v5.0.4-3

Fri Nov 11 03:35:13 UTC 2016

Hi Jerry, 

Had to revert from 5.0.4-3 to 5.0.3-7 on my production machine, due to multiple problems: 

a) MailScanner.conf is not updated but overwritten 
I noted that as I installed the 5.0.3 version, the previous MailScanner.conf placed by the 5.0.4 even gets updated 

Installing the MailScanner RPM ... 
Preparing... ################################################## 
MailScanner ################################################## 
Added new: Web Bug Replacement = https://s3.amazonaws.com/msv5/images/spacer.gif 
Added new: Lockfile Dir = /var/spool/MailScanner/incoming/Locks 
Added new: include /etc/MailScanner/conf.d/* 

Summary 
------- 
Read 361 settings from old /etc/MailScanner/MailScanner.conf.original 
Used 359 settings from old /etc/MailScanner/MailScanner.conf.original 
Used 4 default settings from new /etc/MailScanner/MailScanner.conf.dist 

b) After update from 5.0.3 to 5.0.4 I get error of Clamd 

Nov 11 04:20:14 BBCK003 postfix/cleanup[30285]: 4E6B5408C3: hold: header Received: from ms1.mailscanner.info (ms1.mailscanner.info [52.73.170.51])??by mail.vdb.eu (Postfix) with ESMTP id 4E6B5408C3??for <thom at vdb.nl>; Fri, 11 Nov 2016 04:20:14 +0100 (CET) from ms1.mailscanner.info[52.73.170.51]; from=<mailscanner-bounces+thom=vdb.nl at lists.mailscanner.info> to=<thom at vdb.nl> proto=ESMTP helo=<ms1.mailscanner.info> 
Nov 11 04:20:14 BBCK003 postfix/cleanup[30285]: 4E6B5408C3: message-id=<86108416.315833.1478834387763.JavaMail.zimbra at vdb.nl> 
Nov 11 04:20:14 BBCK003 postfix/smtpd[30282]: disconnect from ms1.mailscanner.info[52.73.170.51] 
Nov 11 04:20:16 BBCK003 MailScanner[30219]: New Batch: Scanning 1 messages, 11537 bytes 
Nov 11 04:20:16 BBCK003 MailScanner[30219]: Virus and Content Scanning: Starting 
Nov 11 04:20:16 BBCK003 MailScanner[30219]: Clamd::ERROR:: UNKNOWN CLAMD RETURN ./lstat() failed: Permission denied. ERROR :: /var/spool/MailScanner/incoming/30219 
Nov 11 04:20:16 BBCK003 MailScanner[30219]: Virus Scanning: Clamd found 1 infections 
Nov 11 04:20:16 BBCK003 MailScanner[30219]: Virus Scanning: Found 1 viruses 
Nov 11 04:20:19 BBCK003 MailScanner[30219]: Requeue: 4E6B5408C3.A5A1F to 15E7E0 
Nov 11 04:20:19 BBCK003 postfix/qmgr[28003]: 15E7E0: from=<mailscanner-bounces+thom=vdb.nl at lists.mailscanner.info>, size=10857, nrcpt=1 (queue active) 
Nov 11 04:20:19 BBCK003 MailScanner[30219]: Uninfected: Delivered 1 messages 
Nov 11 04:20:19 BBCK003 MailScanner[30219]: Deleted 1 messages from processing-database 
Nov 11 04:20:19 BBCK003 postfix/smtp[30292]: 15E7E0: to=<thom at vdb.nl>, relay=collectix.vdb.nl[81.171.0.79]:25, delay=5.7, delays=5.4/0.02/0.01/0.24, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as B7E931D4003E) 

After reverting version from 5.0.4 to 5.0.3 error is gone again. 

Met vriendelijke groet, Best regards, 

Thom van der Boon 
E-Mail: thom at vdb.nl 

===== 

Thom.H. van der Boon b.v. 
Transito 4 
6909 DA Babberich 
Tel.: +31 (0)88 4272727 
Fax: +31 (0)88 4272789 
Home Page: http://www.vdb.nl/ 

Van: "Thom van der Boon" <thom at vdb.nl> 
Aan: "MailScanner Discussion" <mailscanner at lists.mailscanner.info> 
Verzonden: Vrijdag 11 november 2016 04:19:47 
Onderwerp: Re: v5.0.4-3 

Hi Jerry, 

I found a possible problem: Update from 5.0.3 to 5.0.4 on RHEL: 

/etc/MailScanner/MailScanner.conf gets completely overwritten. There is no "old" or "backup" backup file of this file. 

I trusted you a little to much and did not backup my MailScanner.conf, had to reconfigure it :) 

Met vriendelijke groet, Best regards, 

Thom van der Boon 
E-Mail: thom at vdb.nl 

===== 

Thom.H. van der Boon b.v. 
Transito 4 
6909 DA Babberich 
Tel.: +31 (0)88 4272727 
Fax: +31 (0)88 4272789 
Home Page: http://www.vdb.nl/ 

Van: "Jerry Benton" <jerry.benton at mailborder.com> 
Aan: "MailScanner Discussion" <mailscanner at lists.mailscanner.info> 
Verzonden: Donderdag 10 november 2016 19:31:54 
Onderwerp: v5.0.4-3 

I have a release ready, but I wanted to get some feedback/testing 
before I put it out as the current version. Can some people do some 
testing on these please? I prefer to have more than 1 set of eyeballs 
and sanity checks on releases. Most of the changes are in the 
install.sh scripts. 

Debian 
https://s3.amazonaws.com/msv5/release/MailScanner-5.0.4-3.deb.tar.gz 

Nix 
https://s3.amazonaws.com/msv5/release/MailScanner-5.0.4-3.nix.tar.gz 

RHEL 
https://s3.amazonaws.com/msv5/release/MailScanner-5.0.4-3.rhel.tar.gz 

SuSE 
https://s3.amazonaws.com/msv5/release/MailScanner-5.0.4-3.suse.tar.gz 

- 
Jerry Benton 
www.mailborder.com 
+1 - 844-436-6245 

-- 
MailScanner mailing list 
mailscanner at lists.mailscanner.info 
http://lists.mailscanner.info/mailman/listinfo/mailscanner 

-- 
This message has been scanned for viruses and 
dangerous content by MailScanner , and is 
believed to be clean. 

-- 
MailScanner mailing list 
mailscanner at lists.mailscanner.info 
http://lists.mailscanner.info/mailman/listinfo/mailscanner 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20161111/0f3e4ee3/attachment.html>