New Fresh Install Problems SuSE 9.1
Nathan P.
natedog550 at HOTMAIL.COM
Fri Nov 5 01:50:33 GMT 2004
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
----- Original Message -----
From: "Mike Kercher" <mike at CAMAROSS.NET>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Thursday, November 04, 2004 6:33 PM
Subject: Re: New Fresh Install Problems SuSE 9.1
> Nathan P. wrote:
> > Ok here's the quick and dirty of what has happened.
> >
> > We had power surge. I'm a retard and forgot I didn't have it plugged
> > into the UPS.
> >
> > Well, killed my friggin' hard drive!
> >
> > Nehoot.
> >
> > Before all this I was running SuSE 9.0 x86_64 and running mail
> > scanner perfectly with no probs.
> >
> > I put in 2 new SATA drives using RAID mirroring and installed SuSE 9.1
> > x86_64 with 2.6 kernel.
> >
> > Installing this version: MailScanner-4.35.9-1
> >
> > Install goes fine until the very very end. Read further and you'll
> > see the logged install error.
> >
> >
> > I'm getting notice emails that have this:
> > Report: MailScanner: Could not analyze message
> >
> > But it always seems to be coming from Outlook Express or Outlook
> > email programs that get the error. It doesn't do this on every
> > email. I could be wrong on the Outlook thing. But I've even tried
> > messing with tnef. Turning it off or using /usr/bin/tnef and
> > /usr/bin/file instead of internal. But still same thing.
> >
> > Looking through the logs it's giving this error:
> > MailScanner[16056]: Cannot parse
> > /var/spool/MailScanner/incoming/16056/iA4MbdOj016065.header and ,
> > Can't locate object method "init" via package
> > "MIME::Decoder::QuotedPrint" at
> > /usr/lib/perl5/site_perl/5.8.3/MIME/Decoder.pm line 179.
> >
> >
> > I've tried all sorts of things - anything and everything I could
> > think of related to MIME tools and decoder and tnef and all sorts of
> > junk. I would uninstall all rpms then I tried installing the perl
> > mods by hand through:
> > perl -MCPAN -e shell
> >
> > But still when I run install.sh I get this error:
> >
> > Attempting to build and install perl-MIME-tools-5.415-1 Installing
> > perl-MIME-tools-5.415-1.src.rpm
> > Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9467
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + cd /usr/src/packages/BUILD
> > + rm -rf MIME-tools-5.415
> > + /usr/bin/gzip -dc /usr/src/packages/SOURCES/MIME-tools-5.415.tar.gz
> > + tar -xf -
> > + STATUS=0
> > + '[' 0 -ne 0 ']'
> > + cd MIME-tools-5.415
> > ++ /usr/bin/id -u
> > + '[' 0 = 0 ']'
> > + /bin/chown -Rhf root .
> > ++ /usr/bin/id -u
> > + '[' 0 = 0 ']'
> > + /bin/chgrp -Rhf root .
> > + /bin/chmod -Rf a+rX,g-w,o-w .
> > + echo 'Patch #0 (mime-tools-5.415-patch1.txt):'
> > Patch #0 (mime-tools-5.415-patch1.txt):
> > + patch -p1 -s
> > + exit 0
> > Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9467
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + /bin/rm -rf /var/tmp/perl-MIME-tools-root
> > ++ dirname /var/tmp/perl-MIME-tools-root
> > + /bin/mkdir -p /var/tmp
> > + /bin/mkdir /var/tmp/perl-MIME-tools-root cd MIME-tools-5.415
> > + CFLAGS=-O2 -g
> > + perl Makefile.PL PREFIX=/var/tmp/perl-MIME-tools-root/usr
> > Checking if your kit is complete...
> > Looks good
> > Warning: prerequisite MIME::Base64 3.03 not found. We have 2.12.
> > Writing Makefile for MIME-tools
> > + make
> > cp lib/MIME/Body.pm blib/lib/MIME/Body.pm cp
> > lib/MIME/Decoder/Gzip64.pm blib/lib/MIME/Decoder/Gzip64.pm cp
> > lib/MIME/Field/ContDisp.pm blib/lib/MIME/Field/ContDisp.pm cp
> > set-version.pl blib/lib/set-version.pl cp lib/MIME/Parser/Results.pm
> > blib/lib/MIME/Parser/Results.pm cp lib/MIME/Field/ContType.pm
> > blib/lib/MIME/Field/ContType.pm cp lib/MIME/Decoder/NBit.pm
> > blib/lib/MIME/Decoder/NBit.pm cp lib/MIME/Entity.pm
> > blib/lib/MIME/Entity.pm cp lib/MIME/Head.pm blib/lib/MIME/Head.pm cp
> > lib/MIME/Parser/Filer.pm blib/lib/MIME/Parser/Filer.pm cp
> > lib/MIME/Words.pm blib/lib/MIME/Words.pm cp
> > lib/MIME/Field/ParamVal.pm blib/lib/MIME/Field/ParamVal.pm cp
> > lib/MIME/Decoder/BinHex.pm blib/lib/MIME/Decoder/BinHex.pm cp
> > lib/MIME/Tools.pm blib/lib/MIME/Tools.pm cp
> > lib/MIME/Field/ConTraEnc.pm blib/lib/MIME/Field/ConTraEnc.pm cp
> > lib/MIME/Decoder/Binary.pm blib/lib/MIME/Decoder/Binary.pm cp
> > lib/MIME/Decoder.pm blib/lib/MIME/Decoder.pm cp
> > lib/MIME/Decoder/UU.pm blib/lib/MIME/Decoder/UU.pm cp
> > lib/MIME/Decoder/Base64.pm blib/lib/MIME/Decoder/Base64.pm cp
> > lib/MIME/Decoder/QuotedPrint.pm blib/lib/MIME/Decoder/QuotedPrint.pm
