maillog logging level
Billy A. Pumphrey
bpumphrey at WOODMACLAW.COM
Wed May 4 16:31:59 IST 2005
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
Got it!
It is now working! YIPEE! I got the file and edited the line break problem, then I put the file on my web server, http://www.indysmash.com/downlaods/MailWatch.pm
So if someone wants to wget the file it is there. I don't know how long it will be there, a few years I suppose, but people can get it for a while.
Now the only problem "Cannot open directory: /var/spool/MailScanner/quarantine
I see that other have had this problem and I haven't searched real well on it yet, but I will start searching.
Billy Pumphrey
IT Manager
Wooden & McLaughlin
> -----Original Message-----
> From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> Behalf Of Steen, Glenn
> Sent: Tuesday, May 03, 2005 6:33 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: SV: maillog logging level
>
> To solve the MW problem, do as Martin says, find Walkers message in the
> mailwatch list (I think it was october 6:th it was sent), cut and paste
> that into a MailWatch.pm ... and use that instead of the stock one. There
> might be some linewraps, so ... be on the lookout for that.
> Or get someone who isn't @home and replying via crummy webmail (ie not
> close to that file:-) to send it to you... I even think someone did that
> today (to this list or the MW one... I don't recall which, sorry).
>
> It really works very nice.
>
> -- Glenn
>
>
> -----Ursprungligt meddelande-----
> Från: MailScanner mailing list genom Billy A. Pumphrey
> Skickat: ti 2005-05-03 22:39
> Till: MAILSCANNER at JISCMAIL.AC.UK
> Kopia:
> Ämne: Re: maillog logging level
> Another good link:
> http://forum.ev1servers.net/showpost.php?p=332319&postcount=85
>
>
> Billy Pumphrey
> IT Manager
> Wooden & McLaughlin
>
> > -----Original Message-----
> > From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> > Behalf Of Vladimir M Costa
> > Sent: Tuesday, May 03, 2005 2:16 PM
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Re: maillog logging level
> >
> > Or downgrade Perl DBD-MySQL to version 2.1028
> >
> > see:
> > http://mailwatch.sourceforge.net/faq.html
> >
> >
> > Vladimir Costa
> >
> >
> >
> > On Tue, 3 May 2005 17:51:40 +0100, Martin Hepworth wrote
> > > Billy
> > >
> > > this looks like a known problem with the current DBD::mysql and
> > > Mailwatch.pm from 0.5.1.
> > >
> > > You need a new mailwatch.pm from the MW list archives - October 6 2004
> > > by Walker Aumann.
> > >
> > > --
> > > Martin Hepworth
> > > Snr Systems Administrator
> > > Solid State Logic
> > > Tel: +44 (0)1865 842300
> > >
> > > Billy A. Pumphrey wrote:
> > > > Just about there.
> > > >
> > > > ---
> > > > MailScanner works now :) thank you
> > > > ---
> > > > To get my sendmail to work, I had to comment out the AuthOption=A in
> > the
> > > > sendmail.cf and take out the 127.0.0.1 out of the line in
> sendmail.cf.
> > > > I just couldn't figure out how to change the sendmail.cf file using
> m4
> > > > and the sendmail.mc file
> > > >
> > > > ---
> > > > Mailwatch problem
> > > > ---
> > > > After searching the mailwatch archives and finding a little bit of
> > > > information concerning the error that I am getting, I have not yet
> > found
> > > > an answer to this problem. I also subscribed to the mailing list
> but
> > > > they are not really active.
> > > >
> > > > May 3 04:02:23 WoodenMS MailScanner[13105]: Database ping failure
> > > > attempting to re-connect May 3 04:02:23 WoodenMS
> MailScanner[13105]:
> > > > Cannot insert row: MySQL server has gone away
> > > >
> > > > Billy Pumphrey
> > > > IT Manager
> > > > Wooden & McLaughlin
> > > >
> > > >
> > > >>-----Original Message-----
> > > >>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]
> On
> > > >>Behalf Of Billy A. Pumphrey
> > > >>Sent: Monday, May 02, 2005 12:01 PM
> > > >>To: MAILSCANNER at JISCMAIL.AC.UK
> > > >>Subject: Re: maillog logging level
> > > >>
> > > >>Thanks for the answer. I just commented this line out:
> > > >>DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
> > > >>
> > > >>Sendmail seems to work, along with the change that I did in my other
> > > >>response.
