maillog logging level

[Julian Field]

    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

Find a copy of bunzip2.

Billy A. Pumphrey wrote:

>I tried searching the archives and found this:
>http://www.windischmann.de/
>
>If that is the answer I do not know how to use a bz2 file.
>
>Billy Pumphrey
>IT Manager
>Wooden & McLaughlin
>
>
>
>>-----Original Message-----
>>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
>>Behalf Of Martin Hepworth
>>Sent: Tuesday, May 03, 2005 11:52 AM
>>To: MAILSCANNER at JISCMAIL.AC.UK
>>Subject: Re: maillog logging level
>>
>>Billy
>>
>>this looks like a known problem with the current DBD::mysql and
>>Mailwatch.pm from 0.5.1.
>>
>>You need a new mailwatch.pm from the MW list archives - October 6 2004
>>by Walker Aumann.
>>
>>--
>>Martin Hepworth
>>Snr Systems Administrator
>>Solid State Logic
>>Tel: +44 (0)1865 842300
>>
>>
>>Billy A. Pumphrey wrote:
>>
>>
>>>Just about there.
>>>
>>>---
>>>MailScanner works now :) thank you
>>>---
>>>To get my sendmail to work, I had to comment out the AuthOption=A in
>>>
>>>
>the
>
>
>>>sendmail.cf and take out the 127.0.0.1 out of the line in
>>>
>>>
>sendmail.cf.
>
>
>>>I just couldn't figure out how to change the sendmail.cf file using
>>>
>>>
>m4
>
>
>>>and the sendmail.mc file
>>>
>>>---
>>>Mailwatch problem
>>>---
>>>After searching the mailwatch archives and finding a little bit of
>>>information concerning the error that I am getting, I have not yet
>>>
>>>
>found
>
>
>>>an answer to this problem.  I also subscribed to the mailing list
>>>
>>>
>but
>
>
>>>they are not really active.
>>>
>>>May  3 04:02:23 WoodenMS MailScanner[13105]: Database ping failure
>>>attempting to  re-connect May  3 04:02:23 WoodenMS
>>>
>>>
>MailScanner[13105]:
>
>
>>>Cannot insert row: MySQL server has  gone away
>>>
>>>Billy Pumphrey
>>>IT Manager
>>>Wooden & McLaughlin
>>>
>>>
>>>
>>>
>>>>-----Original Message-----
>>>>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]
>>>>
>>>>
>On
>
>
>>>>Behalf Of Billy A. Pumphrey
>>>>Sent: Monday, May 02, 2005 12:01 PM
>>>>To: MAILSCANNER at JISCMAIL.AC.UK
>>>>Subject: Re: maillog logging level
>>>>
>>>>Thanks for the answer.  I just commented this line out:
>>>>DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
>>>>
>>>>Sendmail seems to work, along with the change that I did in my other
>>>>response.
>>>>
>>>>Billy Pumphrey
>>>>IT Manager
>>>>Wooden & McLaughlin
>>>>
>>>>
>>>>
>>>>>-----Original Message-----
>>>>>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]
>>>>>
>>>>>
>>>On
>>>
>>>
>>>
>>>>>Behalf Of Scott Silva
>>>>>Sent: Monday, May 02, 2005 11:20 AM
>>>>>To: MAILSCANNER at JISCMAIL.AC.UK
>>>>>Subject: Re: maillog logging level
>>>>>
>>>>>Billy A. Pumphrey wrote:
>>>>>
>>>>>
>>>>>
>>>>>>---
>>>>>>NOTE: I erased the rest of the message to get by the "looks like a
>>>>>>script" error"
>>>>>>---
>>>>>>
>>>>>>Ok, telnet
>>>>>>
>>>>>>To make it clear, I have a new MailScanner machine (the one that I
>>>>>>
>>>>>>
>>>>am
>>>>
>>>>
>>>>
>>>>>>trying to get working) and the one in production that is out of
>>>>>>
>>>>>>
>>>date
>>>
>>>
>>>
>>>>on
>>>>
>>>>
>>>>
>>>>>>software and hardware.
>>>>>>
>>>>>>Anyway, I know that sendmail is having problems because when I
>>>>>>
>>>>>>
>>>>telnet to
>>>>
>>>>
>>>>
>>>>>>the new one it looks like it tries and just comes back to the
>>>>>>
>>>>>>
>>>>command
>>>>
>>>>
>>>>
>>>>>>prompt.  If I telnet to the old one a connection is made and shows
>>>>>>
>>>>>>
>>>>some
>>>>
>>>>
>>>>
>>>>>>stuff.
>>>>>>
>>>>>>Now,
>>>>>>Should I just reinstall sendmail on top of mine or something?  I
>>>>>>installed sendmail by selecting the package when installing
>>>>>>
>>>>>>
>>>>centos4.0.
>>>>
>>>>
>>>>
>>>>>>The service appears to be running ok.  I did the ch config that
>>>>>>
>>>>>>
>>>the
>>>
>>>
>>>
>>>>book
>>>>
>>>>
>>>>
>>>>>>and web site talks about.  A service  MailScanner  restart reads
