Problems with 5.1.1 milter

[Shawn Iverson]

Thanks for the tests Mark.  This will definitely need fixed.

On Fri, Oct 12, 2018 at 9:47 PM Mark Sapiro <mark at msapiro.net> wrote:

> On Fri, 12 Oct 2018 07:40:40 -0400 Shawn Iverson via MailScanner
> <mailscanner at lists.mailscanner.info> wrote:
>
> > Ok.  I'll run some tests and see what happens.  Were both recipients in
> the
> > To: field?
>
> I have run a simple test with a message with one local and one remote
> recipient.
>
> I get this in the log:
>
> > Oct 12 18:16:23 msapiro postfix/smtpd[26916]: connect from
> msapiro-enet.attlocal.net[10.211.115.100]
> > Oct 12 18:16:23 msapiro postfix/smtpd[26916]: 7002C340121: client=
> msapiro-enet.attlocal.net[10.211.115.100]
> > Oct 12 18:16:23 msapiro postfix/cleanup[26921]: 7002C340121: message-id=<
> 20181013011623.7002C340121 at msapiro.net>
> > Oct 12 18:16:23 msapiro postfix/cleanup[26921]: 7002C340121:
> milter-discard: END-OF-MESSAGE from msapiro-enet.attlocal.net[10.211.115.100]:
> milter triggers DISCARD action; from=<mark at msapiro.net> to=<
> mark at ms2.msapiro.net> proto=SMTP helo=<msapiro.net>
> > Oct 12 18:16:23 msapiro postfix/smtpd[26916]: disconnect from
> msapiro-enet.attlocal.net[10.211.115.100] helo=1 mail=1 rcpt=2 data=1
> quit=1 commands=6
> > Oct 12 18:16:28 msapiro MailScanner[2489]: New Batch: Scanning 1
> messages, 1123 bytes
> > Oct 12 18:16:28 msapiro MailScanner[2489]: Virus and Content Scanning:
> Starting
> > Oct 12 18:16:30 msapiro MailScanner[2489]: Requeue: ED750235E9.AA31F to
> 2207A34012D
> > Oct 12 18:16:30 msapiro postfix/smtpd[26916]: connect from
> localhost[127.0.0.1]
> > Oct 12 18:16:30 msapiro postfix/smtpd[26916]: 63BC1340122:
> client=localhost[127.0.0.1]
> > Oct 12 18:16:30 msapiro postfix/cleanup[26921]: 63BC1340122: message-id=<
> 20181013011623.7002C340121 at msapiro.net>
> > Oct 12 18:16:30 msapiro postfix/qmgr[2472]: 63BC1340122: from=<
> mark at msapiro.net>, size=1635, nrcpt=1 (queue active)
> > Oct 12 18:16:30 msapiro postfix/smtpd[26916]: disconnect from
> localhost[127.0.0.1] ehlo=1 mail=1 rcpt=1 data=1 commands=4
> > Oct 12 18:16:30 msapiro MailScanner[2489]: Uninfected: Delivered 1
> messages
> > Oct 12 18:16:30 msapiro postfix/local[26969]: 63BC1340122: to=<
> mark at msapiro.net>, relay=local, delay=0.13, delays=0.08/0.01/0/0.04,
> dsn=2.0.0, status=sent (delivered to mailbox)
> > Oct 12 18:16:30 msapiro postfix/qmgr[2472]: 63BC1340122: removed
> > Oct 12 18:16:30 msapiro MailScanner[2489]: Deleted 1 messages from
> processing-database
>
> You will see this entry on the incoming message
>
> > Oct 12 18:16:23 msapiro postfix/smtpd[26916]: disconnect from
> msapiro-enet.attlocal.net[10.211.115.100] helo=1 mail=1 rcpt=2 data=1
> quit=1 commands=6
>
> has two rcpt commands, but this
>
> > Oct 12 18:16:30 msapiro postfix/smtpd[26916]: disconnect from
> localhost[127.0.0.1] ehlo=1 mail=1 rcpt=1 data=1 commands=4
>
> has only one. The original two rcpts were mark at msapiro.net (local) and
> mark at ms2.msapiro.net (remote) and apparently when the milter reinjected
> the scanned message the only rcpt was mark at msapiro.net.
>
> I did another test where both rcpts were local, mark at msapiro.net and
> root at msapiro.net with the same result.
>
> I did a third and fourth test where I reversed the order of the rcpt
> commands in the initial submission and the result is the ultimate
> delivery is only to the first rcpt in the initial submission whether or
> not that recipient is local or remote.
>
> --
> Mark Sapiro <mark at msapiro.net>        The highway is for gamblers,
> San Francisco Bay Area, California    better use your sense - B. Dylan
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>

-- 
Shawn Iverson, CETL
Director of Technology
Rush County Schools
765-932-3901 option 7
iversons at rushville.k12.in.us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20181013/8f6955b0/attachment.html>