spamassassin -tD creates higher score than MailScanner & SpamAssassin

Chris Tatro k0rnshell at CHARTER.NET
Sun Oct 5 18:04:11 IST 2003


This is a repost stupid me posted spam in the first one. Sorry....

I ran spamassassin -tD < /root/email-sample-spam.txt and the output is
below on spamassassin 2.6 and spamassassin rated it a 13.6.
But when I paste the contents of email-sample-spam.txt into an email and
send it through MailScanner Version 4.23-11 it only scores a 2.064.
My MailScanner.conf file is default except I turned off virus scanning
and turned on spam logging I posted it below also.
Does anyone know why this is happening is it a MailScanner issue or a
SpamAssassin issue or no issue at all just a miss configuration?
Please help....

Also I had previously been running SpamAssassin 2.55 and this message
had always scored a 5 when I sent it through MailScanner and now with
SpamAssassin 2.6 it only scores a 2 so I had to lower my Required
SpamAssassin Score = 2 to get it to catch it.

This is what my mail log says when I send email-sample-spam.txt in an
email through mailscanner:

Message h95Dvsqx018858 from 192.168.1.50 (tatroc at testdomain.com) to
testdomain.com is spam, SpamAssassin (score=2.064, required 2,
DRASTIC_REDUCED 2.00, HTML_MESSAGE 0.00, LINES_OF_YELLING 0.01,
REMOVE_SUBJ 0.05)



# spamassassin -tD < /root/email-sample-spam.txt
debug: is spam? score=13.613 required=5
tests=DATE_IN_PAST_12_24,DNS_FROM_RFCI_DSN,DRASTIC_REDUCED,FROM_HAS_MIXE
D_NUMS,FROM_HAS_MIXED_NUMS3,INVALID_MSGID,LINES_OF_YELLING,NO_REAL_NAME,
PYZOR_CHECK,RAZOR2_CF_RANGE_51_100,RAZOR2_CHECK,RCVD_IN_DSBL,RCVD_IN_NJA
BL,RCVD_IN_NJABL_RELAY,RCVD_IN_SORBS,REMOVE_SUBJ
Received: from localhost [127.0.0.1] by relay
        with SpamAssassin (2.60 1.212-2003-09-23-exp);
        Sun, 05 Oct 2003 08:42:59 -0500


Message-Id: <N1msdrbJXNPfV4wg9>
X-Spam-Flag: YES
X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on
relay
X-Spam-Level: *************
X-Spam-Status: Yes, hits=13.6 required=5.0 tests=DATE_IN_PAST_12_24,
        DNS_FROM_RFCI_DSN,DRASTIC_REDUCED,FROM_HAS_MIXED_NUMS,

FROM_HAS_MIXED_NUMS3,INVALID_MSGID,LINES_OF_YELLING,NO_REAL_NAME,
        PYZOR_CHECK,RAZOR2_CF_RANGE_51_100,RAZOR2_CHECK,RCVD_IN_DSBL,
        RCVD_IN_NJABL,RCVD_IN_NJABL_RELAY,RCVD_IN_SORBS,REMOVE_SUBJ
        autolearn=no version=2.60
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="----------=_3F801FE3.73C31184"

This is a multi-part message in MIME format.

------------=_3F801FE3.73C31184
Content-Type: text/plain
Content-Disposition: inline
Content-Transfer-Encoding: 8bit


Content analysis details:   (13.6 points, 5.0 required)

 pts rule name              description
---- ----------------------
--------------------------------------------------
 0.3 FROM_HAS_MIXED_NUMS    From: contains numbers mixed in with letters
 0.3 NO_REAL_NAME           From: does not include a real name
 2.0 FROM_HAS_MIXED_NUMS3   From: contains numbers mixed in with letters
 0.1 REMOVE_SUBJ            BODY: List removal information
 2.0 DRASTIC_REDUCED        BODY: Drastically Reduced
 0.0 LINES_OF_YELLING       BODY: A WHOLE LINE OF YELLING DETECTED
 1.6 RAZOR2_CF_RANGE_51_100 BODY: Razor2 gives confidence between 51 and
100
                            [cf: 100]
 0.9 RAZOR2_CHECK           Listed in Razor2 (http://razor.sf.net/)
 0.3 PYZOR_CHECK            Listed in Pyzor (http://pyzor.sf.net/)
 0.4 DATE_IN_PAST_12_24     Date: is 12 to 24 hours before Received:
date
 1.1 RCVD_IN_DSBL           RBL: Received via a relay in list.dsbl.org

[<http://dsbl.org/listing?ip=200.28.105.254>]
 1.3 RCVD_IN_NJABL_RELAY    RBL: NJABL: sender is confirmed open relay
                            [200.28.105.254 listed in dnsbl.njabl.org]
 0.1 RCVD_IN_SORBS          RBL: SORBS: sender is listed in SORBS
                            [63.10.249.142 listed in dnsbl.sorbs.net]
 1.4 DNS_FROM_RFCI_DSN      RBL: From: sender listed in
dsn.rfc-ignorant.org
 0.1 RCVD_IN_NJABL          RBL: Received via a relay in dnsbl.njabl.org
                            [200.28.105.254 listed in dnsbl.njabl.org]
 1.8 INVALID_MSGID          Message-Id is not valid, according to RFC
2822




My MailScanner.conf

# Main configuration file for the MailScanner E-Mail Virus Scanner
#
# It's good practice to check through configuration files to make sure
# they fit with your system and your needs, whatever you expect them to
# contain.
#
# Note: If your directories are symlinked (soft-linked) in any way,
#       please put their *real* location in here, not a path that
#       includes any links. You may get some very strange error
#       messages from some of the virus scanners if you don't.
#
# Note for Version 4.00 and above:
#       A lot of the settings can take a ruleset as well as just simple
#       values. These rulesets are files containing rules which are
applied
#       to the current message to calculate the value of the
configuration
#       option. The rules are checked in the order they appear in the
ruleset.
#
# Note for Version 4.03 and above:
#       As well as rulesets, you can now include your own functions in
#       here. Look at the directory containing Config.pm and you will
find
#       CustomConfig.pm. In here, you can add your own "value" function
and
#       an Initvalue function to set up any global state you need such
as
#       database connections. Then for a setting below, you can put:
#               Configuration Option = &ValueFunction
#       where "ValueFunction" is the name of the function you have
#       written in CustomConfig.pm.
#

