 0 ']'
>>> + cd MIME-tools-5.415
>>> ++ /usr/bin/id -u
>>> + '[' 0 = 0 ']'
>>> + /bin/chown -Rhf root .
>>> ++ /usr/bin/id -u
>>> + '[' 0 = 0 ']'
>>> + /bin/chgrp -Rhf root .
>>> + /bin/chmod -Rf a+rX,g-w,o-w .
>>> + echo 'Patch #0 (mime-tools-5.415-patch1.txt):'
>>> Patch #0 (mime-tools-5.415-patch1.txt):
>>> + patch -p1 -s
>>> + exit 0
>>> Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9467 + umask 022
>>> + cd /usr/src/packages/BUILD
>>> + /bin/rm -rf /var/tmp/perl-MIME-tools-root
>>> ++ dirname /var/tmp/perl-MIME-tools-root
>>> + /bin/mkdir -p /var/tmp
>>> + /bin/mkdir /var/tmp/perl-MIME-tools-root cd MIME-tools-5.415 +
>>> CFLAGS=-O2 -g + perl Makefile.PL
>>> PREFIX=/var/tmp/perl-MIME-tools-root/usr Checking if your kit is
>>> complete...
>>> Looks good
>>> Warning: prerequisite MIME::Base64 3.03 not found. We have 2.12.
>>> Writing Makefile for MIME-tools
>>> + make
>>> cp lib/MIME/Body.pm blib/lib/MIME/Body.pm cp
>>> lib/MIME/Decoder/Gzip64.pm blib/lib/MIME/Decoder/Gzip64.pm cp
>>> lib/MIME/Field/ContDisp.pm blib/lib/MIME/Field/ContDisp.pm cp
>>> set-version.pl blib/lib/set-version.pl cp lib/MIME/Parser/Results.pm
>>> blib/lib/MIME/Parser/Results.pm cp lib/MIME/Field/ContType.pm
>>> blib/lib/MIME/Field/ContType.pm cp lib/MIME/Decoder/NBit.pm
>>> blib/lib/MIME/Decoder/NBit.pm cp lib/MIME/Entity.pm
>>> blib/lib/MIME/Entity.pm cp lib/MIME/Head.pm blib/lib/MIME/Head.pm cp
>>> lib/MIME/Parser/Filer.pm blib/lib/MIME/Parser/Filer.pm cp
>>> lib/MIME/Words.pm blib/lib/MIME/Words.pm cp
>>> lib/MIME/Field/ParamVal.pm blib/lib/MIME/Field/ParamVal.pm cp
>>> lib/MIME/Decoder/BinHex.pm blib/lib/MIME/Decoder/BinHex.pm cp
>>> lib/MIME/Tools.pm blib/lib/MIME/Tools.pm cp
>>> lib/MIME/Field/ConTraEnc.pm blib/lib/MIME/Field/ConTraEnc.pm cp
>>> lib/MIME/Decoder/Binary.pm blib/lib/MIME/Decoder/Binary.pm cp
>>> lib/MIME/Decoder.pm blib/lib/MIME/Decoder.pm cp
>>> lib/MIME/Decoder/UU.pm blib/lib/MIME/Decoder/UU.pm cp
>>> lib/MIME/Decoder/Base64.pm blib/lib/MIME/Decoder/Base64.pm cp
>>> lib/MIME/Decoder/QuotedPrint.pm blib/lib/MIME/Decoder/QuotedPrint.pm
>>> cp lib/MIME/WordDecoder.pm blib/lib/MIME/WordDecoder.pm cp
>>> lib/MIME/Parser/Reader.pm blib/lib/MIME/Parser/Reader.pm cp
>>> lib/MIME/Parser.pm blib/lib/MIME/Parser.pm Manifying
>>> blib/man3/MIME::Decoder::Gzip64.3pm
>>> Manifying blib/man3/MIME::Body.3pm
>>> Manifying blib/man3/MIME::Field::ContDisp.3pm
>>> Manifying blib/man3/MIME::Parser::Results.3pm
>>> Manifying blib/man3/MIME::Field::ContType.3pm
>>> Manifying blib/man3/MIME::Decoder::NBit.3pm Manifying
>>> blib/man3/MIME::Entity.3pm Manifying
>>> blib/man3/MIME::Parser::Filer.3pm Manifying blib/man3/MIME::Head.3pm
>>> Manifying blib/man3/MIME::Words.3pm Manifying
>>> blib/man3/MIME::Field::ParamVal.3pm
>>> Manifying blib/man3/MIME::Decoder::BinHex.3pm
>>> Manifying blib/man3/MIME::Tools.3pm
>>> Manifying blib/man3/MIME::Field::ConTraEnc.3pm
>>> Manifying blib/man3/MIME::Decoder::Binary.3pm
>>> Manifying blib/man3/MIME::Decoder.3pm Manifying
>>> blib/man3/MIME::Decoder::UU.3pm Manifying
>>> blib/man3/MIME::Decoder::QuotedPrint.3pm
>>> Manifying blib/man3/MIME::Decoder::Base64.3pm
>>> Manifying blib/man3/MIME::WordDecoder.3pm Manifying
>>> blib/man3/MIME::Parser.3pm Manifying
>>> blib/man3/MIME::Parser::Reader.3pm + make test
>>> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
>>> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Body...........ok
>>> t/Decoder........ok t/Entity.........Can't locate object method
>>> "init" via package "MIME::Decoder::QuotedPrint" at
>>> /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
>>> line 179. t/Entity.........dubious
>>> Test returned status 9 (wstat 2304, 0x900) Scalar found
>>> where operator expected at (eval 155) line 1, near "'int' $__val"
>>> (Missing operator before $__val?)
