MailScanner 5.1.2 not working
Koby Peleg Hen
koby at mksoft.co.il
Thu Oct 25 11:24:02 UTC 2018
yes ,
BTW it is all started with my upgrade to 5.1.2
why it keed DISCARD message ?
here is part of my conf...
# This is the version number of the MailScanner distribution that created
# this configuration file. Please do not change this value.
MailScanner Version Number = 5.1.2
# Do not change this unless you absolutely have to, these numbers have
# been carefully calculated.
# They affect the length of time that different types of message are
# stored in the SpamAssassin cache which can be configured earlier in
# this file (look for "Cache").
# The numbers are all set in seconds. They are:
# 1. Non-Spam cache lifetime = 30 minutes
# 2. Spam (low scoring) cache lifetime = 5 minutes
# 3. High-Scoring spam cache lifetime = 3 hours
# 4. Viruses cache lifetime = 2 days
# 5. How often to check the cache for expired messages = 10 minutes
SpamAssassin Cache Timings = 1800,300,10800,172800,600
# Set Debug to "yes" to stop it running as a daemon and just process
# one batch of messages and then exit.
Debug = yes
# Do you want to debug SpamAssassin from within MailScanner?
Debug SpamAssassin = no
# Set Run In Foreground to "yes" if you want MailScanner to operate
# normally in foreground (and not as a background daemon).
# Use this if you are controlling the execution of MailScanner
# with a tool like DJB's 'supervise' (see http://cr.yp.to/daemontools.html).
Run In Foreground = no
> Koby,
>
> Yes, that is correct, as it should. Did you run /usr/sbin/MailScanner
> with Debug = yes ?
>
>
>
> On Thu, Oct 25, 2018 at 7:06 AM Koby Peleg Hen <koby at mksoft.co.il
> <mailto:koby at mksoft.co.il>> wrote:
>
> It seem that it always
>
> do : milter triggers DISCARD
>
>
> Oct 25 14:03:32 lab postfix/cleanup[23487]: E4206419CC:
> milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
> <http://mail.mksoft.co.il>[199.203.52.126]: milter triggers DISCARD a
>
> ction; from=<koby at mksoft.co.il> <mailto:koby at mksoft.co.il>
> to=<admin at ofc.mksoft.co.il> <mailto:admin at ofc.mksoft.co.il>
> proto=ESMTP helo=<mail.mksoft.co.il <http://mail.mksoft.co.il>>
> Oct 25 14:03:32 lab postfix/smtpd[23484]: disconnect from
> mail.mksoft.co.il <http://mail.mksoft.co.il>[199.203.52.126] ehlo=1
> mail=1 rcpt=1 data=1 quit=1 commands=5
>
> Here is the full log
>
> Oct 25 14:03:31 lab MSMilter[23469]: connect_callback: ip =
> 199.203.52.126
> Oct 25 14:03:31 lab MSMilter[23469]: helo_callback: Received: from
> mail.mksoft.co.il <http://mail.mksoft.co.il>
> Oct 25 14:03:31 lab MSMilter[23469]: msmailqueuetype = long
> Oct 25 14:03:31 lab MSMilter[23469]: envrcpt_callback: no client
> certificate requested
> Oct 25 14:03:31 lab MSMilter[23469]: envrcpt_callback: id =
> 42gkkq6cnMz750Q datestring = Thu, 25 Oct 2018 14:03:31 +0300 (IDT)
> Oct 25 14:03:31 lab postfix/smtpd[23484]: E4206419CC:
> client=mail.mksoft.co.il <http://mail.mksoft.co.il>[199.203.52.126]
> Oct 25 14:03:31 lab postfix/cleanup[23487]: E4206419CC:
> message-id=<d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il>
> <mailto:d0577bf9-22b8-f8ea-2525-16ca68a7b62e at mksoft.co.il>
> Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: scannermode = yes
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: to =
> admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: ip = 199.203.52.126
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: id = 42gkkq6cnMz750Q
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: incoming =
