<div class="markdown">
<p dir="auto">Thanks for the quick response.</p>
<p dir="auto">Here’s the output:</p>
<p dir="auto">Trying to setlogsock(unix)</p>
<p dir="auto">Reading configuration file /etc/MailScanner/MailScanner.conf<br>
Reading configuration file /etc/MailScanner/conf.d/README<br>
Read 467 hostnames from the phishing whitelist<br>
Read 10954 hostnames from the phishing blacklists</p>
<p dir="auto">Checking version numbers...<br>
Version number in MailScanner.conf (4.85.2) is correct.</p>
<p dir="auto">Your envelope_sender_header in spam.assassin.prefs.conf is correct.<br>
MailScanner setting GID to (89)<br>
MailScanner setting UID to (89)</p>
<p dir="auto">Checking for SpamAssassin errors (if you use it)...<br>
Using SpamAssassin results cache<br>
Connected to SpamAssassin cache database<br>
SpamAssassin reported no errors.<br>
I have found clamd scanners installed, and will use them all by default.<br>
Connected to Processing Attempts Database<br>
Created Processing Attempts Database successfully<br>
There are 0 messages in the Processing Attempts Database<br>
Using locktype = posix<br>
MailScanner.conf says "Virus Scanners = auto"</p>
<h1>Found these virus scanners installed: clamd</h1>
<p dir="auto">Filename Checks: Windows/DOS Executable (1 eicar.com)<br>
Other Checks: Found 1 problems<br>
Virus and Content Scanning: Starting<br>
Clamd::INFECTED::Eicar-Test-Signature :: ./1/<br>
Clamd::INFECTED:: Eicar-Test-Signature :: ./1/eicar.com<br>
Virus Scanning: Clamd found 2 infections<br>
Infected message 1 came from 10.1.1.1</p>
<h1>Virus Scanning: Found 2 viruses</h1>
<p dir="auto">Virus Scanner test reports:<br>
Clamd said "eicar.com was infected: Eicar-Test-Signature"</p>
<p dir="auto">If any of your virus scanners (clamd)<br>
are not listed there, you should check that they are installed correctly<br>
and that MailScanner is finding them correctly via its virus.scanners.conf.</p>
<p dir="auto">It says “found 1 problem”, but there’s no indication of what that problem is. Keep in mind that this output looks normal to me, but probably don’t know what normal looks like because I haven’t seen it yet :(</p>
<p dir="auto">I checked /var/log/maillog and /var/log/messages and I’m not seeing any errors.</p>
<p dir="auto">Brenda</p>
<p dir="auto">On 25 Oct 2015, at 4:16, Jerry Benton wrote:</p>
<blockquote>
<p dir="auto">Run:</p>
<p dir="auto">MailScanner --Lint</p>
<p dir="auto">-<br>
Jerry Benton<br>
<a href="http://www.mailborder.com">www.mailborder.com</a></p>
<blockquote>
<p dir="auto">On Oct 24, 2015, at 9:30 PM, <a href="mailto:b311b-ms@theotherbell.com">b311b-ms@theotherbell.com</a> wrote:</p>
<p dir="auto">I just installed MailScanner 4.85.2-3 with clamav 0.98.7-1.12, spamassassin 3.4.0-7.12 and postfix 2:2.6.6-2.15. All of this is running on an Amazon EC2 instance under Amazon Linux.</p>
<p dir="auto">Mail delivery is working to the point where messages reach their destination.</p>
<p dir="auto">I’ve temporarily enabled logging until I verify everything is working as it should. The issue is that there’s no log evidence that mailscanner is triggering spam assassin.</p>
<p dir="auto">The applicable settings from MailScanner.conf are as follows:</p>
<p dir="auto">Include Scores In SpamAssassin Report = yes<br>
Always Include SpamAssassin Report = no<br>
Use SpamAssassin = yes<br>
Max SpamAssassin Size = 200k<br>
Required SpamAssassin Score = 6<br>
High SpamAssassin Score = 10<br>
SpamAssassin Auto Whitelist = yes<br>
SpamAssassin Timeout = 75<br>
Max SpamAssassin Timeouts = 10<br>
SpamAssassin Timeouts History = 30<br>
Check SpamAssassin If On Spam List = yes<br>
Include Binary Attachments In SpamAssassin = no<br>
Cache SpamAssassin Results = yes<br>
SpamAssassin Cache Database File = /var/spool/MailScanner/incoming/SpamAssassin.cache.db<br>
SpamAssassin Rule Actions =<br>
Sender SpamAssassin Report = %report-dir%/sender.spam.sa.report.txt<br>
Log SpamAssassin Rule Actions = yes<br>
SpamAssassin Temporary Dir = /var/spool/MailScanner/incoming/SpamAssassin-Temp<br>
SpamAssassin User State Dir = /var/spool/MailScanner/spamassassin<br>
SpamAssassin Install Prefix =<br>
SpamAssassin Site Rules Dir = /etc/mail/spamassassin<br>
SpamAssassin Local Rules Dir =<br>
SpamAssassin Local State Dir = # /var/lib/spamassassin<br>
SpamAssassin Default Rules Dir =<br>
SQL SpamAssassin Config =<br>
MCP Required SpamAssassin Score = 1<br>
MCP High SpamAssassin Score = 10<br>
MCP Max SpamAssassin Timeouts = 20<br>
MCP Max SpamAssassin Size = 100k<br>
MCP SpamAssassin Timeout = 10<br>
MCP SpamAssassin Prefs File = %mcp-dir%/mcp.spam.assassin.prefs.conf<br>
MCP SpamAssassin User State Dir =<br>
MCP SpamAssassin Local Rules Dir = %mcp-dir%<br>
MCP SpamAssassin Default Rules Dir = %mcp-dir%<br>
MCP SpamAssassin Install Prefix = %mcp-dir%<br>
SpamAssassin Cache Timings = 1800,300,10800,172800,600<br>
Debug SpamAssassin = no</p>
<p dir="auto">Obviously I’ve missed something, but I’m not seeing it. Can someone point me to other config elements I need to check?</p>
<p dir="auto">Brenda</p>
<p dir="auto">-- <br>
MailScanner mailing list<br>
<a href="mailto:mailscanner@lists.mailscanner.info">mailscanner@lists.mailscanner.info</a><br>
<a href="http://lists.mailscanner.info/listinfo/mailscanner">http://lists.mailscanner.info/listinfo/mailscanner</a></p>
</blockquote>
<p dir="auto">-- <br>
MailScanner mailing list<br>
<a href="mailto:mailscanner@lists.mailscanner.info">mailscanner@lists.mailscanner.info</a><br>
<a href="http://lists.mailscanner.info/listinfo/mailscanner">http://lists.mailscanner.info/listinfo/mailscanner</a></p>
</blockquote>
</div>