MailScanner 5.1.2 not working
Shawn Iverson
iversons at rushville.k12.in.us
Thu Oct 25 11:40:52 UTC 2018
No changes should have happened in MailScanner.conf from 5.1.1 to 5.1.2.
Do you see any errors in the system logs? Is MailScanner starting and then
just stopping?
What do you see when you run "systemctl status mailscanner -l" ?
On Thu, Oct 25, 2018 at 7:38 AM Koby Peleg Hen <koby at mksoft.co.il> wrote:
> yes , try that with no lack.
> I did restart my vm and stil the same.
>
> Note : there is no log of MailScanner appear in the log file which is
> /var/log/mail.log.
>
> There is any major diff between 5.1.1 and 5.1.2 regards the
> MailScanner.conf ?
>
>
>
>
>
>
> נכתב על ידי Shawn Iverson via MailScanner, ב־25.10.2018 בשעה 14:26:
> > DISCARD instructs postfix to silently drop the message without a
> > REJECT. This is required so that MailScanner can proceed with scanning.
> >
> > Did you also try setting Debug = no and starting MailScanner?
> >
> > On Thu, Oct 25, 2018 at 7:24 AM Koby Peleg Hen <koby at mksoft.co.il
> > <mailto:koby at mksoft.co.il>> wrote:
> >
> > yes ,
> >
> > BTW it is all started with my upgrade to 5.1.2
> > why it keed DISCARD message ?
> >
> >
> > here is part of my conf...
> >
> > # This is the version number of the MailScanner distribution that
> > created
> > # this configuration file. Please do not change this value.
> > MailScanner Version Number = 5.1.2
> >
> > # Do not change this unless you absolutely have to, these numbers
> have
> > # been carefully calculated.
> > # They affect the length of time that different types of message are
> > # stored in the SpamAssassin cache which can be configured earlier in
> > # this file (look for "Cache").
> > # The numbers are all set in seconds. They are:
> > # 1. Non-Spam cache lifetime = 30 minutes
> > # 2. Spam (low scoring) cache lifetime = 5 minutes
> > # 3. High-Scoring spam cache lifetime = 3 hours
> > # 4. Viruses cache lifetime = 2 days
> > # 5. How often to check the cache for expired messages = 10 minutes
> > SpamAssassin Cache Timings = 1800,300,10800,172800,600
> >
> > # Set Debug to "yes" to stop it running as a daemon and just process
> > # one batch of messages and then exit.
> > Debug = yes
> >
> > # Do you want to debug SpamAssassin from within MailScanner?
> > Debug SpamAssassin = no
> >
> > # Set Run In Foreground to "yes" if you want MailScanner to operate
> > # normally in foreground (and not as a background daemon).
> > # Use this if you are controlling the execution of MailScanner
> > # with a tool like DJB's 'supervise' (see
> > http://cr.yp.to/daemontools.html).
> > Run In Foreground = no
> >
> >
> >
> >
> >
> >
> > > Koby,
> > >
> > > Yes, that is correct, as it should. Did you run
> > /usr/sbin/MailScanner
> > > with Debug = yes ?
