153 will not deliever from the Outbound

[Billy A. Pumphrey]

> 
> Hi,
> 
> Billy A. Pumphrey wrote:
> >> -----Original Message-----
> >> From: mailscanner-bounces at lists.mailscanner.info
[mailto:mailscanner-
> >> bounces at lists.mailscanner.info] On Behalf Of Billy A. Pumphrey
> >> Sent: Friday, August 18, 2006 9:30 AM
> >> To: MailScanner discussion
> >> Subject: 153 will not deliever from the Outbound
> >>
> >> Well I created a little mess for myself.  I configured the Exchange
> >> machine some with filtering and it was blocking some emails.  The
> >> maillog would say this:
> >>
> >> Aug 18 07:47:34 WoodenMS2 sendmail[2677]: k7IBlMHk002635:
> >> to=<cbutler at woodmaclaw.com>, delay=00:00:12, xdelay=00:00:00,
> >> mailer=esmtp, pri=121593, relay=[10.1.1.22] [10.1.1.22], dsn=4.0.0,
> >> stat=Deferred: Connection refused by [10.1.1.22]
> >>
> >> So seemingly the ones that got the connection refused message are
> > being
> >> held in MailScanner.
> >>
> >> I configured exchanges rules, and I no longer get these messages
and
> > all
> >> email is not getting rejected.  The Outbound used to be about 300
and
> >> seemingly they were all going to get delivered until it stuck on
153,
> >> well 152 now.  (minus one email in about 10 minutes)
> >>
> >> Am I missing something to get MailScanner to deliver these emails?
> >>
> >
> > I was trying to do some things to see the emails.  My inbound and
> > outbound are the default /var/spool/mqueue and /var/spool/mqueue.in
> >
> > Will someone give me some tips on how to manually manipulate the
emails?
> > My Inbound and Outbound links in MailWatch show nothing on the page
so I
> > am not able to see what is in them.
> >
> > How does someone copy/move the emails from mqueue into a mailbox so
that
> > one can sift through them?  As I am wanting to see what is in these
> > emails because people are wondering about specific emails and I want
to
> > at least make sure that I got them.
> 
> If you are using sendmail as your MTA on the mailscanner box you can
use
> the following from a command prompt:
> 
> mailq -Oqueuedirectory=/var/spool/mqueue.in
> 
> &
> 
> mailq -Oqueuedirectory=/var/spool/mqueue
> 
> To show the contents of the queues.
> 
> 


Ok, it is making some sense.  These are all deffered:


k7I6YIjY018427    83988 Fri Aug 18 02:34
<eFile at fileandserve.lexisnexis.com>
                 (Deferred: Connection timed out with [10.1.1.22])
                                         <dmontana at woodmaclaw.com>
k7I4T9ZP012437    10234 Fri Aug 18 00:29
<1.34418.36303137343931.b at ramailer.real
          7BIT   (Deferred: Connection timed out with [10.1.1.22])
                                         <kmahaney at woodmaclaw.com>
k7I6XeqG018290   120323 Fri Aug 18 02:33
<eFile at fileandserve.lexisnexis.com>
                 (Deferred: Connection timed out with [10.1.1.22])
                                         <abrigance at woodmaclaw.com>
k7I6XwYY018338   140230 Fri Aug 18 02:33
<eFile at fileandserve.lexisnexis.com>
                 (Deferred: Connection timed out with [10.1.1.22])
                                         <dtrachtman at woodmaclaw.com>
k7IBsgW3003307  2792502 Fri Aug 18 07:54 <jstephenson at reirealestate.com>
                 (Deferred: Connection timed out with [10.1.1.22])
                                         <mmonroe at WoodMacLaw.com>
k7IC5iZC004424  3437444 Fri Aug 18 08:08 MAILER-DAEMON
                 (Deferred: Connection timed out with [10.1.1.22])
                                         administrator at woodmclaw.com
k7IC3N3E004078  3867105 Fri Aug 18 08:03 <sesullivan at centexhomes.com>
                 (Deferred: Connection timed out with [10.1.1.22])
                                         <jhammond at woodmaclaw.com>

I did a few searches on knowing what the deffered does and the status of
these deffered emails but I go too confused.  From what I can understand
it means that it will try later.  Is this correct?