High Load
Martin Hepworth
martinh at SOLID-STATE-LOGIC.COM
Wed Apr 28 08:55:05 IST 2004
Mike
I have a rule set so outgoing email only gets virus scanned, not spam
scanned.
--
Martin Hepworth
Snr Systems Administrator
Solid State Logic
Tel: +44 (0)1865 842300
Mike Kercher wrote:
> I solved my problem in a roundabout way. I took out the RulesDeJour for one
> thing. I'll try adding them back later. I think the biggest kicker was to
> stop scanning (virus and content) for OUTGOING email. This brought my load
> down from 190 to 2.1 Not sure why the sudden increase in load, but at least
> the mail is flowing again!
>
> Thanks for the help folks!
>
> Mike
>
>
>
>>-----Original Message-----
>>From: MailScanner mailing list
>>[mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Martin Hepworth
>>Sent: Tuesday, April 27, 2004 8:31 AM
>>To: MAILSCANNER at JISCMAIL.AC.UK
>>Subject: Re: High Load
>>
>>Jeff
>>
>>seems to affect the smaller machines (like mine) quite badly..
>>
>>
>>--
>>Martin Hepworth
>>Snr Systems Administrator
>>Solid State Logic
>>Tel: +44 (0)1865 842300
>>
>>
>>Jeff A. Earickson wrote:
>>
>>>Hi,
>>> I've been using bigevil.cf for a while (2.12M until this
>>
>>morning,
>>
>>>2.12P now), with no load problems. My setup: Sun V1280 (4 cpus),
>>>Solaris 9, MS 4.29.7, razor, SA 2.63, perl 5.8.3 built as
>>
>>sun4-solaris-thread-multi.
>>
>>>My typical load is in the range of 2-3.
>>>
>>>Jeff Earickson
>>>Colby College
>>>
>>>On Tue, 27 Apr 2004, Mike Kercher wrote:
>>>
>>>
>>>
>>>>Date: Tue, 27 Apr 2004 07:55:59 -0500
>>>>From: Mike Kercher <mike at CAMAROSS.NET>
>>>>Reply-To: MailScanner mailing list <MAILSCANNER at JISCMAIL.AC.UK>
>>>>To: MAILSCANNER at JISCMAIL.AC.UK
>>>>Subject: Re: High Load
>>>>
>>>>excellent pointer! I *did* have bigevil.cf loaded. After
>>
>>rm'ing it
>>
>>>>and reloading MS, my load is down below 1.00 again. I'll
>>
>>be keeping
>>
>>>>an eye on it today. Thanks a LOT! I woke up to an unresponsive
>>>>server this morning :/
>>>>
>>>>Mike
>>>>
>>>>
>>>>
>>>>
>>>>>-----Original Message-----
>>>>>From: MailScanner mailing list
>>>>>[mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Martin Hepworth
>>>>>Sent: Tuesday, April 27, 2004 3:09 AM
>>>>>To: MAILSCANNER at JISCMAIL.AC.UK
>>>>>Subject: Re: High Load
>>>>>
>>>>>Have you got the bigevil.cf loaded in SA? I found this a
>>
>>major hog..
>>
>>>>>Also do the debug stuff mentioned previously.
>>>>>
>>>>>--
>>>>>Martin Hepworth
>>>>>Snr Systems Administrator
>>>>>Solid State Logic
>>>>>Tel: +44 (0)1865 842300
>>>>>
>>>>>
>>>>>James Gray wrote:
>>>>>
>>>>>
>>>>>>Pete wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Mike Kercher wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>I'm seeing a HUGE load on my system and I can't figure out why.
>>>>>>>>
>>>>>>>>14:47:00 up 46 min, 3 users, load average: 13.43,
>>
>>14.25, 10.73
>>
>>>>>>>>102 processes: 87 sleeping, 12 running, 3 zombie, 0 stopped
>>>>>>>>CPU states: 75.6% user 24.3% system 0.0% nice 0.0% iowait
>>>>>>>>0.0% idle
>>>>>>>>Mem: 1022796k av, 915824k used, 106972k free, 0k
>>>>>
>>>>>shrd, 43448k
>>>>>
>>>>>
>>>>>>>>buff
>>>>>>>> 522344k actv, 197376k in_d, 127288k in_c
>>>>>>>>Swap: 2048276k av, 31672k used, 2016604k free
>>>>>
>>>>> 441600k
>>>>>
>>>>>
>>>>>>>>cached
>>>>>>>>
>>>>>>>>PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM
>>>>>
>>>>>TIME CPU COMMAND
>>>>>
>>>>>
>>>>>>>>9837 root 15 0 14808 952 820 S 68.5 0.0 3:25 0
>>>>>>>>MailScanner
>>>>>>>>15534 hbaldera 23 0 0 0 0 Z 0.7 0.0
>>
>> 0:00 0
>>
>>>>>>>>cucipop
>>>>>>>><defunct>
>>>>>>
>>>>>>
>>>>>>**SNIPPED**
>>>>>>
>>>>>>
>>>>>>
>>>>>>>Why does your machine use swap when you have plenty of ram free ?