> > >
> > >
> > >
> > > On Thu, Oct 25, 2018 at 7:06 AM Koby Peleg Hen <koby at mksoft.co.il
> > <mailto:koby at mksoft.co.il>
> > > <mailto:koby at mksoft.co.il <mailto:koby at mksoft.co.il>>> wrote:
> > >
> > > It seem that it always
> > >
> > > do : milter triggers DISCARD
> > >
> > >
> > > Oct 25 14:03:32 lab postfix/cleanup[23487]: E4206419CC:
> > > milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
> > <http://mail.mksoft.co.il>
> > > <http://mail.mksoft.co.il>[199.203.52.126]: milter triggers
> > DISCARD a
> > >
> > > ction; from=<koby at mksoft.co.il <mailto:koby at mksoft.co.il>>
> > <mailto:koby at mksoft.co.il <mailto:koby at mksoft.co.il>>
> > > to=<admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > <mailto:admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > > proto=ESMTP helo=<mail.mksoft.co.il
> > <http://mail.mksoft.co.il> <http://mail.mksoft.co.il>>
> > > Oct 25 14:03:32 lab postfix/smtpd[23484]: disconnect from
> > > mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>[199.203.52.126] ehlo=1
> > > mail=1 rcpt=1 data=1 quit=1 commands=5
> > >
> > > Here is the full log
> > >
> > > Oct 25 14:03:31 lab MSMilter[23469]: connect_callback: ip =
> > > 199.203.52.126
> > > Oct 25 14:03:31 lab MSMilter[23469]: helo_callback: Received:
> > from
> > > mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>
> > > Oct 25 14:03:31 lab MSMilter[23469]: msmailqueuetype = long
> > > Oct 25 14:03:31 lab MSMilter[23469]: envrcpt_callback: no
> client
> > > certificate requested
> > > Oct 25 14:03:31 lab MSMilter[23469]: envrcpt_callback: id =
> > > 42gkkq6cnMz750Q datestring = Thu, 25 Oct 2018 14:03:31 +0300
> > (IDT)
> > > Oct 25 14:03:31 lab postfix/smtpd[23484]: E4206419CC:
> > > client=mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>[199.203.52.126]
> > > Oct 25 14:03:31 lab postfix/cleanup[23487]: E4206419CC:
> > > message-id=<d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il
> > <mailto:d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il>>
> > > <mailto:d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il
> > <mailto:d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il>>
> > > Oct 25 14:03:32 lab MSMilter[23469]: eom_callback:
> > scannermode = yes
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: to =
> > > admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>
> > <mailto:admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: ip =
> > 199.203.52.126
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: id =
> > 42gkkq6cnMz750Q
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: incoming =
> > > /var/spool/MailScanner/milterin
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: file =
> > > /var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> > > Oct 25 14:03:32 lab MSMilter[23469]: Not locking spool file
> > > >>/var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> > > Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: scanner
> > mode enabled
> > > Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: no
> whitelist
> > > match, proceeding to blacklist test
> > > Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: End of
> Header
> > > detected
> > > Oct 25 14:03:32 lab MSMilter[23469]: body_callback: incoming =
> > > /var/spool/MailScanner/milterin
> > > Oct 25 14:03:32 lab MSMilter[23469]: body_callback: file =
> > > /var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> > > Oct 25 14:03:32 lab MSMilter[23469]: Not locking spool file
> > > >>/var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> > > Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: incoming =
> > > /var/spool/MailScanner/milterin
> > > Oct 25 14:03:32 lab postfix/cleanup[23487]: E4206419CC:
> > > *milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
> > <http://mail.mksoft.co.il>
> > > <http://mail.mksoft.co.il>[199.203.52.126]: milter triggers
> > DISCARD *a
> > > ction; from=<koby at mksoft.co.il <mailto:koby at mksoft.co.il>>
> > <mailto:koby at mksoft.co.il <mailto:koby at mksoft.co.il>>
> > > to=<admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > <mailto:admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > > proto=ESMTP helo=<mail.mksoft.co.il
> > <http://mail.mksoft.co.il> <http://mail.mksoft.co.il>>
> > > Oct 25 14:03:32 lab postfix/smtpd[23484]: disconnect from
> > > mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>[199.203.52.126] ehlo=1
> > > mail=1 rcpt=1 data=1 quit=1 commands=5
> > >
> > >
> > >
> > >
> > >
> > >> Hello Koby,
> > >>
> > >> It looks like the milter is functioning fine. We need to
> > focus on
> > >> MailScanner itself. The next step would be for MailScanner
> to
> > >> pick up the messages and scan them.
> > >>
> > >> With Debug on, what do you see in the log when your run
> > >> "/usr/sbin/MailScanner" one time?
> > >>
> > >>
> > >>
> > >> On Thu, Oct 25, 2018 at 4:46 AM Koby Peleg Hen
> > <koby at mksoft.co.il <mailto:koby at mksoft.co.il>
> > >> <mailto:koby at mksoft.co.il <mailto:koby at mksoft.co.il>>>
> wrote:
> > >>
> > >> I fix all permission on /Mailscanner > chown -R
> > postfix:mtagroup
> > >>
> > >>
> > >> But ,
> > >>
> > >> It is seems that all the mail stuck in the
> > >> /var/spool/mailscanner/milterin
> > >>
> > >> They are not send out to target...
