error on Mandrake 10

[ISO-8859-2] Marcin Ro¿ek marcin.rozek at IOS.EDU.PL
Fri Sep 10 21:36:33 IST 2004 

<x-flowed>
Hello,
i'm trying to install MS on fresh Mandrake 10, but:

Oh good, module ExtUtils::MakeMaker version 6.05 is already installed.

Oh good, module Net::CIDR version 0.09 is already installed.

Attempting to build and install perl-IO-stringy-2.108-1
Instalacja perl-IO-stringy-2.108-1.src.rpm
Wykonywanie(%prep): /bin/sh -e /var/tmp/rpm-tmp.34178
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ rm -rf IO-stringy-2.108
+ /usr/bin/gzip -dc /usr/src/RPM/SOURCES/IO-stringy-2.108.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd IO-stringy-2.108
+ exit 0
Wykonywanie(%build): /bin/sh -e /var/tmp/rpm-tmp.34178
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd IO-stringy-2.108
+ CFLAGS=-O2 -fomit-frame-pointer -pipe -march=i586 -mcpu=pentiumpro
+ perl Makefile.PL PREFIX=/var/tmp/perl-IO-stringy-root/usr
********************************************************************************
WARNING: do not set PREFIX in "perl Makefile.PL PREFIX=...", use 
%makeinstall_std instead
********************************************************************************
Checking if your kit is complete...
Looks good
Writing Makefile for IO-stringy
+ make
cp lib/IO/Lines.pm blib/lib/IO/Lines.pm
cp lib/IO/ScalarArray.pm blib/lib/IO/ScalarArray.pm
cp lib/IO/Stringy.pm blib/lib/IO/Stringy.pm
cp lib/IO/Wrap.pm blib/lib/IO/Wrap.pm
cp lib/IO/Scalar.pm.html blib/lib/IO/Scalar.pm.html
cp lib/IO/AtomicFile.pm blib/lib/IO/AtomicFile.pm
cp lib/IO/InnerFile.pm blib/lib/IO/InnerFile.pm
cp lib/IO/Scalar.pm blib/lib/IO/Scalar.pm
cp lib/IO/WrapTie.pm blib/lib/IO/WrapTie.pm
Manifying blib/man3/IO::Lines.3pm
Manifying blib/man3/IO::Stringy.3pm
Manifying blib/man3/IO::ScalarArray.3pm
Manifying blib/man3/IO::Wrap.3pm
Manifying blib/man3/IO::AtomicFile.3pm
Manifying blib/man3/IO::InnerFile.3pm
Manifying blib/man3/IO::Scalar.3pm
Manifying blib/man3/IO::WrapTie.3pm
+ make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.8.3 "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
t/simple............ok
t/two...............ok
All tests successful.
Files=6, Tests=116,  1 wallclock secs ( 0.95 cusr +  0.05 csys =  1.00 CPU)
+ exit 0
Wykonywanie(%install): /bin/sh -e /var/tmp/rpm-tmp.60680
+ umask 022
+ cd /usr/src/RPM/BUILD
+ cd IO-stringy-2.108
+ rm -rf /var/tmp/perl-IO-stringy-root
++ perl -V:installarchlib
+ eval 'installarchlib='\''/usr/lib/perl5/5.8.3/i386-linux-thread-multi'\'';'
++ installarchlib=/usr/lib/perl5/5.8.3/i386-linux-thread-multi
+ mkdir -p 
/var/tmp/perl-IO-stringy-root//usr/lib/perl5/5.8.3/i386-linux-thread-multi
+ make install
********************************************************************************
WARNING: you should use DESTDIR (in "make install") (neither PREFIX nor DESTDIR 
is set, this is weird)
********************************************************************************
Installing /var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/Lines.pm
Installing 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/ScalarArray.pm
Installing /var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/Stringy.pm
Installing /var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/Wrap.pm
Installing 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/Scalar.pm.html
Installing 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/AtomicFile.pm
Installing 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/InnerFile.pm
Installing /var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/Scalar.pm
Installing /var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/IO/WrapTie.pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Lines.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Stringy.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::ScalarArray.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Wrap.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::AtomicFile.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::InnerFile.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Scalar.3pm
Installing /var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::WrapTie.3pm
Writing 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi/auto/IO-stringy/.packlist
Appending installation info to 
/var/tmp/perl-IO-stringy-root/usr/lib/perl5/5.8.3/i386-linux-thread-multi/perllocal.pod
+ '[' -x /usr/lib/rpm/brp-compress ']'
+ /usr/lib/rpm/brp-compress
bzip2: Bad flag `-n'
bzip2, a block-sorting file compressor.  Version 1.0.2, 30-Dec-2001.

