Problems after updating to 4.01-5

[Julian Field]

At 11:03 22/10/2002, you wrote:
>I tried the suggestions, but found the following:
>
>- ClamAV worked without problems with 4.01-3, even though code was set to
>'supported'.
>
>- ClamAV would not work with 4.01-5, even though code was set to 'none'.

And if you just leave the code alone and edit the conf file like you're
supposed to?


>Regards,
>
>Andrew G Allen
>email: mail at projectandrew.com | voice: +44 (0) 7958 540596
>
>--- Disclaimer ---
>This e-mail and any files transmitted with it are confidential and
>intended solely for the use of the individual or entity to whom they are
>addressed. If you have received this email in error, please notify the
>system manager.
>
> > To quote from the log output you included:
> >
> > FATAL: Encountered code that does not meet configured acceptable
> > stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
> > FATAL: *Please go and READ*
> > http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
> > it will tell you what to do.
> >
> > I suggest you do what it says.
> >
> > At 01:03 22/10/2002, you wrote:
> >>I just upgraded to 4.01-5 from 4.01-3 and when it starts to scan
> >> messages the following pops up in my console window:
> >>
> >>Looks like a problem... dumping status information at
> >>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
> >>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "none": scanning code status 0 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculate": scanning code status 4 - disinfect code status 4
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "panda": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "rav": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "command": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>FATAL: Encountered code that does not meet configured acceptable
> >> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
> >>FATAL: *Please go and READ*
> >>http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
> >> it will tell you what to do. at
> >>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1243
> >>Looks like a problem... dumping status information at
> >>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
> >>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "none": scanning code status 0 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculate": scanning code status 4 - disinfect code status 4
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "panda": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "rav": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "command": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>FATAL: Encountered code that does not meet configured acceptable
> >> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
> >>FATAL: *Please go and READ*
> >>http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
> >> it will tell you what to do. at
> >>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1243
> >>Looks like a problem... dumping status information at
> >>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
> >>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "none": scanning code status 0 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculate": scanning code status 4 - disinfect code status 4
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "panda": scanning code status 1 - disinfect code status 1 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
> >> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "rav": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "command": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
> >> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
> >>FATAL: Encountered code that does not meet configured acceptable
> >> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
> >>etc, etc....
> >>
> >>Any suggestions? It all worked ok before the upgrade. I am using F-prot
> >> with ClamAV by the way...
> >>
> >>Thanks.
> >>
> >>
> >>Andrew G Allen
> >>email: mail at projectandrew.com | voice: +44 (0) 7958 540596
> >>
> >>--- Disclaimer ---
> >>This e-mail and any files transmitted with it are confidential and
> >> intended solely for the use of the individual or entity to whom they
> >> are addressed. If you have received this email in error, please notify
> >> the system manager.
> >
> > --
> > Julian Field                Teaching Systems Manager
> > jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science Tel.
> > 023 8059 2817          University of Southampton
> >                              Southampton SO17 1BJ
> >
> > --
> > This message has been scanned for viruses and dangerous
> > content by MailScanner, and is believed to be clean.
>
>
>
>
>--
>This message has been scanned for viruses and dangerous
>content by MailScanner, and is believed to be clean.

--
Julian Field                Teaching Systems Manager
jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science
Tel. 023 8059 2817          University of Southampton
                             Southampton SO17 1BJ