#
# Definition of variables which are substituted into definitions below
#

# Set the directory containing all the reports in the required language
%report-dir% = /etc/MailScanner/reports/en

# Configuration directory containing this file
%etc-dir% = /etc/MailScanner

# Rulesets directory containing your ".rules" files
%rules-dir% = /etc/MailScanner/rules

# Enter a short identifying name for your organisation below, this is
# used to make the X-MailScanner headers unique for your organisation.
# Multiple servers within one site should use an identical value here
# to avoid adding multiple redundant headers where mail has passed
# through several servers within your organisation.
%org-name% = yoursite

#
# System settings
# ---------------
#

# How many MailScanner processes do you want to run at a time?
# There is no point increasing this figure if your MailScanner server
# is happily keeping up with your mail traffic.
# If you are running on a server with more than 1 CPU, or you have a
# high mail load (and/or slow DNS lookups) then you should see better
# performance if you increase this figure.
# If you are running on a small system with limited RAM, you should
# note that each child takes just over 20MB.
#
# As a rough guide, try 5 children per CPU. But read the notes above.
Max Children = 5

# User to run as (not normally used for sendmail)
#Run As User = mail
#Run As User = postfix
Run As User =

# Group to run as (not normally used for sendmail)
#Run As Group = mail
#Run As Group = postfix
Run As Group =

# How often (in seconds) should each process check the incoming mail
# queue for new messages? If you have a quiet mail server, you might
# want to increase this value so it causes less load on your server, at
# the cost of slightly increasing the time taken for an average message
# to be processed.
Queue Scan Interval = 5

# Set location of incoming mail queue
#
# This can be any one of
# 1. A directory name
#    Example: /var/spool/mqueue.in
# 2. A wildcard giving directory names
#    Example: /var/spool/mqueue.in/*
# 3. The name of a file containing a list of directory names,
#    which can in turn contain wildcards.
#    Example: /etc/MailScanner/mqueue.in.list.conf
#
Incoming Queue Dir = /var/spool/mqueue.in

# Set location of outgoing mail queue.
# This can also be the filename of a ruleset.
Outgoing Queue Dir = /var/spool/mqueue

# Set where to unpack incoming messages before scanning them
Incoming Work Dir = /var/spool/MailScanner/incoming

# Set where to store infected and message attachments (if they are kept)
# This can also be the filename of a ruleset.
Quarantine Dir = /var/spool/MailScanner/quarantine

# Set where to store the process id number so you can stop MailScanner
PID file = /var/run/MailScanner.pid

# To avoid resource leaks, re-start periodically
Restart Every = 14400

# Set whether to use postfix, sendmail, exim or zmailer.
# If you are using postfix, then see the "SpamAssassin User State Dir"
# setting near the end of this file
MTA = sendmail

# Set how to invoke MTA when sending messages MailScanner has created
# (e.g. to sender/recipient saying "found a virus in your message")
# This can also be the filename of a ruleset.
Sendmail = /usr/sbin/sendmail

# Sendmail2 is provided for Exim users.
# It is the command used to attempt delivery of outgoing
cleaned/disinfected
# messages.
# This is not usually required for sendmail.
# This can also be the filename of a ruleset.
#For Exim users: Sendmail2 = /usr/sbin/exim -C /etc/exim/exim_send.conf
#For sendmail users: Sendmail2 = /usr/sbin/sendmail
#Sendmail2 = /usr/sbin/sendmail -C /etc/exim/exim_send.conf
Sendmail2 = /usr/sbin/sendmail

#
# Processing Incoming Mail
# ------------------------
#

# In every batch of virus-scanning, limit the maximum
# a) number of unscanned messages to deliver
# b) number of potentially infected messages to unpack and scan
# c) total size of unscanned messages to deliver
# d) total size of potentially infected messages to unpack and scan

Max Unscanned Bytes Per Scan = 100000000
Max Unsafe Bytes Per Scan = 50000000
Max Unscanned Messages Per Scan = 30
Max Unsafe Messages Per Scan = 30

# Expand TNEF attachments using an external program (or a Perl module)?
# This should be "yes" unless the scanner you are using (Sophos, McAfee)
has
# the facility built-in. However, if you set it to "no", then the
filenames
# within the TNEF attachment will not be checked against the filename
rules.
Expand TNEF = yes

# Some versions of Microsoft Outlook generate unparsable Rich Text
# format attachments. Do we want to deliver these bad attachments
anyway?
# Setting this to yes introduces the slight risk of a virus getting
through,
# but if you have a lot of troubled Outlook users you might need to do
this.
# We are working on a replacement for the TNEF decoder.
# This can also be the filename of a ruleset.
Deliver Unparsable TNEF = no

# Where the MS-TNEF expander is installed.
# This is EITHER the full command (including maxsize option) that runs
# the external TNEF expander binary,
# OR the keyword "internal" which will make MailScanner use the Perl
# module that does the same job.
# They are both provided as I am unsure which one is faster and which
# one is capable of expanding more file formats (there are plenty!).
#
# The --maxsize option limits the maximum size that any expanded
attachment
# may be. It helps protect against Denial Of Service attacks in TNEF
files.
#TNEF Expander    = internal
# This can also be the filename of a ruleset.
TNEF Expander = /usr/bin/tnef --maxsize=100000000

# The maximum length of time the TNEF Expander is allowed to run for 1
message.
# (in seconds)
TNEF Timeout = 120

# Where the "file" command is installed.
# This is used for checking the content type of files, regardless of
their
# filename.
# To disable Filetype checking, set this value to blank.
File Command = #/usr/bin/file

# The maximum length of time the "file" command is allowed to run for 1
# batch of messages (in seconds)
File Timeout = 20

# The maximum size of any message including the headers. If this is set
to
# zero, then no size checking is done.
# This can also be the filename of a ruleset, so you can have different
# settings for different users. You might want to set this quite small
for
# dialup users so their email applications don't time out downloading
huge
# messages.
Maximum Message Size = 0


#
# Virus Scanning and Vulnerability Testing
# ----------------------------------------
#

# Do you want to scan email for viruses?
# A few people don't have a virus scanner licence and so want to disable
# all the virus scanning.
# NOTE: This switch actually switches on/off all processing of the email
#       messages. If you just want to switch off actual virus scanning,
#       then set "Virus Scanners = none" instead.
#
# If you want to be able to switch scanning on/off for different users
or
# different domains, set this to the filename of a ruleset.
# This can also be the filename of a ruleset.
Virus Scanning = no