> /var/spool/MailScanner/milterin
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: file =
> /var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> Oct 25 14:03:32 lab MSMilter[23469]: Not locking spool file
> >>/var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: scanner mode enabled
> Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: no whitelist
> match, proceeding to blacklist test
> Oct 25 14:03:32 lab MSMilter[23469]: eoh_callback: End of Header
> detected
> Oct 25 14:03:32 lab MSMilter[23469]: body_callback: incoming =
> /var/spool/MailScanner/milterin
> Oct 25 14:03:32 lab MSMilter[23469]: body_callback: file =
> /var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> Oct 25 14:03:32 lab MSMilter[23469]: Not locking spool file
> >>/var/spool/MailScanner/milterin/temp-42gkkq6cnMz750Q
> Oct 25 14:03:32 lab MSMilter[23469]: eom_callback: incoming =
> /var/spool/MailScanner/milterin
> Oct 25 14:03:32 lab postfix/cleanup[23487]: E4206419CC:
> *milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
> <http://mail.mksoft.co.il>[199.203.52.126]: milter triggers DISCARD *a
> ction; from=<koby at mksoft.co.il> <mailto:koby at mksoft.co.il>
> to=<admin at ofc.mksoft.co.il> <mailto:admin at ofc.mksoft.co.il>
> proto=ESMTP helo=<mail.mksoft.co.il <http://mail.mksoft.co.il>>
> Oct 25 14:03:32 lab postfix/smtpd[23484]: disconnect from
> mail.mksoft.co.il <http://mail.mksoft.co.il>[199.203.52.126] ehlo=1
> mail=1 rcpt=1 data=1 quit=1 commands=5
>
>
>
>
>
>> Hello Koby,
>>
>> It looks like the milter is functioning fine. We need to focus on
>> MailScanner itself. The next step would be for MailScanner to
>> pick up the messages and scan them.
>>
>> With Debug on, what do you see in the log when your run
>> "/usr/sbin/MailScanner" one time?
>>
>>
>>
>> On Thu, Oct 25, 2018 at 4:46 AM Koby Peleg Hen <koby at mksoft.co.il
>> <mailto:koby at mksoft.co.il>> wrote:
>>
>> I fix all permission on /Mailscanner > chown -R postfix:mtagroup
>>
>>
>> But ,
>>
>> It is seems that all the mail stuck in the
>> /var/spool/mailscanner/milterin
>>
>> They are not send out to target...
>>
>>
>> here is the log from debug
>>
>>
>> Oct 25 11:40:28 lab postfix/smtpd[10203]: connect from
>> mail.mksoft.co.il <http://mail.mksoft.co.il>[199.203.52.126]
>> Oct 25 11:40:28 lab MSMilter[9849]: connect_callback: ip =
>> 199.203.52.126
>> Oct 25 11:40:28 lab MSMilter[9849]: helo_callback: Received:
>> from mail.mksoft.co.il <http://mail.mksoft.co.il>
>> Oct 25 11:40:28 lab MSMilter[9849]: msmailqueuetype = long
>> Oct 25 11:40:28 lab MSMilter[9849]: envrcpt_callback: no
>> client certificate requested
>> Oct 25 11:40:28 lab MSMilter[9849]: envrcpt_callback: id =
>> 42ggYm3nHjz4TLC datestring = Thu, 25 Oct 2018 11:40:28 +0300 (IDT)
>> Oct 25 11:40:28 lab postfix/smtpd[10203]: 841DE40068:
>> client=mail.mksoft.co.il
>> <http://mail.mksoft.co.il>[199.203.52.126]
>> Oct 25 11:40:28 lab postfix/cleanup[10206]: 841DE40068:
>> message-id=<0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il>
>> <mailto:0f84b726-ba58-998c-175e-73f5763034f6 at mksoft.co.il>
>> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback: scannermode
>> = yes
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: to =
>> admin at ofc.mksoft.co.il <mailto:admin at ofc.mksoft.co.il>
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: ip =
>> 199.203.52.126
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: id =
>> 42ggYm3nHjz4TLC
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: incoming =