>>> DIED. FAILED tests 16-29
>>> Failed 14/29 tests, 51.72% okay t/Gauntlet.......ok
>>> t/Head...........ok t/Misc...........Too many arguments for
>>> MIME::QuotedPrint::encode_qp at
>>>
>>
>
/usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder/QuotedPrint.p
>>> m line 74, near "shift)"
>>> Compilation failed in require at t/Misc.t line 73.
>>> BEGIN failed--compilation aborted at t/Misc.t line 73.
>>> t/Misc...........dubious Test returned status 255 (wstat
>>> 65280, 0xff00) t/Parser.........Can't locate object method "init"
>>> via package "MIME::Decoder::QuotedPrint" at
>>> /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
>>> line 179. t/Parser.........dubious
>>> Test returned status 25 (wstat 6400, 0x1900) DIED. FAILED
>>> tests 8-12 Failed 5/12 tests, 58.33% okay
>>> t/Ref............FAILED tests 5, 9, 13, 15, 21, 37
>>> Failed 6/50 tests, 88.00% okay t/WordDecoder....ok
>>> t/Words..........ok Failed Test Stat Wstat Total Fail Failed List
>>> of Failed
>>>
>> ----------------------------------------------------------------------
>> ----
> --
>>> ---
>>> t/Entity.t 9 2304 29 28 96.55% 16-29
>>> t/Misc.t 255 65280 ?? ?? % ??
>>> t/Parser.t 25 6400 12 10 83.33% 8-12
>>> t/Ref.t 50 6 12.00% 5 9 13 15 21 37
>>> Failed 4/10 test scripts, 60.00% okay. 25/217 subtests failed,
>>> 88.48% okay.
>>> make: *** [test_dynamic] Error 255
>>> error: Bad exit status from /var/tmp/rpm-tmp.9467 (%build)
>>>
>>>
>>>
>>> If you notice in that error you see:
>>>
>>> t/Entity.........Can't locate object method "init" via package
>>> "MIME::Decoder::QuotedPrint" at
>>> /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
>>> line 179.
>>>
>>> That's the same error in the mail log.
>>>
>>>
>>> And also I'm sure this has something to do with it too haha:
>>>
>>> Warning: prerequisite MIME::Base64 3.03 not found. We have 2.12.
>>>
>>>
>>> So I know I'm close. I may have screwed this up installing all the
>>> perl mods by hand but I did that because I was already getting this
>>> error so I thought that would help. I tried clean "name of mod" but
>>> I don't think that deletes them.
>>>
>>>
>>> If anyone can just help me figure this out I'd appreciate it
>>> greatly!!!
>>>
>>>
>>> PS: Haven't tried installing all perl mods by hand then doing
>>> ./install.sh nodeps or whatever. That may not work neways.
>>>
>>> Thanks.
>>
>> Can you rebuild the MIME::Base64 src.rpm and install it manually?
>>
>> Mike
>
>
> You wouldn't happen to know the "correct" way to do it on SuSE would
> you? I've rebuilt src rpms once before a long time ago but I foget
> how to do it.
>
> Before I do some googling does anyone know the way to do it in SuSE?
>
> Thanks a lot for your reply.
I run Redhat EL and variants thereof. On these boxen, you'd run something
like:
rpmbuild --rebuild filename.src.rpm
Older versions of Redhat were:
rpm --rebuild xxx.src.rpm
The only SuSE box I have is OpenExchange and I don't tinker with it too
much...rather fragile :)
Mike
------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
More information about the MailScanner
mailing list