Newbie

[Jose Julian Buda]

Yes !!!

Sender: webmaster-vir at declude.com
IP Address: 216.58.174.203
 Recipient: jbuda at noticiasargentinas.com
   Subject: Test eicar.com file [eicarplain]
 MessageID: 02674C3B6E
    Report: ClamAV: eicar.com contains Eicar-Test-Signature 
            MailScanner: Executable DOS/Windows programs are dangerous in email (eicar.com)


on the report this mean that everything is fine?

if it does , thank you !!!!


----- Original Message ----- 
From: "Ugo Bellavance" <ugob at CAMO-ROUTE.COM>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Friday, November 21, 2003 3:28 PM
Subject: Re: Newbie


> -----Message d'origine-----
> De : Jose Julian Buda [mailto:jbuda at NOTICIASARGENTINAS.COM]
> Envoyé : Friday, November 21, 2003 1:19 PM
> À : MAILSCANNER at JISCMAIL.AC.UK
> Objet : Re: Newbie
> 
> 
> i replace this line with the correct
> 
> if i do what that site said :
> .....
> "Tell the outgoing Postfix not to provide an SMTP service: 
> Edit /etc/postfix/master.cf and comment out the following 
> line by inserting a "#" at the start of the line: 
> smtp   inet    n       -       y       -       -       smtpd"
> ....
> 
> 
> when i try to connect to my smtp server 
> 
> telnet my_ip 25
> 
> it refuse my conection , the port 25 is not open
> i dont understand
> how can i open that port?
> 

The postfix that receives your telnet connection is the incoming postfix, so just make sure you're not modifying /etc/postfix.in/master.cf

Also, disable any firewalling rules when testing (stay inside of another firewall, of course)

> 
> 
> ----- Original Message ----- 
> From: "Ugo Bellavance" <ugob at CAMO-ROUTE.COM>
> To: <MAILSCANNER at JISCMAIL.AC.UK>
> Sent: Friday, November 21, 2003 3:05 PM
> Subject: Re: Newbie
> 
> 
> > -----Message d'origine-----
> > De : Jose Julian Buda [mailto:jbuda at NOTICIASARGENTINAS.COM]
> > Envoyé : Friday, November 21, 2003 1:01 PM
> > À : MAILSCANNER at JISCMAIL.AC.UK
> > Objet : Re: Newbie
> > 
> > 
> > yes, i did
> > and nothing say about this error or configuration 
> > 
> > what this error mean?
> 
> It means that it cannot find the sendmail command (postfix 
> has a sendmail command, for compatibility).
> 
> do
> 
> which sendmail
> 
> on a console to see where is this command.
> > 
> > 
> > 
> > 
> > 
> > 
> > ----- Original Message ----- 
> > From: "Ugo Bellavance" <ugob at CAMO-ROUTE.COM>
> > To: <MAILSCANNER at JISCMAIL.AC.UK>
> > Sent: Friday, November 21, 2003 2:53 PM
> > Subject: Re: Newbie
> > 
> > 
> > > -----Message d'origine-----
> > > De : Jose Julian Buda [mailto:jbuda at NOTICIASARGENTINAS.COM]
> > > Envoyé : Friday, November 21, 2003 12:37 PM
> > > À : MAILSCANNER at JISCMAIL.AC.UK
> > > Objet : Newbie
> > > 
> > > 
> > > I want to replace RAV antivirus on my red hat server, and i 
> > > want to install 
> > > postfix+mailscanner+clamav
> > > 
> > > Postfix is working fine.
> > > Clamav is ok.
> > > 
> > > But ...the mailscanner does not work
> > > i have downloaded mailscanner 4.24-5 and installed
> > > on my /var/log/maillog
> > > 
> > > ...
> > > Nov 21 14:33:01 mailna MailScanner[22594]: MailScanner E-Mail 
> > > Virus Scanner version 4.24-5 starting... 
> > > Nov 21 14:33:02 mailna MailScanner[22594]: Could not read 
> > > executable /usr/lib/sendmail 
> > > Nov 21 14:33:02 mailna MailScanner[22594]: Error in line 121, 
> > > file "/usr/lib/sendmail" for sendmail does not exist (or can 
> > > not be read)
> > > ...
> > > 
> > > 
> > > i dont want to run sendmail, in fact i dont have sendmail , i 
> > > have postfix running already.
> > > what i need to put on this line(121) on the .conf file?
> > 
> > Have you followed directions in this document?
> > http://www.sng.ecs.soton.ac.uk/mailscanner/install/postfix.shtml
> > 
> > > 
> > > 
> > > thank you and sorry about my english.
> > > 
> > > jose julian buda
> > > 
> > 
>