Getting Past SpamAssassin

[Peter Ong]

> Check the following MailScanner.conf settings and make sure they are 
> *blank*:

Here's my config:
SpamAssassin User State Dir = /var/spool/MailScanner/spamassassin
SpamAssassin Local Rules Dir =
SpamAssassin Local State Dir = # /var/lib/spamassassin
SpamAssassin Default Rules Dir =

So let me confirm, you want me to make these settings blank?

p

----- Original Message -----

> From: "Steve Freegard" <steve.freegard at fsl.com>
> To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
> Sent: Monday, October 4, 2010 11:18:20 AM
> Subject: Re: Getting Past SpamAssassin
> 
> On 04/10/10 18:03, Peter Ong wrote:
> >
> > Under what circumstance could an email come through without passing
> through SpamAssassin? My configuration is as close to vanilla as
> possible. There have been no esoteric changes.
> >
> 
> Check the following MailScanner.conf settings and make sure they are 
> *blank*:
> 
> SpamAssassin User State Dir
> SpamAssassin Local Rules Dir
> SpamAssassin Local State Dir
> SpamAssassin Default Rules Dir
> 
> Otherwise you'll find SA will not find it's rules properly and will
> run 
> considerably degraded.
> 
> Cheers,
> Steve.
> -- 
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
> 
> Before posting, read http://wiki.mailscanner.info/posting
> 
> Support MailScanner development - buy the book off the website!