>>>>>>
>>>>>>
>>>>>>I've often seen my *nix boxen swap stuff out to increase
>>>>>
>>>>>cache/buffer
>>>>>
>>>>>
>>>>>>for stuff that is loaded but very rarely used (like lpd).
>>>>>
>>>>>I remember
>>>>>
>>>>>
>>>>>>doing some exercises with this on Solaris when I did my Sun
>>>>>
>>>>>CSE course
>>>>>
>>>>>
>>>>>>(the idea was performance tuning a server with very high
>>>>>
>>>>>I/O and low
>>>>>
>>>>>
>>>>>>application memory requirements - think BIG ftp/mail
>>>>>
>>>>>server). Never
>>>>>
>>>>>
>>>>>>touched it since then but is is possible to skew the memory
>>>>>
>>>>>management
>>>>>
>>>>>
>>>>>>to "prefer" buffer/cache in certain circumstances.
>>>>>>
>>>>>>Cheers,
>>>>>>
>>>>>>James
>>>>>>
>>>>>>-------------------------- MailScanner list ----------------------
>>>>>>To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
>>>>>>For further info about MailScanner, please see the Most Asked
>>>>>>Questions at http://www.mailscanner.biz/maq/ and
>>
>>the archives
>>
>>>>>>at http://www.jiscmail.ac.uk/lists/mailscanner.html
>>>>>
>>>>>***********************************************************
>>
>>**********
>>
>>>>>*
>>>>>
>>>>>This email and any files transmitted with it are confidential and
>>>>>intended solely for the use of the individual or entity to
>>
>>whom they
>>
>>>>>are addressed. If you have received this email in error
>>
>>please notify
>>
>>>>>the system manager.
>>>>>
>>>>>This footnote confirms that this email message has been
>>
>>swept for the
>>
>>>>>presence of computer viruses and is believed to be clean.
>>>>>
>>>>>***********************************************************
>>
>>**********
>>
>>>>>*
>>>>>
>>>>>-------------------------- MailScanner list ----------------------
>>>>>To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
>>>>>For further info about MailScanner, please see the Most Asked
>>>>>Questions at http://www.mailscanner.biz/maq/ and
>>
>>the archives
>>
>>>>>at http://www.jiscmail.ac.uk/lists/mailscanner.html
>>>>>
>>>>
>>>>-------------------------- MailScanner list ----------------------
>>>>To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
>>>>For further info about MailScanner, please see the Most Asked
>>>>Questions at http://www.mailscanner.biz/maq/ and the archives
>>>>at http://www.jiscmail.ac.uk/lists/mailscanner.html
>>>>
>>>
>>>
>>>-------------------------- MailScanner list ----------------------
>>>To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
>>>For further info about MailScanner, please see the Most Asked
>>>Questions at http://www.mailscanner.biz/maq/ and the archives
>>>at http://www.jiscmail.ac.uk/lists/mailscanner.html
>>
>>**********************************************************************
>>
>>This email and any files transmitted with it are confidential
>>and intended solely for the use of the individual or entity
>>to whom they are addressed. If you have received this email
>>in error please notify the system manager.
>>
>>This footnote confirms that this email message has been swept
>>for the presence of computer viruses and is believed to be clean.
>>
>>**********************************************************************
>>
>>-------------------------- MailScanner list ----------------------
>>To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
>>For further info about MailScanner, please see the Most Asked
>>Questions at http://www.mailscanner.biz/maq/ and the archives
>>at http://www.jiscmail.ac.uk/lists/mailscanner.html
>>
>
>
> -------------------------- MailScanner list ----------------------
> To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
> For further info about MailScanner, please see the Most Asked
> Questions at http://www.mailscanner.biz/maq/ and the archives
> at http://www.jiscmail.ac.uk/lists/mailscanner.html
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote confirms that this email message has been swept
for the presence of computer viruses and is believed to be clean.
**********************************************************************
-------------------------- MailScanner list ----------------------
To leave, send leave mailscanner to jiscmail at jiscmail.ac.uk
For further info about MailScanner, please see the Most Asked
Questions at http://www.mailscanner.biz/maq/ and the archives
at http://www.jiscmail.ac.uk/lists/mailscanner.html
More information about the MailScanner
mailing list