>>>>>>
>>>>>>
>>>>fine
>>>>
>>>>
>>>>
>>>>>>for the services starting (outgoing and incoming sendmail starts
>>>>>>
>>>>>>
>>>>fine).
>>>>
>>>>
>>>>
>>>>>>If I look at the running services it has 1 sendmail running (under
>>>>>>
>>>>>>
>>>>user
>>>>
>>>>
>>>>
>>>>>>smmsp) which is the one that is suppose to be running isn't it?
>>>>>>
>>>>>>I was comparing the service --status-all command between the 2
>>>>>>
>>>>>>
>>>>machines.
>>>>
>>>>
>>>>
>>>>>>The services looks the same as far as MailScanner and sendmail
>>>>>>
>>>>>>
>>>look.
>>>
>>>
>>>
>>>>>>There is a sendmail running on each, and MailScanner running
>>>>>>(MailScanner,incoming sendmail, outgoing sendmail)
>>>>>>
>>>>>>
>>>>>The default on ALL RedHat based sendmail installs is to only accept
>>>>>local connections (IE.. from and to 127.0.0.1)
>>>>>You will have to fix this. It is commented well in the sendmail.mc
>>>>>
>>>>>
>>>>file.
>>>>
>>>>
>>>>
>>>>>Look for the section with;
>>>>>
>>>>>dnl # The following causes sendmail to only listen on the IPv4
>>>>>
>>>>>
>>>>loopback
>>>>
>>>>
>>>>
>>>>>address
>>>>>dnl # 127.0.0.1 and not on any other network devices. Remove the
>>>>>
>>>>>
>>>>loopback
>>>>
>>>>
>>>>
>>>>>dnl # address restriction to accept email from the internet or
>>>>>
>>>>>
>>>>intranet.
>>>>
>>>>
>>>>
>>>>>dnl #
>>>>>DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
>>>>>Your default will be different, as this has already been changed.
>>>>>
>>>>>--
>>>>>"If you have ever eaten crow,
>>>>>It don't taste like chicken!!"
>>>>>
>>>>>------------------------ MailScanner list ------------------------
>>>>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>>>>'leave mailscanner' in the body of the email.
>>>>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>>>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>>>>
>>>>>Support MailScanner development - buy the book off the website!
>>>>>
>>>>>
>>>>------------------------ MailScanner list ------------------------
>>>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>>>'leave mailscanner' in the body of the email.
>>>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>>>
>>>>Support MailScanner development - buy the book off the website!
>>>>
>>>>
>>>------------------------ MailScanner list ------------------------
>>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>>'leave mailscanner' in the body of the email.
>>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>>
>>>Support MailScanner development - buy the book off the website!
>>>
>>>
>>**********************************************************************
>>
>>This email and any files transmitted with it are confidential and
>>intended solely for the use of the individual or entity to whom they
>>are addressed. If you have received this email in error please notify
>>the system manager.
>>
>>This footnote confirms that this email message has been swept
>>for the presence of computer viruses and is believed to be clean.
>>
>>**********************************************************************
>>
>>------------------------ MailScanner list ------------------------
>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>'leave mailscanner' in the body of the email.
>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>
>>Support MailScanner development - buy the book off the website!
>>
>>
>
>------------------------ MailScanner list ------------------------
>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>'leave mailscanner' in the body of the email.
>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
>Support MailScanner development - buy the book off the website!
>
>
>

--
Julian Field
www.MailScanner.info
Buy the MailScanner book at www.MailScanner.info/store
Professional Support Services at www.MailScanner.biz
MailScanner thanks transtec Computers for their support

PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!