Still battling with V4 and RaQ

[Gavin Nelmes-Crocker]

no it doesn't, odd the command in killproc works on its own but not in
the script.  Has anyone else got the same problem - fixed it yet

It means I have to go in and kill the ps each time.

Gavin

> -----Original Message-----
> From: MailScanner mailing list
> [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Mike Kercher
> Sent: 28 October 2002 02:19
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: Still battling with V4 and RaQ
>
>
> Question..I just upgraded MS on a RAQ4 and the restart
> command isn't working (again).  I had this problem before and
> I forget how I fixed it.  Does yours work?
>
> Mike
>
>
> -----Original Message-----
> From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]On
> Behalf Of Gavin Nelmes-Crocker
> Sent: Saturday, October 26, 2002 5:29 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: Still battling with V4 and RaQ
>
>
> of course your right mqueue -> ../../home/spool/mqueue been
> working on stuff all day and starting to get tired and not think
>
> > -----Original Message-----
> > From: MailScanner mailing list
> [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> > Behalf Of Mike Kercher
> > Sent: 26 October 2002 22:21
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Re: Still battling with V4 and RaQ
> >
> >
> > RAQ's have symlinks all over the place.  Make sure your
> > /var/spool/mqueue and /var/spool/mqueue.in ARE on the same
> filesystem
> > and not symlinks.  If they are symlinks, move one or the
> other to the
> > same filesystem to replace a symlink.
> >
> > -----Original Message-----
> > From: MailScanner mailing list
> [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> > Behalf > Of Gavin
>
> Nelmes-Crocker
> > Sent: Saturday, October 26, 2002 4:13 PM
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Still battling with V4 and RaQ
> >
> >
> > ok well I tried a different approach this time by upgrading
> to 5.6.1
> > and then installing still some symlinking but not too bad.
> >
> > Now I'm trying to get it actually work - it starts up ok
> but the mail
> > wasn't being processed so thinking this was tweaking
> required in the
> > conf file I played about now I think I have it right
> >
> > #
> > Incoming Queue Dir = /var/spool/mqueue.in
> >
> > # Set location of outgoing mail queue.
> > # This can also be the filename of a ruleset.
> > Outgoing Queue Dir = /var/spool/mqueue/q1
> >
> > but then I get this error
> >
> > [root MailScanner]# /var/spool/mqueue.in &
> /var/spool/mqueue/q1 must
> > be on the same filesystem/partition! at
> /usr/sbin/MailScanner line 555
> >
> > as far as I can see both of them are on the same
> filesystem/partition
> > am I being stupid? or just missing something basic I seem to have
> > taken 3 steps forward on the install but several back on getting it
> > running before I had it scanning but sendmail didn't deliver.
> >
> > Regards
> >
> > Gavin
> >
>