> > >>
> > >>
> > >> here is the log from debug
> > >>
> > >>
> > >> Oct 25 11:40:28 lab postfix/smtpd[10203]: connect from
> > >> mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>[199.203.52.126]
> > >> Oct 25 11:40:28 lab MSMilter[9849]: connect_callback: ip
> =
> > >> 199.203.52.126
> > >> Oct 25 11:40:28 lab MSMilter[9849]: helo_callback:
> Received:
> > >> from mail.mksoft.co.il <http://mail.mksoft.co.il>
> > <http://mail.mksoft.co.il>
> > >> Oct 25 11:40:28 lab MSMilter[9849]: msmailqueuetype =
> long
> > >> Oct 25 11:40:28 lab MSMilter[9849]: envrcpt_callback: no
> > >> client certificate requested
> > >> Oct 25 11:40:28 lab MSMilter[9849]: envrcpt_callback: id
> =
> > >> 42ggYm3nHjz4TLC datestring = Thu, 25 Oct 2018 11:40:28
> > +0300 (IDT)
> > >> Oct 25 11:40:28 lab postfix/smtpd[10203]: 841DE40068:
> > >> client=mail.mksoft.co.il <http://mail.mksoft.co.il>
> > >> <http://mail.mksoft.co.il>[199.203.52.126]
> > >> Oct 25 11:40:28 lab postfix/cleanup[10206]: 841DE40068:
> > >>
> > message-id=<0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il
> > <mailto:0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il>>
> > >>
> > <mailto:0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il
> > <mailto:0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il>>
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback:
> > scannermode
> > >> = yes
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: to =
> > >> admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>
> > <mailto:admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>>
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: ip =
> > >> 199.203.52.126
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: id =
> > >> 42ggYm3nHjz4TLC
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback:
> incoming =
> > >> /var/spool/MailScanner/milterin
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: file =
> > >> /var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
> > >> Oct 25 11:40:29 lab MSMilter[9849]: Not locking spool
> file
> > >> >>/var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback:
> > scanner mode
> > >> enabled
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback: no
> > whitelist
> > >> match, proceeding to blacklist test
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: End of
> > >> Header detected
> > >> Oct 25 11:40:29 lab MSMilter[9849]: body_callback:
> > incoming =
> > >> /var/spool/MailScanner/milterin
> > >> Oct 25 11:40:29 lab MSMilter[9849]: body_callback: file =
> > >> /var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
> > >> Oct 25 11:40:29 lab MSMilter[9849]: Not locking spool
> file
> > >> >>/var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
> > >> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback:
> incoming =
> > >> /var/spool/MailScanner/milterin
> > >> Oct 25 11:40:29 lab postfix/cleanup[10206]: 841DE40068:
> > >> milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
> > <http://mail.mksoft.co.il>
> > >> <http://mail.mksoft.co.il>[199.203.52.126]: milter
> triggers
> > >> DISCARD a
> > >> ction; from=<koby at mksoft.co.il
> > <mailto:koby at mksoft.co.il>> <mailto:koby at mksoft.co.il
> > <mailto:koby at mksoft.co.il>>
> > >> to=<admin at ofc.mksoft.co.il
> > <mailto:admin at ofc.mksoft.co.il>> <mailto:admin at ofc.mksoft.co.il
> > <mailto:admin at ofc.mksoft.co.il>>
> > >> proto=ESMTP helo=<mail.mksoft.co.il
> > <http://mail.mksoft.co.il> <http://mail.mksoft.co.il>>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> נכתב על ידי Conz, ב־25.10.2018 בשעה 10:36:
> > >>
> > >>> Is there anything in the maillog ?
> > >>>
> > >>> Is your MTA delivering the emails or just keeping them
> > in the
> > >>> hold queue ?
> > >>>
> > >>>
> > >>> *usually* when MS stops picking up new messages it
> means it
> > >>> cannot access the mail queue (permissions) or is
> looking in
> > >>> the wrong location.
