adding additional sendmail process?

Ugo Bellavance ugob at CAMO-ROUTE.COM
Mon Apr 12 20:54:41 IST 2004


> -----Message d'origine-----
> De : Terry Hope [mailto:thope at BTHSOLUTIONS.COM] 
> Envoyé : 12 avril, 2004 15:28
> À : MAILSCANNER at JISCMAIL.AC.UK
> Objet : Re: RE : adding additional sendmail process?
> 
> 
> The ISP at the client side is blocking outgoing port 25 - the 
> mail server is
> NOT handled by this ISP - so the real problem is sending e-mail via my
> corporate e-mail account while I am on my home ISP.
> I can send mail via the corporate mail server when I am at a client
> company's site that does not block outbound port 25. So I 
> just need to be
> able to send out - preferably without needing any sort of 
> tunneling (this is
> just a single example of the issue - I have to support 
> multiple users with
> the same issue from other ISPs in the area) from the ISP that 
> blocks port
> 25.
> Changing ISPs is not an option - nor is providing dial-up or 
> VPN access at
> the corporate side.
> 

Finally, i think this http://www.sendmail.org/~gshapiro/8.10.Training/MSA.html 
Is what you're looking for...

> 
> > -----Original Message-----
> > From: MailScanner mailing list 
> > [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Ugo Bellavance
> > Sent: Monday, April 12, 2004 3:17 PM
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: RE : adding additional sendmail process?
> > 
> > 
> > > -----Message d'origine-----
> > > De : Terry Hope [mailto:thope at BTHSOLUTIONS.COM] 
> > > Envoyé : 12 avril, 2004 15:13
> > > À : MAILSCANNER at JISCMAIL.AC.UK
> > > Objet : adding additional sendmail process?
> > > 
> > > 
> > > Is there a way to have the init script start a third sendmail 
> > > process that
> > > uses a different config file? My ISP at home (cox.net) is 
> > > blocking port 25
> > 
> > Incoming or outgoing or both?
> > 
> > > so I can't relay through my corporate server (on it's own 
> > > corporate subnet
> > > without these blocked ports) with MailScanner running . I can 
> > > utilize the
> > > ISPs mail relay, but they have additional limitations on size 
> > > and content
> > > that I wish to avoid. From my research - it looks like the 
> > only way to
> > > resolve this is to have a sendmail process listening on a 
> > > different port
> > > (2025 maybe). I know that MailScanner is succesfully 
> > starting a listen
> > > process and a send process. I would like to configure it 
> to start an
> > > additional listen only process listening on a different port 
> > > number. How
> > > would I change the MailScanner initialization script to start (and
> > > stop/restart) a third sendmail process?
> > > 
> > > Thanx
> > > Terry Hope
> > > thope at bthsolutions.com
> > > 
> > 
> 




More information about the MailScanner mailing list