# Which Virus Scanning package to use:
# sophos    from www.sophos.com, or
# sophossavi (also from www.sophos.com, using the SAVI perl module), or
# mcafee    from www.mcafee.com, or
# command   from www.command.co.uk, or
# kaspersky from www.kaspersky.com, or
# kavdaemonclient from www.kaspersky.com, or
# etrust    from http://www3.ca.com/Solutions/Product.asp?ID=156, or
# inoculate from www.cai.com/products/inoculateit.htm, or
# inoculan  from ftp.ca.com/pub/getbbs/linux.eng/inoctar.LINUX.Z, or
# nod32     from www.nod32.com, or
# f-secure  from www.f-secure.com, or
# f-prot    from www.f-prot.com, or
# panda     from www.pandasoftware.com, or
# rav       from www.ravantivirus.com, or
# antivir   from www.antivir.de, or
# clamav    from clamav.elektrapro.com, or
# trend     from www.trendmicro.com, or
# none      (no virus scanning at all)
#
# Note for McAfee users: do not use any symlinks with McAfee at all. It
is
#                        very strange but may not detect all viruses
when
#                        started from a symlink or scanning a directory
path
#                        including symlinks.
#
# Note: If you want to use multiple virus scanners, then this should be
a
# space-separated list of virus scanners. For example:
# Virus Scanners = sophos f-prot mcafee
#
# Note: Make sure that you check that the base installation directory in
the
#       3rd column of virus.scanners.conf matches the location you have
#       installed each of your virus scanners. The supplied
#       virus.scanners.conf file assumes the default installation
locations
#       recommended by each of the virus scanner installation guides.
#
Virus Scanners = none

# The maximum length of time the commercial virus scanner is allowed to
run
# for 1 batch of messages (in seconds).
Virus Scanner Timeout = 300

# Should I attempt to disinfect infected attachments and then deliver
# the clean ones. "Disinfection" involves removing viruses from files
# (such as removing macro viruses from documents). "Cleaning" is the
# replacement of infected attachments with "VirusWarning.txt" text
# attachments.
# This can also be the filename of a ruleset.
Deliver Disinfected Files = yes

# Strings listed here will be searched for in the output of the virus
scanners.
# It is used to list which viruses should be handled differently from
other
# viruses. If a virus name is given here, then
# 1) The sender will not be warned that he sent it
# 2) No attempt at true disinfection will take place
#    (but it will still be "cleaned" by removing the nasty attachments
#     from the message)
# 3) The recipient will not receive the message,
#    unless the "Still Deliver Silent Viruses" option is set
# Other words that can be put in this list are the 3 special keywords
#    HTML-IFrame   : inserting this will stop senders being warned about
#                    HTML Iframe tags, when they are not allowed.
#    HTML-Codebase : inserting this will stop senders being warned about
#                    HTML Object Codebase tags, when they are not
allowed.
#    HTML-Form     : inserting this will stop senders being warned about
#                    HTML Form tags, when they are not allowed.
#    All-Viruses   : inserting this will stop senders being warned about
#                    any virus, while still allowing you to warn senders
#                    about HTML-based attacks.
#
# This can also be the filename of a ruleset.
Silent Viruses = HTML-IFrame Klez Yaha-E Bugbear Braid-A WinEvar Palyh
Sobig Fizzer Ganda Mimail

# Still deliver (after cleaning) messages that contained viruses listed
# in the above option ("Silent Viruses") to the recipient?
# Setting this to "yes" is good because it shows management that
MailScanner
# is protecting them, but it is bad because they have to filter/delete
all
# the incoming virus warnings.
# This can also be the filename of a ruleset.
Still Deliver Silent Viruses = yes

# Should encrypted messages be blocked?
# This is useful if you are wary about your users sending encrypted
# messages to your competition.
# This can be a ruleset so you can block encrypted message to certain
domains.
Block Encrypted Messages = no

# Should unencrypted messages be blocked?
# This could be used to ensure all your users send messages outside your
# company encrypted to avoid snooping of mail to your business partners.
# This can be a ruleset so you can just check mail to certain
users/domains.
Block Unencrypted Messages = no

#
# Options specific to Sophos Anti-Virus
# -------------------------------------
#

# Anything on the next line that appears in brackets at the end of a
line
# of output from Sophos will cause the error/infection to be ignored.
# Use of this option is dangerous, and should only be used if you are
having
# trouble with lots of corrupt PDF files, for example.
# If you need to specify more than 1 string to find in the error
message,
# then put each string in quotes and separate them with a comma.
# For example:
#Allowed Sophos Error Messages = "corrupt", "format not supported"
Allowed Sophos Error Messages =

# The directory (or a link to it) containing all the Sophos *.ide files.
# This is only used by the "sophossavi" virus scanner, and is irrelevant
# for all other scanners.
Sophos IDE Dir = /usr/local/Sophos/ide

# The directory (or a link to it) containing all the Sophos *.so
libraries.
# This is only used by the "sophossavi" virus scanner, and is irrelevant
# for all other scanners.
Sophos Lib Dir = /usr/local/Sophos/lib

# SophosSAVI only: monitor each of these files for changes in size to
# detect when a Sophos update has happened. The date of the Sophos Lib
Dir
# is also monitored.
# This is only used by the "sophossavi" virus scanner, not the "sophos"
# scanner setting.
Monitors For Sophos Updates = /usr/local/Sophos/ide/*ides.zip

#
# Removing/Logging dangerous or potentially offensive content
# -----------------------------------------------------------
#

# Do you want to allow partial messages, which only contain a fraction
of
# the attachments, not the whole thing? There is absolutely no way to
# scan these "partial messages" properly for viruses, as MailScanner
never
# sees all of the attachment at the same time. Enabling this option can
# allow viruses through. You have been warned.
# This can also be the filename of a ruleset so you can, for example,
allow
# them in outgoing mail but not in incoming mail.
Allow Partial Messages = no

# Do you want to allow messages whose body is stored somewhere else on
the
# internet, which is downloaded separately by the user's email package?
# There is no way to guarantee that the file fetched by the user's email
# package is free from viruses, as MailScanner never sees it.
# This feature is dangerous as it can allow viruses to be fetched from
# other Internet sites by a user's email package. The user would just
# think it was a normal email attachment and would have been scanned by
# MailScanner.
# It is only currently supported by Netscape 6 anyway, and the only
people
# who it are the IETF. So I would strongly advise leaving this switched
off.
# This can also be the filename of a ruleset.
Allow External Message Bodies = no