> > cp lib/MIME/WordDecoder.pm blib/lib/MIME/WordDecoder.pm cp
> > lib/MIME/Parser/Reader.pm blib/lib/MIME/Parser/Reader.pm cp
> > lib/MIME/Parser.pm blib/lib/MIME/Parser.pm Manifying
> > blib/man3/MIME::Decoder::Gzip64.3pm
> > Manifying blib/man3/MIME::Body.3pm
> > Manifying blib/man3/MIME::Field::ContDisp.3pm
> > Manifying blib/man3/MIME::Parser::Results.3pm
> > Manifying blib/man3/MIME::Field::ContType.3pm
> > Manifying blib/man3/MIME::Decoder::NBit.3pm Manifying
> > blib/man3/MIME::Entity.3pm Manifying
> > blib/man3/MIME::Parser::Filer.3pm Manifying blib/man3/MIME::Head.3pm
> > Manifying blib/man3/MIME::Words.3pm Manifying
> > blib/man3/MIME::Field::ParamVal.3pm
> > Manifying blib/man3/MIME::Decoder::BinHex.3pm
> > Manifying blib/man3/MIME::Tools.3pm
> > Manifying blib/man3/MIME::Field::ConTraEnc.3pm
> > Manifying blib/man3/MIME::Decoder::Binary.3pm
> > Manifying blib/man3/MIME::Decoder.3pm
> > Manifying blib/man3/MIME::Decoder::UU.3pm Manifying
> > blib/man3/MIME::Decoder::QuotedPrint.3pm
> > Manifying blib/man3/MIME::Decoder::Base64.3pm
> > Manifying blib/man3/MIME::WordDecoder.3pm Manifying
> > blib/man3/MIME::Parser.3pm Manifying
> > blib/man3/MIME::Parser::Reader.3pm + make test
> > PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
> > "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Body...........ok
> > t/Decoder........ok t/Entity.........Can't locate object method
> > "init" via package "MIME::Decoder::QuotedPrint" at
> > /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
> > line 179.
> > t/Entity.........dubious
> > Test returned status 9 (wstat 2304, 0x900) Scalar found where
> > operator expected at (eval 155) line 1, near "'int' $__val"
> > (Missing operator before $__val?)
> > DIED. FAILED tests 16-29
> > Failed 14/29 tests, 51.72% okay
> > t/Gauntlet.......ok
> > t/Head...........ok
> > t/Misc...........Too many arguments for MIME::QuotedPrint::encode_qp
> > at
> >
>
/usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder/QuotedPrint.p
> > m line 74, near "shift)"
> > Compilation failed in require at t/Misc.t line 73.
> > BEGIN failed--compilation aborted at t/Misc.t line 73.
> > t/Misc...........dubious
> > Test returned status 255 (wstat 65280, 0xff00)
> > t/Parser.........Can't locate object method "init" via package
> > "MIME::Decoder::QuotedPrint" at
> > /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
> > line 179.
> > t/Parser.........dubious
> > Test returned status 25 (wstat 6400, 0x1900) DIED. FAILED
> > tests 8-12 Failed 5/12 tests, 58.33% okay
> > t/Ref............FAILED tests 5, 9, 13, 15, 21, 37
> > Failed 6/50 tests, 88.00% okay
> > t/WordDecoder....ok
> > t/Words..........ok
> > Failed Test Stat Wstat Total Fail Failed List of Failed
> >
> --------------------------------------------------------------------------
--
> > ---
> > t/Entity.t 9 2304 29 28 96.55% 16-29
> > t/Misc.t 255 65280 ?? ?? % ??
> > t/Parser.t 25 6400 12 10 83.33% 8-12
> > t/Ref.t 50 6 12.00% 5 9 13 15 21 37
> > Failed 4/10 test scripts, 60.00% okay. 25/217 subtests failed, 88.48%
> > okay.
> > make: *** [test_dynamic] Error 255
> > error: Bad exit status from /var/tmp/rpm-tmp.9467 (%build)
> >
> >
> >
> > If you notice in that error you see:
> >
> > t/Entity.........Can't locate object method "init" via package
> > "MIME::Decoder::QuotedPrint" at
> > /usr/src/packages/BUILD/MIME-tools-5.415/blib/lib/MIME/Decoder.pm
> > line 179.
> >
> > That's the same error in the mail log.
> >
> >
> > And also I'm sure this has something to do with it too haha:
> >
> > Warning: prerequisite MIME::Base64 3.03 not found. We have 2.12.
> >
> >
> > So I know I'm close. I may have screwed this up installing all the
> > perl mods by hand but I did that because I was already getting this
> > error so I thought that would help. I tried clean "name of mod" but
> > I don't think that deletes them.
> >
> >
> > If anyone can just help me figure this out I'd appreciate it
> > greatly!!!
> >
> >
> > PS: Haven't tried installing all perl mods by hand then doing
> > ./install.sh nodeps or whatever. That may not work neways.
> >
> > Thanks.
>
> Can you rebuild the MIME::Base64 src.rpm and install it manually?
>
> Mike
You wouldn't happen to know the "correct" way to do it on SuSE would you?
I've rebuilt src rpms once before a long time ago but I foget how to do it.
Before I do some googling does anyone know the way to do it in SuSE?
Thanks a lot for your reply.
--
NateDog
------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
More information about the MailScanner
mailing list