Mail Not Routing, stuck in /var/spool/mqueue.in

[lester lasad]

I am running MailScanner 4.21-9

The maillog is just queueing up the messages, it is routing but not a a good rate (bad performance).  I would run the command but the server that was having problems is not up, switched over to another server.

Same as above for the second output request.

I have not changed anything

Julian Field <mailscanner at ECS.SOTON.AC.UK> wrote:
Morning all,

Appears you are all having a similar problem.
Are you running 4.23-11 or 4.23-10? If -10 then upgrade to -11.

What does your maillog say is happening?
grep MailScanner /var/log/maillog | tail -70

What processes are running?
ps ax | grep -i mail

What have you changed from your previously-working system?


At 09:49 03/09/2003, you wrote:


>"Spicer, Kevin" wrote:
>
>Which queue?
>
>All are in the mqueue.in
>
>As I said, if you're happy to bypass MailScanner to get the mail delivered
>follow the instructions below.
>
>Tried running your commands and received the following:
>
> > service MailScanner stop
>
>Shutting down MailScanner daemons:
>
>MailScanner: [ OK ]
>
>incoming sendmail: [ OK ]
>
>outgoing sendmail: [ OK ]
>
> > mv /var/spool/mqueue.in/* /var/spool/mqueue
>
>sh: line 1: /bin/mv: Argument list too long
>
>
>
>
> >
> > "Spicer, Kevin" wrote:
> > Can you confirm whether email had completely stopped, or whether
> > MailScanner just wasn't keeping up with the queue?
> >
> > If you want to bypass MailScanner to clear the backlog... (assuming
> > RedHat syntax)
> >
> > service MailScanner stop [wait for all MailScanner
> > processes to disappear after running this before moving on] mv
> > /var/spool/mqueue.in/* /var/spool/mqueue service MailScanner start
> > [restart Mailscanner toprocess any newly arriving messages, see if it
> > copes] sendmail -q
> >
> > [this last command will take a very long time to complete as it will
> > attempt to deliver each mesasge in the queue, with your backlog this
> > could be a considerable period of time]
>
>
>
>BMRB International
>http://www.bmrb.co.uk
>+44 (0)20 8566 5000
>_________________________________________________________________
>This message (and any attachment) is intended only for the
>recipient and may contain confidential and/or privileged
>material. If you have received this in error, please contact the
>sender and delete this message immediately. Disclosure, copying
>or other action taken in respect of this email or in
>reliance on it is prohibited. BMRB International Limited
>accepts no liability in relation to any personal emails, or
>content of any email which does not directly relate to our
>business.
>
>
>Do you Yahoo!?
>Yahoo!
>SiteBuilder - Free, easy-to-use web site design software

--
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support

---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mailscanner.info/pipermail/mailscanner/attachments/20030903/48598dd4/attachment.html