# Do you want to allow <IFrame> tags in email messages? This is not a
good
# idea as it allows various Microsoft Outlook security vulnerabilities
to
# remain unprotected, but if you have a load of mailing lists sending
them,
# then you will want to allow them to keep your users happy.
# This can also be the filename of a ruleset, so you can allow them from
# known mailing lists but ban them from everywhere else.
Allow IFrame Tags = no

# Banning <IFrame> tags completely is likely to break some common HTML
# mailing lists, such as Dilbert and other important things like that.
# So before you implement any restriction on them, you can log the
sender
# of any message containing an <IFrame>, so that you can set the option
# above to be a ruleset allowing IFrame tags from named "From" addresses
# and banning all others.
# This can also be the filename of a ruleset.
Log IFrame Tags = no

# Do you want to allow <Form> tags in email messages? This is a bad idea
# as these are used as scams to pursuade people to part with credit card
# information and other personal data.
# This can also be the filename of a ruleset.
Allow Form Tags = no

# Do you want to allow <Object Codebase=...> tags in email messages?
# This is a bad idea as it leaves you unprotected against various
# Microsoft-specific security vulnerabilities. But if your users demand
# it, you can do it.
# This can also be the filename of a ruleset, so you can allow them just
# for specific users or domains.
Allow Object Codebase Tags = no

# Do you want to convert HTML messages containing <IFrame> or
# <Object Codebase=...> tags into plain text?
# This will only apply if you are also allowing the tags to be present
# using the configuration options above. You can allow messages
# that contain the tags, but convert them to plain text. This makes
# the HTML harmless, while still allowing your users to see the text
# content of the messages.
# This can also be the filename of a ruleset, so you can make this apply
# only to specific users or domains.
Convert Dangerous HTML To Text = no

# Do you want to convert all HTML messages into plain text?
# This is very useful for users who are children or are easily offended
# by nasty things like pornographic spam.
# This can also be the filename of a ruleset, so you can switch this
# feature on and off for particular users or domains.
Convert HTML To Text = no

#
# Attachment Filename Checking
# ----------------------------
#

# Set where to find the attachment filename ruleset.
# The structure of this file is explained elsewhere, but it is used to
# accept or reject file attachments based on their name, regardless of
# whether they are infected or not.
#
# This can also point to a ruleset, but the ruleset filename must end in
# ".rules" so that MailScanner can determine if the filename given is
# a ruleset or not!
Filename Rules = /etc/MailScanner/filename.rules.conf

# Set where to find the attachment filetype ruleset.
# The structure of this file is explained elsewhere, but it is used to
# accept or reject file attachments based on their content as determined
# by the "file" command, regardless of whether they are infected or not.
#
# This can also point to a ruleset, but the ruleset filename must end in
# ".rules" so that MailScanner can determine if the filename given is
# a ruleset or not!
#
# To disable this feature, set this to just "Filetype Rules =" or set
# the location of the file command to a blank string.
Filetype Rules = /etc/MailScanner/filetype.rules.conf

#
# Reports and Responses
# ---------------------
#

# Do you want to store copies of the infected attachments and messages?
# This can also be the filename of a ruleset.
Quarantine Infections = yes

# Do you want to quarantine the original *entire* message as well as
# just the infected attachments?
# This can also be the filename of a ruleset.
Quarantine Whole Message = no

# When you quarantine an entire message, do you want to store it as
# raw mail queue files (so you can easily send them onto users) or
# as human-readable files (header then body in 1 file)?
Quarantine Whole Messages As Queue Files = no

# Set where to find all the strings used so they can be translated into
# your local language.
# This can also be the filename of a ruleset so you can produce
different
# languages for different messages.
Language Strings = /etc/MailScanner/reports/en/languages.conf

# Set where to find the message text sent to users when one of their
# attachments has been deleted from a message.
# These can also be the filenames of rulesets.
Deleted Bad Content Message Report  =
/etc/MailScanner/reports/en/deleted.content.message.txt
Deleted Bad Filename Message Report =
/etc/MailScanner/reports/en/deleted.filename.message.txt
Deleted Virus Message Report        =
/etc/MailScanner/reports/en/deleted.virus.message.txt

# Set where to find the message text sent to users when one of their
# attachments has been deleted from a message and stored in the
quarantine.
# These can also be the filenames of rulesets.
Stored Bad Content Message Report  =
/etc/MailScanner/reports/en/stored.content.message.txt
Stored Bad Filename Message Report =
/etc/MailScanner/reports/en/stored.filename.message.txt
Stored Virus Message Report        =
/etc/MailScanner/reports/en/stored.virus.message.txt

# Set where to find the message text sent to users explaining about the
# attached disinfected documents.
# This can also be the filename of a ruleset.
Disinfected Report = /etc/MailScanner/reports/en/disinfected.report.txt

# Set where to find the HTML and text versions that will be added to the
# end of all clean messages, if "Sign Clean Messages" is set.
# These can also be the filenames of rulesets.
Inline HTML Signature = /etc/MailScanner/reports/en/inline.sig.html
Inline Text Signature = /etc/MailScanner/reports/en/inline.sig.txt

# Set where to find the HTML and text versions that will be inserted at
# the top of messages that have had viruses removed from them.
# These can also be the filenames of rulesets.
Inline HTML Warning = /etc/MailScanner/reports/en/inline.warning.html
Inline Text Warning = /etc/MailScanner/reports/en/inline.warning.txt

# Set where to find the messages that are delivered to the sender, when
they
# sent an email containing either an error, banned content, a banned
filename
# or a virus infection.
# These can also be the filenames of rulesets.
Sender Content Report        =
/etc/MailScanner/reports/en/sender.content.report.txt
Sender Error Report        =
/etc/MailScanner/reports/en/sender.error.report.txt
Sender Bad Filename Report =
/etc/MailScanner/reports/en/sender.filename.report.txt
Sender Virus Report        =
/etc/MailScanner/reports/en/sender.virus.report.txt

# Hide the directory path from all virus scanner reports sent to users.
# The extra directory paths give away information about your setup, and
# tend to just confuse users.
# This can also be the filename of a ruleset.
Hide Incoming Work Dir = yes