> > > >>
> > > >>Billy Pumphrey
> > > >>IT Manager
> > > >>Wooden & McLaughlin
> > > >>
> > > >>>-----Original Message-----
> > > >>>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]
> > > >
> > > > On
> > > >
> > > >>>Behalf Of Scott Silva
> > > >>>Sent: Monday, May 02, 2005 11:20 AM
> > > >>>To: MAILSCANNER at JISCMAIL.AC.UK
> > > >>>Subject: Re: maillog logging level
> > > >>>
> > > >>>Billy A. Pumphrey wrote:
> > > >>>
> > > >>>>---
> > > >>>>NOTE: I erased the rest of the message to get by the "looks like a
> > > >>>>script" error"
> > > >>>>---
> > > >>>>
> > > >>>>Ok, telnet
> > > >>>>
> > > >>>>To make it clear, I have a new MailScanner machine (the one that I
> > > >>
> > > >>am
> > > >>
> > > >>>>trying to get working) and the one in production that is out of
> > > >
> > > > date
> > > >
> > > >>on
> > > >>
> > > >>>>software and hardware.
> > > >>>>
> > > >>>>Anyway, I know that sendmail is having problems because when I
> > > >>
> > > >>telnet to
> > > >>
> > > >>>>the new one it looks like it tries and just comes back to the
> > > >>
> > > >>command
> > > >>
> > > >>>>prompt. If I telnet to the old one a connection is made and shows
> > > >>
> > > >>some
> > > >>
> > > >>>>stuff.
> > > >>>>
> > > >>>>Now,
> > > >>>>Should I just reinstall sendmail on top of mine or something? I
> > > >>>>installed sendmail by selecting the package when installing
> > > >>
> > > >>centos4.0.
> > > >>
> > > >>>>The service appears to be running ok. I did the ch config that
> > > >
> > > > the
> > > >
> > > >>book
> > > >>
> > > >>>>and web site talks about. A service MailScanner restart reads
> > > >>
> > > >>fine
> > > >>
> > > >>>>for the services starting (outgoing and incoming sendmail starts
> > > >>
> > > >>fine).
> > > >>
> > > >>>>If I look at the running services it has 1 sendmail running (under
> > > >>
> > > >>user
> > > >>
> > > >>>>smmsp) which is the one that is suppose to be running isn't it?
> > > >>>>
> > > >>>>I was comparing the service --status-all command between the 2
> > > >>
> > > >>machines.
> > > >>
> > > >>>>The services looks the same as far as MailScanner and sendmail
> > > >
> > > > look.
> > > >
> > > >>>>There is a sendmail running on each, and MailScanner running
> > > >>>>(MailScanner,incoming sendmail, outgoing sendmail)
> > > >>>
> > > >>>The default on ALL RedHat based sendmail installs is to only accept
> > > >>>local connections (IE.. from and to 127.0.0.1)
> > > >>>You will have to fix this. It is commented well in the sendmail.mc
> > > >>
> > > >>file.
> > > >>
> > > >>>Look for the section with;
> > > >>>
> > > >>>dnl # The following causes sendmail to only listen on the IPv4
> > > >>
> > > >>loopback
> > > >>
> > > >>>address
> > > >>>dnl # 127.0.0.1 and not on any other network devices. Remove the
> > > >>
> > > >>loopback
> > > >>
> > > >>>dnl # address restriction to accept email from the internet or
> > > >>
> > > >>intranet.
> > > >>
> > > >>>dnl #
> > > >>>DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
> > > >>>Your default will be different, as this has already been changed.
> > > >>>
> > > >>>--
> > > >>>"If you have ever eaten crow,
> > > >>>It don't taste like chicken!!"
> > > >>>
> > > >>>------------------------ MailScanner list ------------------------
> > > >>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > > >>>'leave mailscanner' in the body of the email.
> > > >>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > > >>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > > >>>
> > > >>>Support MailScanner development - buy the book off the website!
> > > >>
> > > >>------------------------ MailScanner list ------------------------
> > > >>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > > >>'leave mailscanner' in the body of the email.
> > > >>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > > >>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > > >>
> > > >>Support MailScanner development - buy the book off the website!
> > > >
> > > >
> > > > ------------------------ MailScanner list ------------------------
> > > > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > > > 'leave mailscanner' in the body of the email.
> > > > Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > > > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > > >
> > > > Support MailScanner development - buy the book off the website!
> > >
> > > **********************************************************************
> > >
> > > This email and any files transmitted with it are confidential and
> > > intended solely for the use of the individual or entity to whom they
> > > are addressed. If you have received this email in error please notify
> > > the system manager.
> > >
> > > This footnote confirms that this email message has been swept
> > > for the presence of computer viruses and is believed to be clean.
> > >
> > > **********************************************************************
> > >
> > > ------------------------ MailScanner list ------------------------
> > > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > > 'leave mailscanner' in the body of the email.
> > > Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > >
> > > Support MailScanner development - buy the book off the website!
> >
> >
> > --
> > Universidade do Vale do Paraíba - UNIVAP.
> > http://www.univap.br/
> >
> > ------------------------ MailScanner list ------------------------
> > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > 'leave mailscanner' in the body of the email.
> > Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> >
> > Support MailScanner development - buy the book off the website!
>
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
> Support MailScanner development - buy the book off the website!
>
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
> Support MailScanner development - buy the book off the website!
------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
Support MailScanner development - buy the book off the website!
More information about the MailScanner
mailing list