Mail-ClamAV-0.17 out - oops

[Dhawal Doshy]

    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

Peter Russell wrote:

> Well not perfect :(
>
> It installs but fails to work - i see the following in the logs.
>
> MailScanner[20430]: ClamAV Perl module not found, did you install it?
>
I am using CentOS 4 (i386), not only installs cleanly but also works
fine without any changes.

- dhawal

cpan> install D/DC/DCONWAY/Parse-RecDescent-1.94.tar.gz
- snip -
cpan> install I/IN/INGY/Inline-0.44.tar.gz
- snip -
cpan> install S/SA/SABECK/Mail-ClamAV-0.17.tar.gz
Running make for S/SA/SABECK/Mail-ClamAV-0.17.tar.gz
Fetching with LWP:

ftp://archive.progeny.com/CPAN/authors/id/S/SA/SABECK/Mail-ClamAV-0.17.tar.gz
Fetching with LWP:
  ftp://archive.progeny.com/CPAN/authors/id/S/SA/SABECK/CHECKSUMS
Checksum for
/root/.cpan/sources/authors/id/S/SA/SABECK/Mail-ClamAV-0.17.tar.gz ok
Mail-ClamAV-0.17/
Mail-ClamAV-0.17/Inline/
Mail-ClamAV-0.17/Inline/MakeMaker.pm
Mail-ClamAV-0.17/Makefile.PL
Mail-ClamAV-0.17/README
Mail-ClamAV-0.17/t/
Mail-ClamAV-0.17/t/Mail-ClamAV.t
Mail-ClamAV-0.17/t/eicarcom2.zip
Mail-ClamAV-0.17/t/virus.eml
Mail-ClamAV-0.17/config.pl
Mail-ClamAV-0.17/MANIFEST
Mail-ClamAV-0.17/INSTALL
Mail-ClamAV-0.17/ClamAV.pm
Mail-ClamAV-0.17/META.yml
Mail-ClamAV-0.17/Changes

  CPAN.pm: Going to build S/SA/SABECK/Mail-ClamAV-0.17.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Mail::ClamAV
cp ClamAV.pm blib/lib/Mail/ClamAV.pm
/usr/bin/perl -Mblib -MInline=NOISY,_INSTALL_ -MMail::ClamAV -e1 0.17
blib/arch
Starting Build Prepocess Stage
Finished Build Prepocess Stage

Starting Build Parse Stage
Finished Build Parse Stage

Starting Build Glue 1 Stage
Finished Build Glue 1 Stage

Starting Build Glue 2 Stage
Finished Build Glue 2 Stage

Starting Build Glue 3 Stage
Finished Build Glue 3 Stage

Starting Build Compile Stage
  Starting "perl Makefile.PL" Stage
Writing Makefile for Mail::ClamAV
  Finished "perl Makefile.PL" Stage

  Starting "make" Stage
make[1]: Entering directory
`/root/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'
/usr/bin/perl /usr/lib/perl5/5.8.5/ExtUtils/xsubpp  -typemap
/usr/lib/perl5/5.8.5/ExtUtils/typemap   ClamAV.xs > ClamAV.xsc && mv
ClamAV.xsc ClamAV.c
gcc -c  -I/root/.cpan/build/Mail-ClamAV-0.17 -I/usr/include -D_REENTRANT
-D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -pipe
-m32 -march=i386 -mtune=pentium4   -DVERSION=\"0.17\"
-DXS_VERSION=\"0.17\" -fPIC
"-I/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE"   ClamAV.c
Running Mkbootstrap for Mail::ClamAV ()
chmod 644 ClamAV.bs
rm -f blib/arch/auto/Mail/ClamAV/ClamAV.so
gcc  -shared -L/usr/local/lib ClamAV.o  -o
blib/arch/auto/Mail/ClamAV/ClamAV.so   -L/usr/lib -lz -lbz2 -lgmp
-L/usr/lib -lcurl -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err
-lk5crypto -lresolv -ldl -lz -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
-lresolv -lidn -lssl -lcrypto -lssl -lcrypto -lgssapi_krb5 -lkrb5
-lcom_err -lk5crypto -lresolv -ldl -lz -lz -lpthread -lclamav
chmod 755 blib/arch/auto/Mail/ClamAV/ClamAV.so
cp ClamAV.bs blib/arch/auto/Mail/ClamAV/ClamAV.bs
chmod 644 blib/arch/auto/Mail/ClamAV/ClamAV.bs
make[1]: Leaving directory
`/root/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'
  Finished "make" Stage

  Starting "make install" Stage
make[1]: Entering directory
`/root/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'
Installing
/root/.cpan/build/Mail-ClamAV-0.17/blib/arch/auto/Mail/ClamAV/ClamAV.so
Installing
/root/.cpan/build/Mail-ClamAV-0.17/blib/arch/auto/Mail/ClamAV/ClamAV.bs
Files found in blib/arch: installing files in blib/lib into architecture
dependent library tree
Writing
/root/.cpan/build/Mail-ClamAV-0.17/blib/arch/auto/Mail/ClamAV/.packlist
make[1]: Leaving directory
`/root/.cpan/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV'
  Finished "make install" Stage

  Starting Cleaning Up Stage
  Finished Cleaning Up Stage

Finished Build Compile Stage

Manifying blib/man3/Mail::ClamAV.3pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Mail-ClamAV....ok
All tests successful.
Files=1, Tests=10,  0 wallclock secs ( 0.47 cusr +  0.06 csys =  0.53 CPU)
  /usr/bin/make test -- OK
Running make install
Installing
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/Mail/ClamAV/ClamAV.so
Installing
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/Mail/ClamAV/ClamAV.bs
Files found in blib/arch: installing files in blib/lib into architecture
dependent library tree
Installing
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/Mail/ClamAV.pm
Installing /usr/share/man/man3/Mail::ClamAV.3pm
Writing
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/Mail/ClamAV/.packlist
Appending installation info to
/usr/lib/perl5/5.8.5/i386-linux-thread-multi/perllocal.pod
  /usr/bin/make install  -- OK

 From the maillog
ClamAVModule::INFECTED:: Eicar-Test-Signature::
./18352D382F8.BF2CB/msg-10988-1.txt

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!