# Include the name of the virus scanner in each of the scanner reports.
# This also includes the translation of "MailScanner" in each of the
report
# lines resulting from one of MailScanner's own checks such as filename,
# filetype or dangerous HTML content. To change the name "MailScanner",
look
# in reports/...../languages.conf.
#
# Very useful if you use several virus scanners, but a bad idea if you
# don't want to let your customers know which scanners you use.
Include Scanner Name In Reports = yes

#
# Changes to Message Headers
# --------------------------
#

# Add this extra header to all mail as it is processed.
# This *must* include the colon ":" at the end.
# This can also be the filename of a ruleset.
Mail Header = X-%org-name%-MailScanner:

# Add this extra header to all messages found to be spam.
# This can also be the filename of a ruleset.
Spam Header = X-%org-name%-MailScanner-SpamCheck:

# Add this extra header if "Spam Score" = yes. The header will
# contain 1 character for every point of the SpamAssassin score.
Spam Score Header = X-%org-name%-MailScanner-SpamScore:

# Add this extra header to all mail as it is processed.
# The contents is set by "Information Header Value" and is intended for
# you to be able to insert a help URL for your users.
# If you don't want an information header at all, just comment out this
# setting or set it to be blank.
# This can also be the filename of a ruleset.
Information Header = X-%org-name%-MailScanner-Information:

# The character to use in the "Spam Score Header".
# Don't use: x as a score of 3 is "xxx" which the users will think is
porn,
#            # as it will cause confusion with comments in procmail as
well
#              as MailScanner itself,
#            * as it will cause confusion with pattern matches in
procmail,
#            . as it will cause confusion with pattern matches in
procmail,
#            ? as it will cause the users to think something went wrong.
# "s" is nice and safe and stands for "spam".
Spam Score Character = s

# Set the "Mail Header" to these values for clean/infected/disinfected
messages.
# This can also be the filename of a ruleset.
Clean Header Value       = Found to be clean
Infected Header Value    = Found to be infected
Disinfected Header Value = Disinfected

# Set the "Information Header" to this value.
# This can also be the filename of a ruleset.
Information Header Value = Please contact the ISP for more information

# Do you want the full spam report, or just a simple "spam / not spam"
report?
Detailed Spam Report = yes

# Do you want to include the numerical scores in the detailed
SpamAssassin
# report, or just list the names of the scores
Include Scores In SpamAssassin Report = yes

# What to do when you get several MailScanner headers in one message,
# from multiple MailScanner servers. Values are
#      "append"  : Append the new data to the existing header
#      "add"     : Add a new header
#      "replace" : Replace the old data with the new data
# Default is "append"
# This can also be the filename of a ruleset.
Multiple Headers = append

# Name of this host, or a name like "the MailScanner" if you want to
hide
# the real hostname. It is used in the Help Desk note contained in the
# virus warnings sent to users.
# This can also be the filename of a ruleset.
Hostname = the MailScanner

# If this is "no", then (as far as possible) messages which have already
# been processed by another MailScanner server will not have the clean
# signature added to the message. This prevents messages getting many
# copies of the signature as they flow through your site.
# This can also be the filename of a ruleset.
Sign Messages Already Processed = no

# Add the "Inline HTML Signature" or "Inline Text Signature" to the end
# of uninfected messages?
# This can also be the filename of a ruleset.
Sign Clean Messages = no

# Add the "Inline HTML Warning" or "Inline Text Warning" to the top of
# messages that have had attachments removed from them?
# This can also be the filename of a ruleset.
Mark Infected Messages = yes

# When a message is to not be virus-scanned (which may happen depending
# upon the setting of "Virus Scanning", especially if it is a ruleset),
# do you want to add the header advising the users to get their email
# virus-scanned by you?
# Very good for advertising your MailScanning service and encouraging
# users to give you some more money and sign up to virus scanning.
# This can also be the filename of a ruleset.
Mark Unscanned Messages = yes

# This is the text used by the "Mark Unscanned Messages" option above.
# This can also be the filename of a ruleset.
Unscanned Header Value = Not scanned: please contact your Internet
E-Mail Service Provider for details

# Do you want to deliver messages once they have been cleaned of any
# viruses?
# By making this a ruleset, you can re-create the "Deliver From Local"
# facility of previous versions.
Deliver Cleaned Messages = yes

#
# Notifications back to the senders of blocked messages
# -----------------------------------------------------
#

# Do you want to notify the people who sent you messages containing
# viruses or badly-named filenames?
# The default value has been changed to "no" as most viruses now fake
# sender addresses and therefore should be on the "Silent Viruses" list.
# This can also be the filename of a ruleset.
Notify Senders = no

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing viruses?
# This can also be the filename of a ruleset.
Notify Senders Of Viruses = yes

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing attachments that are blocked due to
# their filename or file contents?
# This can also be the filename of a ruleset.
Notify Senders Of Blocked Filenames Or Filetypes = yes

# *If* "Notify Senders" is set to yes, do you want to notify people
# who sent you messages containing other blocked content, such as
# partial messages or messages with external bodies?
# This can also be the filename of a ruleset.
Notify Senders Of Other Blocked Content = yes

# If you supply a space-separated list of message "precedence" settings,
# then senders of those messages will not be warned about anything you
# rejected. This is particularly suitable for mailing lists, so that any
# MailScanner responses do not get sent to the entire list.
Never Notify Senders Of Precedence = list bulk

#
# Changes to the Subject: line
# ----------------------------
#

# When the message has been scanned but no other subject line changes
# have happened, do you want modify the subject line?
# This can be 1 of 3 values:
#      no    = Do not modify the subject line, or
#      start = Add text to the start of the subject line, or
#      end   = Add text to the end of the subject line.
# This makes very good advertising of your MailScanning service.
# This can also be the filename of a ruleset.
Scanned Modify Subject = no # end

# This is the text to add to the start/end of the subject line if the
# "Scanned Modify Subject" option is set.
# This can also be the filename of a ruleset.
Scanned Subject Text = {Scanned}

# If the message contained a virus, do you want to modify the subject
line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Virus Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Virus Modify Subject" option is set.
# This can also be the filename of a ruleset.
Virus Subject Text = {Virus?}

# If an attachment triggered a filename check, but there was nothing
# else wrong with the message, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Filename Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Filename Modify Subject" option is set.
# You might want to change this so your users can see at a glance
# whether it just was just the filename that MailScanner rejected.
# This can also be the filename of a ruleset.
Filename Subject Text = {Filename?}