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> On 10/25/18 9:16 AM, Koby Peleg Hen wrote:
> > >>>>
> > >>>> Hello All ,
> > >>>>
> > >>>> Since my upgrade to 5.1.2 (yesterday) my mailscanner
> stop
> > >>>> function (not scanning)
> > >>>>
> > >>>> I did not change my mailscanner.conf which run as a
> > milter
> > >>>>
> > >>>>
> > >>>>
> > >>>> Here is the load process :
> > >>>>
> > >>>>
> > >>>> postfix 4628 1 0 Oct20 ? 00:00:00
> > MailScanner:
> > >>>> starting child
> > >>>> postfix 5740 1 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 5744 5740 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 5745 5740 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 5746 5740 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 5747 5740 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 5748 5740 0 16:10 ? 00:00:00
> > MSMilter Daemon
> > >>>> postfix 7309 2463 0 16:26 ? 00:00:00 anvil
> > -l -t
> > >>>> unix -u -c
> > >>>> root 7784 7464 0 16:39 pts/1 00:00:00 grep
> > >>>> --color=auto post*
> > >>>> postfix 22102 4628 0 13:07 ? 00:00:34
> > MailScanner:
> > >>>> waiting for messages
> > >>>> postfix 28635 2463 0 13:46 ? 00:00:00 qmgr
> -l -t
> > >>>> unix -u
> > >>>> postfix 30060 2463 0 15:32 ? 00:00:00 pickup
> > -l -t
> > >>>> unix -u -c
> > >>>> postfix 30150 2463 0 15:36 ? 00:00:00 tlsmgr
> > -l -t
> > >>>> unix -u -c
> > >>>> postfix 30775 4628 0 15:41 ? 00:00:34
> > MailScanner:
> > >>>> waiting for messages
> > >>>>
> > >>>>
> > >>>>
> > >>>> It is seen that some thing went wrong
> > >>>>
> > >>>>
> > >>>> Any clue...
> > >>>>
> > >>>>
> > >>>> Koby Peleg Hen
> > >>>>
> > >>>>
> > >>>
> > >>
> > >>
> > >> --
> > >> MailScanner mailing list
> > >> mailscanner at lists.mailscanner.info
> > <mailto:mailscanner at lists.mailscanner.info>
> > >> <mailto:mailscanner at lists.mailscanner.info
> > <mailto:mailscanner at lists.mailscanner.info>>
> > >> http://lists.mailscanner.info/mailman/listinfo/mailscanner
> > >>
> > >>
> > >>
> > >> --
> > >> Shawn Iverson, CETL
> > >> Director of Technology
> > >> Rush County Schools
> > >> 765-932-3901 option 7
> > >> iversons at rushville.k12.in.us
> > <mailto:iversons at rushville.k12.in.us>
> > <mailto:iversons at rushville.k12.in.us
> > <mailto:iversons at rushville.k12.in.us>>
> > >>
> > >>
> > >>
> > >
> > >
> > > --
> > > MailScanner mailing list
> > > mailscanner at lists.mailscanner.info
> > <mailto:mailscanner at lists.mailscanner.info>
> > > <mailto:mailscanner at lists.mailscanner.info
> > <mailto:mailscanner at lists.mailscanner.info>>
> > > http://lists.mailscanner.info/mailman/listinfo/mailscanner
> > >
> > >
> > >
> > > --
> > > Shawn Iverson, CETL
> > > Director of Technology
> > > Rush County Schools
> > > 765-932-3901 option 7
> > > iversons at rushville.k12.in.us
> > <mailto:iversons at rushville.k12.in.us>
> > <mailto:iversons at rushville.k12.in.us
> > <mailto:iversons at rushville.k12.in.us>>
> > >
> > >
> > >
> > >
> > >
> >
> >
> > --
> > MailScanner mailing list
> > mailscanner at lists.mailscanner.info
> > <mailto:mailscanner at lists.mailscanner.info>
> > http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >
> >
> >
> > --
> > Shawn Iverson, CETL
> > Director of Technology
> > Rush County Schools
> > 765-932-3901 option 7
> > iversons at rushville.k12.in.us <mailto:iversons at rushville.k12.in.us>
> >
> >
> >
> >
> >
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>
--
Shawn Iverson, CETL
Director of Technology
Rush County Schools
765-932-3901 option 7
iversons at rushville.k12.in.us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20181025/71aaaf0a/attachment.html>
More information about the MailScanner
mailing list