Starting from scratch
Martin Hepworth
martinh at SOLID-STATE-LOGIC.COM
Tue Apr 5 09:56:08 IST 2005
In that case should work very well...
my 2.8Ghx Piv(HT) with 1.5GB DDR RAM does around 3000 messages per day
and rarely goes above 0.2 load av..(plus it's a SMB file server for my
AV update files)
--
Martin Hepworth
Snr Systems Administrator
Solid State Logic
Tel: +44 (0)1865 842300
Billy Pumphrey wrote:
> Thank you for the reply. 1024 is the max on it. I only process about 2400
> messages daily so 1024 should be good hey? I will go RAID1 then.
>
>
>>-----Original Message-----
>>From: Martin Hepworth [mailto:martinh at SOLID-STATE-LOGIC.COM]
>>Sent: Monday, April 04, 2005 11:55 AM
>>To: MAILSCANNER at JISCMAIL.AC.UK
>>Subject: Re: Starting from scratch
>>
>>Billy
>>
>>I'd buy more RAM, drop a disk and use RAID1 - RAID 5 with only 3 disk
>>will slow the I/O down quite alot.
>>
>>There's lots of nice stuff in SA3.02 so I'd drip feed you existing rules
>>into it, and make sure you have the URI-RBL's turned on too...
>>
>>Also watch out for the ALL_TRUSTED rules in SA 3.02 (see the comment in
>>latest spam.assassin.prefs.conf).
>>
>>
>>--
>>Martin Hepworth
>>Snr Systems Administrator
>>Solid State Logic
>>Tel: +44 (0)1865 842300
>>
>>
>>Billy Pumphrey wrote:
>>
>>>I searched the mailscanner archives at
>>>http://www.jiscmail.ac.uk/cgi-
>>
>>bin/wa.exe?S1=mailscanner&D=0&T=0&H=0&O=T&F=&S
>>
>>>=
>>>
>>>But I could not locate updates information. I also tried to find the
>>>recently topic of "Complete Build". I know that there is a ton of
>>>information in there but I just could not find it. I know that a lot is
>>>talked about what to run it on, however if I may inquire on my setup as
>>>Linux is not my environment of expertise. I will try to make my
>>
>>questions
>>
>>>short. My main and pretty much only question is what versions should I
>>
>>use?
>>
>>>What I have now:
>>>550mhz
>>>384 RAM
>>>IDE hard drive (desktop)
>>>
>>>I will be moving to:
>>>Server
>>>Dual 600PIII
>>>1024 RAM
>>>3x9.1GB RAID 5 Hard drives
>>>
>>>What I have now:
>>>Redhat 9 (Shrike)
>>>MailScanner 4.25
>>>Spamassassin 2.61
>>>MailStats for statistics
>>>Running RulesDuJour
>>>Running other rules too
>>>Sendmail version ??
>>>Sophos virus scanning
>>>
>>>In question to move to:
>>>Should I still use Redhat 9? Seems to work fine
>>>MailScanner 4.40.11
>>>Sendmails latest version 8.13.4
>>>Spamassassin latest version 3.0.2
>>>Different rule sets from the web sites
>>>
>>>------------------------ MailScanner list ------------------------
>>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>>'leave mailscanner' in the body of the email.
>>>Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
>>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>>
>>>Support MailScanner development - buy the book off the website!
>>
>>**********************************************************************
>>
>>This email and any files transmitted with it are confidential and
>>intended solely for the use of the individual or entity to whom they
>>are addressed. If you have received this email in error please notify
>>the system manager.
>>
>>This footnote confirms that this email message has been swept
>>for the presence of computer viruses and is believed to be clean.
>>
>>**********************************************************************
>>
>>------------------------ MailScanner list ------------------------
>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>'leave mailscanner' in the body of the email.
>>Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>
>>Support MailScanner development - buy the book off the website!
>>
>
>
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
> Support MailScanner development - buy the book off the website!
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote confirms that this email message has been swept
for the presence of computer viruses and is believed to be clean.
**********************************************************************
------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
Support MailScanner development - buy the book off the website!
More information about the MailScanner
mailing list