# If an attachment triggered a content check, but there was nothing
# else wrong with the message, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Content Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Content Modify Subject" option is set.
# You might want to change this so your users can see at a glance
# whether it just was just the content that MailScanner rejected.
# This can also be the filename of a ruleset.
Content Subject Text = {Dangerous Content?}

# If the message is spam, do you want to modify the subject line?
# This makes filtering in Outlook very easy.
# This can also be the filename of a ruleset.
Spam Modify Subject = yes

# This is the text to add to the start of the subject if the
# "Spam Modify Subject" option is set.
# This can also be the filename of a ruleset.
Spam Subject Text = {Spam?}

# This is just like the "Spam Modify Subject" option above, except that
# it applies then the score from SpamAssassin is higher than the
# "High SpamAssassin Score" value.
High Scoring Spam Modify Subject = yes

# This is just like the "Spam Subject Text" option above, except that
# it applies then the score from SpamAssassin is higher than the
# "High SpamAssassin Score" value.
High Scoring Spam Subject Text = {HighScoreSpam?}

#
# Changes to the Message Body
# ---------------------------
#

# When a virus or attachment is replaced by a plain-text warning,
# should the warning be in an attachment? If "no" then it will be
# placed in-line. This can also be the filename of a ruleset.
Warning Is Attachment = yes

# When a virus or attachment is replaced by a plain-text warning,
# and that warning is an attachment, this is the filename of the
# new attachment.
# This can also be the filename of a ruleset.
Attachment Warning Filename = VirusWarning.txt

# What character set do you want to use for the attachment that
# replaces viruses (VirusWarning.txt)?
# The default is "us-ascii" but if you speak anything other than
# English, you will probably want "ISO-8859-1" instead.
# This can also be the filename of a ruleset.
Attachment Encoding Charset = us-ascii

#
# Mail Archiving and Monitoring
# -----------------------------
#

# Space-separated list of any combination of
# 1. email addresses to which mail should be forwarded,
# 2. directory names where you want mail to be stored,
# 3. file names (they must already exist!) to which mail will be
appended
#    in "mbox" format suitable for most Unix mail systems.
#
# If you give this option a ruleset, you can control exactly whose mail
# is archived or forwarded. If you do this, beware of the legal
implications
# as this could be deemed to be illegal interception unless the police
have
# asked you to do this.
#Archive Mail = /var/spool/MailScanner/archive
Archive Mail =

#
# Notices to System Administrators
# --------------------------------
#

# Notify the local system administrators ("Notices To") when any
infections
# are found?
# This can also be the filename of a ruleset.
Send Notices = yes

# Include the full headers of each message in the notices sent to the
local
# system administrators?
# This can also be the filename of a ruleset.
Notices Include Full Headers = no

# Hide the directory path from all the system administrator notices.
# The extra directory paths give away information about your setup, and
# tend to just confuse users but are still useful for local sys admins.
# This can also be the filename of a ruleset.
Hide Incoming Work Dir in Notices = no

# What signature to add to the bottom of the notices.
# To insert a line-break in there, use the sequence "\n".
Notice Signature = -- \nMailScanner\nEmail Virus
Scanner\nwww.mailscanner.info

# The visible part of the email address used in the "From:" line of the
# notices. The <user at domain> part of the email address is set to the
# "Local Postmaster" setting.
Notices From = MailScanner

# Where to send the notices.
# This can also be the filename of a ruleset.
Notices To = postmaster

# Address of the local Postmaster, which is used as the "From" address
in
# virus warnings sent to users.
# This can also be the filename of a ruleset.
Local Postmaster = postmaster

#
# Spam Detection and Virus Scanner Definitions
# --------------------------------------------
#

# This is the name of the file that translates the names of the "Spam
List"
# values to the real DNS names of the spam blacklists.
Spam List Definitions = /etc/MailScanner/spam.lists.conf

# This is the name of the file that translates the names of the virus
# scanners into the commands that have to be run to do the actual
scanning.
Virus Scanner Definitions = /etc/MailScanner/virus.scanners.conf

#
# Spam Detection and Spam Lists (DNS blocklists)
# ----------------------------------------------
#

# Do you want to check messages to see if they are spam?
# Note: If you switch this off then *no* spam checks will be done at
all.
#       This includes both MailScanner's own checks and SpamAssassin.
#       If you want to just disable the "Spam List" feature then set
#       "Spam List =" (i.e. an empty list) in the setting below.
# This can also be the filename of a ruleset.
Spam Checks = yes

# This is the list of spam blacklists (RBLs) which you are using.
# See the "Spam List Definitions" file for more information about what
# you can put here.
# This can also be the filename of a ruleset.
Spam List = ORDB-RBL spamhaus.org spamcop.net NJABL

# This is the list of spam domain blacklists which you are using
# (such as the "rfc-ignorant" domains). See the "Spam List Definitions"
# file for more information about what you can put here.
# This can also be the filename of a ruleset.
Spam Domain List =

# If a message appears in at least this number of "Spam Lists" (as
defined
# above), then the message will be treated as "High Scoring Spam" and so
# the "High Scoring Spam Actions" will happen. You probably want to set
# this to 2 if you are actually using this feature. 5 is high enough
that
# it will never happen unless you use lots of "Spam Lists".
# This can also be the filename of a ruleset.
Spam Lists To Reach High Score = 5

# If an individual "Spam List" or "Spam Domain List" check takes longer
# that this (in seconds), the check is abandoned and the timeout noted.
Spam List Timeout = 10

# The maximum number of timeouts caused by any individual "Spam List" or
# "Spam Domain List" before it is marked as "unavailable". Once marked,
# the list will be ignored until the next automatic re-start (see
# "Restart Every" for the longest time it will wait).
# This can also be the filename of a ruleset.
Max Spam List Timeouts = 7

# Spam Whitelist:
# Make this point to a ruleset, and anything in that ruleset whose value
# is "yes" will *never* be marked as spam.
# This can also be the filename of a ruleset.
#Is Definitely Not Spam = no
Is Definitely Not Spam = /etc/MailScanner/rules/spam.whitelist.rules

# Spam Blacklist:
# Make this point to a ruleset, and anything in that ruleset whose value
# is "yes" will *always* be marked as spam.
# This can also be the filename of a ruleset.
Is Definitely Spam = no

# Setting this to yes means that spam found in the blacklist is treated
# as "High Scoring Spam" in the "Spam Actions" section below. Setting it
# to no means that it will be treated as "normal" spam.
# This can also be the filename of a ruleset.
Definite Spam Is High Scoring = no