    usage: bzip2 [flags and input files in any order]

    -h --help           print this message
    -d --decompress     force decompression
    -z --compress       force compression
    -k --keep           keep (don't delete) input files
    -f --force          overwrite existing output files
    -t --test           test compressed file integrity
    -c --stdout         output to standard out
    -q --quiet          suppress noncritical error messages
    -v --verbose        be verbose (a 2nd -v gives more)
    -L --license        display software version & license
    -V --version        display software version & license
    -s --small          use less memory (at most 2500k)
    -1 .. -9            set block size to 100k .. 900k
    --fast              alias for -1
    --best              alias for -9

    If invoked as `bzip2', default action is to compress.
               as `bunzip2',  default action is to decompress.
               as `bzcat', default action is to decompress to stdout.

    If no file names are given, bzip2 compresses or decompresses
    from standard input to standard output.  You can combine
    short flags, so `-v -4' means the same as -v4 or -4v, &c.

(about 5 times the same info as above)

+ find /var/tmp/perl-IO-stringy-root/usr -type f -print
+ sed 's@^/var/tmp/perl-IO-stringy-root@@g'
+ grep -v perllocal.pod
+ grep -v '\.packlist'
++ cat IO-stringy-2.108-filelist
+ '[' '/usr/lib/perl5/site_perl/5.8.3/IO/Lines.pm
/usr/lib/perl5/site_perl/5.8.3/IO/ScalarArray.pm
/usr/lib/perl5/site_perl/5.8.3/IO/Stringy.pm
/usr/lib/perl5/site_perl/5.8.3/IO/Wrap.pm
/usr/lib/perl5/site_perl/5.8.3/IO/Scalar.pm.html
/usr/lib/perl5/site_perl/5.8.3/IO/AtomicFile.pm
/usr/lib/perl5/site_perl/5.8.3/IO/InnerFile.pm
/usr/lib/perl5/site_perl/5.8.3/IO/Scalar.pm
/usr/lib/perl5/site_perl/5.8.3/IO/WrapTie.pm
/usr/share/man/man3/IO::Lines.3pm
/usr/share/man/man3/IO::Stringy.3pm
/usr/share/man/man3/IO::ScalarArray.3pm
/usr/share/man/man3/IO::Wrap.3pm
/usr/share/man/man3/IO::AtomicFile.3pm
/usr/share/man/man3/IO::InnerFile.3pm
/usr/share/man/man3/IO::Scalar.3pm
/usr/share/man/man3/IO::WrapTie.3pmX' = X ']'
+ /usr/lib/rpm/brp-mandrake
Cleaning files...done
Compressing files...done
Stripping files...done
Relativisation of symlinks...done
Clean perl...done
Building libraries symlinks...done
Przetwarzanie plików: perl-IO-stringy-2.108-1
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Lines.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Stringy.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::ScalarArray.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Wrap.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::AtomicFile.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::InnerFile.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Scalar.3pm
b³±d: Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::WrapTie.3pm


B³êdy budowania RPM-a:
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Lines.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Stringy.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::ScalarArray.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Wrap.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::AtomicFile.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::InnerFile.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::Scalar.3pm
     Nie znaleziono pliku: 
/var/tmp/perl-IO-stringy-root/usr/share/man/man3/IO::WrapTie.3pm


The same error happened when MS tried to install Net::CIDR - when i downloaded 
Net:CIDR it installed smoothly. I guess when i download perl-IO-stringy it will 
install without problems too. I also suspect that "bzip2: Bad flag `-n'"-error 
will occur with all modules installed by MS. The question is what should i do to 
fix?
My system is Mandrake 10.0 Official. On 9.1 and 9.2 everything worked perfect.

I've searched the archives and i've found similar problem but without a solution...

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

</x-flowed>

More information about the MailScanner mailing list