#
# SpamAssassin
# ------------
#

# Do you want to find spam using the "SpamAssassin" package?
# This can also be the filename of a ruleset.
Use SpamAssassin = yes

# SpamAssassin is not very fast when scanning huge messages, so messages
# bigger than this value will be truncated to this length for
SpamAssassin
# testing. The original message will not be affected by this. This value
# is a good compromise as very few spam messages are bigger than this.
Max SpamAssassin Size = 90000

# This replaces the SpamAssassin configuration value 'required_hits'.
# If a message achieves a SpamAssassin score higher than this value,
# it is spam. See also the High SpamAssassin Score configuration option.
# This can also be the filename of a ruleset, so the SpamAssassin
# required_hits value can be set to different values for different
messages.
Required SpamAssassin Score = 2

# If a message achieves a SpamAssassin score higher than this value,
# then the "High Scoring Spam Actions" are used. You may want to use
# this to deliver moderate scores, while deleting very high scoring
messsages.
# This can also be the filename of a ruleset.
High SpamAssassin Score = 20

# Set this option to "yes" to enable the automatic whitelisting
functions
# available within SpamAssassin. This will cause addresses from which
you
# get real mail, to be marked so that it will never incorrectly spam-tag
# messages from those addresses.
SpamAssassin Auto Whitelist = no

# Set the location of the SpamAssassin user_prefs file. If you want to
# stop SpamAssassin doing all the RBL checks again, then you can add
# "skip_rbl_checks = 1" to this prefs file.
SpamAssassin Prefs File = /etc/MailScanner/spam.assassin.prefs.conf

# If SpamAssassin takes longer than this (in seconds), the check is
# abandoned and the timeout noted.
SpamAssassin Timeout = 40

# If SpamAssassin times out more times in a row than this, then it will
be
# marked as "unavailable" until MailScanner next re-starts itself.
# This means that remote network failures causing SpamAssassin trouble
will
# not mean your mail stops flowing.
Max SpamAssassin Timeouts = 20

# If the message sender is on any of the Spam Lists, do you still want
# to do the SpamAssassin checks? Setting this to "no" will reduce the
load
# on your server, but will stop the High Scoring Spam Actions from ever
# happening.
# This can also be the filename of a ruleset.
Check SpamAssassin If On Spam List = yes

# Do you want to always include the Spam Report in the SpamCheck
# header, even if the message wasn't spam?
# This can also be the filename of a ruleset.
Always Include SpamAssassin Report = no

# Do you want to include the "Spam Score" header. This shows 1 character
# (Spam Score Character) for every point of the SpamAssassin score. This
# makes it very easy for users to be able to filter their mail using
# whatever SpamAssassin threshold they want. For example, they just look
# for "sssss" for every message whose score is > 5, for example.
# This can also be the filename of a ruleset.
Spam Score = yes

#
# What to do with spam
# --------------------
#

# This is a list of actions to take when a message is spam.
# It can be any combination of the following:
#    deliver                 - deliver the message as normal
#    delete                  - delete the message
#    store                   - store the message in the quarantine
#    bounce                  - send a rejection message back to the
sender
#    forward user at domain.com - forward a copy of the message to
user at domain.com
#    striphtml               - convert all in-line HTML content to plain
text.
#                              You need to specify "deliver" as well for
the
#                              message to reach the original recipient.
#    attachment              - Convert the original message into an
attachment
#                              of the message. This means the user has
to take
#                              an extra step to open the spam, and stops
"web
#                              bugs" very effectively.
#
# Note that the bounce message is created in such a way as to stop it
# bouncing back to your site.
#
# This can also be the filename of a ruleset.
#Spam Actions = store forward anonymous at ecs.soton.ac.uk bounce
Spam Actions = deliver

# This is just like the "Spam Actions" option above, except that it
applies
# then the score from SpamAssassin is higher than the "High SpamAssassin
Score"
# value.
#    deliver                 - deliver the message as normal
#    delete                  - delete the message
#    store                   - store the message in the quarantine
#    bounce                  - send a rejection message back to the
sender
#    forward user at domain.com - forward a copy of the message to
user at domain.com
#    striphtml               - convert all in-line HTML content to plain
text.
#                              You need to specify "deliver" as well for
the
#                              message to reach the original recipient.
#    attachment              - Convert the original message into an
attachment
#                              of the message. This means the user has
to take
#                              an extra step to open the spam, and stops
"web
#                              bugs" very effectively.
#
# Note that the bounce message is created in such a way as to stop it
# bouncing back to your site.
#
# This can also be the filename of a ruleset.
High Scoring Spam Actions = deliver

# This is just like the "Spam Actions" option above, except that it
applies
# to messages that are *NOT* spam.
# The available options are the same as for "Spam Actions" except that
it
# makes no sense to bounce non-spam.
#    deliver                 - deliver the message as normal
#    delete                  - delete the message
#    store                   - store the message in the quarantine
#    forward user at domain.com - forward a copy of the message to
user at domain.com
#    striphtml               - convert all in-line HTML content to plain
text
#
# This can also be the filename of a ruleset.
Non Spam Actions = deliver

# Set where to find the messages that are delivered to the sender,
# when they have sent a message that was detected as spam and caused the
# "bounce" action to happen. This message is sent with its envelope
# constructed so that the message cannot bounce.
#
# There are 3 reports:
#   Sender Spam Report         -  sent when a message triggers both a
Spam
#                                 List and SpamAssassin,
#   Sender Spam List Report    -  sent when a message triggers a Spam
List,
#   Sender SpamAssassin Report -  sent when a message triggers
SpamAssassin.
#
# These can also be the filenames of rulesets.
Sender Spam Report         =
/etc/MailScanner/reports/en/sender.spam.report.txt
Sender Spam List Report    =
/etc/MailScanner/reports/en/sender.spam.rbl.report.txt
Sender SpamAssassin Report =
/etc/MailScanner/reports/en/sender.spam.sa.report.txt

# If you use the 'attachment' Spam Action or High Scoring Spam Action
# then this is the location of inline spam report that is inserted at
# the top of the message.
Inline Spam Warning =
/etc/MailScanner/reports/en/inline.spam.warning.txt


#
# Logging
# -------
#

# This is the syslog "facility" name that MailScanner uses. If you don't
# know what a syslog facility name is, then either don't change this
value
# or else go and read "man syslog.conf". The default value of "mail"
will
# cause the MailScanner logs to go into the same place as all your other
# mail logs.
Syslog Facility = mail

# Do you want all spam to be logged? Useful if you want to gather
# spam statistics from your logs, but can increase the system load quite
# a bit if you get a lot of spam.
Log Spam = yes

# Log all the filenames that are allowed by the Filename Rules, or just
# the filenames that are denied?
# This can also be the filename of a ruleset.
Log Permitted Filenames = no

# Log all the filenames that are allowed by the Filetype Rules, or just
# the filetypes that are denied?
# This can also be the filename of a ruleset.
Log Permitted Filetypes = no

#
# Advanced SpamAssassin Settings
# ------------------------------
#
# If you are using Postfix you may well need to use some of the settings
# below, as the home directory for the "postfix" user cannot be written
# to by the "postfix" user.
# You may also need to use these if you have installed SpamAssassin
# somewhere other than the default location.
#

# The per-user files (bayes, auto-whitelist, user_prefs) are looked
# for here and in ~/.spamassassin/. Note the files are mutable.
# If this is unset then no extra places are searched for.
# If using Postfix, you probably want to set this as shown in the
example
# line at the end of this comment, and do
#      mkdir /var/spool/MailScanner/spamassassin
#      chown postfix.postfix /var/spool/MailScanner/spamassassin
#SpamAssassin User State Dir = /var/spool/MailScanner/spamassassin
SpamAssassin User State Dir =

# This setting is useful if SpamAssassin is installed in an unusual
place,
# e.g. /opt/MailScanner. The install prefix is used to find some
fallback
# directories if neither of the following two settings work.
# If this is set then it adds to the list of places that are searched;
# otherwise it has no effect.
#SpamAssassin Install Prefix = /opt/MailScanner
SpamAssassin Install Prefix =

# The site-local rules are searched for here, and in
prefix/etc/spamassassin,
# prefix/etc/mail/spamassassin, /usr/local/etc/spamassassin,
/etc/spamassassin,
# /etc/mail/spamassassin, and maybe others.
# If this is set then it adds to the list of places that are searched;
# otherwise it has no effect.
#SpamAssassin Local Rules Dir = /etc/MailScanner/mail/spamassassin
SpamAssassin Local Rules Dir =

# The default rules are searched for here, and in
prefix/share/spamassassin,
# /usr/local/share/spamassassin, /usr/share/spamassassin, and maybe
others.
# If this is set then it adds to the list of places that are searched;
# otherwise it has no effect.
#SpamAssassin Default Rules Dir = /opt/MailScanner/share/spamassassin
SpamAssassin Default Rules Dir =

#
# Advanced Settings
# -----------------
#
# Don't bother changing anything below this unless you really know
# what you are doing, or else if MailScanner has complained about
# your "Minimum Code Status" setting.
#

# When trying to work out the value of configuration parameters which
are
# using a ruleset, this controls the behaviour when a rule is checking
the
# "To:" addresses.
# If this option is set to "yes", then the following happens when
checking
# the ruleset:
#   a) 1 recipient. Same behaviour as normal.
#   b) Several recipients, but all in the same domain (domain.com for
example).
#      The rules are checked for one that matches the string
"*@domain.com".
#   c) Several recipients, not all in the same domain.
#      The rules are checked for one that matches the string "*@*".
#
# If this option is set to "no", then some rules will use the result
they
# get from the first matching rule for any of the recipients of a
message,
# so the exact value cannot be predicted for messages with more than 1
# recipient.
#
# This value *cannot* be the filename of a ruleset.
Use Default Rules With Multiple Recipients = no

# Set Debug to "yes" to stop it running as a daemon and just process
# one batch of messages and then exit.
Debug = no

# Do you want to debug SpamAssassin from within MailScanner?
# Debug SpamAssassin = no
Debug SpamAssassin = yes


# This option is intended for people who want to log more information
# about messages than what is put in syslog. It is intended to be used
# with a Custom Function which has the side-effect of logging
information,
# perhaps to an SQL database, or any other processing you want to do
# after each message is processed.
# Its value is completely ignored, it is purely there to have side
# effects.
# If you want to use it, read CustomConfig.pm.
Always Looked Up Last = no

# When attempting delivery of outgoing messages, should we do it in the
# background or wait for it to complete? The danger of doing it in the
# background is that the machine load goes ever upwards while all the
# slow sendmail processes run to completion. However, running it in the
# foreground may cause the mail server to run too slowly.
Deliver In Background = yes

# Attempt immediate delivery of messages, or just place them in the
outgoing
# queue for the MTA to deliver when it wants to?
#      batch -- attempt delivery of messages, in batches of up to 20 at
once.
#      queue -- just place them in the queue and let the MTA find them.
# This can also be the filename of a ruleset. For example, you could use
a
# ruleset here so that messages coming to you are immediately delivered,
# while messages going to any other site are just placed in the queue in
# case the remote delivery is very slow.
Delivery Method = batch

# Are you using Exim with split spool directories? If you don't
understand
# this, the answer is probably "no". Refer to the Exim documentation for
# more information about split spool directories.
Split Exim Spool = no

# Where to put the virus scanning engine lock files.
# These lock files are used between MailScanner and the virus signature
# "autoupdate" scripts, to ensure that they aren't both working at the
# same time (which could cause MailScanner to let a virus through).
Lockfile Dir = /tmp

# How to lock spool files.
# Don't set this unless you *know* you need to.
# For sendmail, it defaults to "flock".
# For Exim, it defaults to "posix".
# No other type is implemented.
#Lock Type = flock

# Minimum acceptable code stability status -- if we come across code
# that's not at least as stable as this, we barf.
# This is currently only used to check that you don't end up using
untested
# virus scanner support code without realising it.
# Levels used are:
# none          - there may not even be any code.
# unsupported   - code may be completely untested, a contributed dirty
hack,
#                 anything, really.
# alpha         - code is pretty well untested. Don't assume it will
work.
# beta          - code is tested a bit. It should work.
# supported     - code *should* be reliable.
#
# Don't even *think* about setting this to anything other than "beta" or
# "supported" on a system that receives real mail until you have tested
it
# yourself and are happy that it is all working as you expect it to.
# Don't set it to anything other than "supported" on a system that could
# ever receive important mail.
#
# READ and UNDERSTAND the above text BEFORE changing this.
#
Minimum Code Status = supported



More information about the MailScanner mailing list