>> /var/spool/MailScanner/milterin
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: file =
>> /var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
>> Oct 25 11:40:29 lab MSMilter[9849]: Not locking spool file
>> >>/var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
>> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback: scanner mode
>> enabled
>> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback: no whitelist
>> match, proceeding to blacklist test
>> Oct 25 11:40:29 lab MSMilter[9849]: eoh_callback: End of
>> Header detected
>> Oct 25 11:40:29 lab MSMilter[9849]: body_callback: incoming =
>> /var/spool/MailScanner/milterin
>> Oct 25 11:40:29 lab MSMilter[9849]: body_callback: file =
>> /var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
>> Oct 25 11:40:29 lab MSMilter[9849]: Not locking spool file
>> >>/var/spool/MailScanner/milterin/temp-42ggYm3nHjz4TLC
>> Oct 25 11:40:29 lab MSMilter[9849]: eom_callback: incoming =
>> /var/spool/MailScanner/milterin
>> Oct 25 11:40:29 lab postfix/cleanup[10206]: 841DE40068:
>> milter-discard: END-OF-MESSAGE from mail.mksoft.co.il
>> <http://mail.mksoft.co.il>[199.203.52.126]: milter triggers
>> DISCARD a
>> ction; from=<koby at mksoft.co.il> <mailto:koby at mksoft.co.il>
>> to=<admin at ofc.mksoft.co.il> <mailto:admin at ofc.mksoft.co.il>
>> proto=ESMTP helo=<mail.mksoft.co.il <http://mail.mksoft.co.il>>
>>
>>
>>
>>
>>
>> נכתב על ידי Conz, ב־25.10.2018 בשעה 10:36:
>>
>>> Is there anything in the maillog ?
>>>
>>> Is your MTA delivering the emails or just keeping them in the
>>> hold queue ?
>>>
>>>
>>> *usually* when MS stops picking up new messages it means it
>>> cannot access the mail queue (permissions) or is looking in
>>> the wrong location.
>>>
>>>
>>>
>>>
>>> On 10/25/18 9:16 AM, Koby Peleg Hen wrote:
>>>>
>>>> Hello All ,
>>>>
>>>> Since my upgrade to 5.1.2 (yesterday) my mailscanner stop
>>>> function (not scanning)
>>>>
>>>> I did not change my mailscanner.conf which run as a milter
>>>>
>>>>
>>>>
>>>> Here is the load process :
>>>>
>>>>
>>>> postfix 4628 1 0 Oct20 ? 00:00:00 MailScanner:
>>>> starting child
>>>> postfix 5740 1 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 5744 5740 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 5745 5740 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 5746 5740 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 5747 5740 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 5748 5740 0 16:10 ? 00:00:00 MSMilter Daemon
>>>> postfix 7309 2463 0 16:26 ? 00:00:00 anvil -l -t
>>>> unix -u -c
>>>> root 7784 7464 0 16:39 pts/1 00:00:00 grep
>>>> --color=auto post*
>>>> postfix 22102 4628 0 13:07 ? 00:00:34 MailScanner:
>>>> waiting for messages
>>>> postfix 28635 2463 0 13:46 ? 00:00:00 qmgr -l -t
>>>> unix -u
>>>> postfix 30060 2463 0 15:32 ? 00:00:00 pickup -l -t
>>>> unix -u -c
>>>> postfix 30150 2463 0 15:36 ? 00:00:00 tlsmgr -l -t
>>>> unix -u -c
>>>> postfix 30775 4628 0 15:41 ? 00:00:34 MailScanner:
>>>> waiting for messages
>>>>
>>>>
>>>>
>>>> It is seen that some thing went wrong
>>>>
>>>>
>>>> Any clue...
>>>>
>>>>
>>>> Koby Peleg Hen
>>>>
>>>>
>>>
>>
>>
>> --
>> MailScanner mailing list
>> mailscanner at lists.mailscanner.info
>> <mailto:mailscanner at lists.mailscanner.info>
>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>
>>
>>
>> --
>> Shawn Iverson, CETL
>> Director of Technology
>> Rush County Schools
>> 765-932-3901 option 7
>> iversons at rushville.k12.in.us <mailto:iversons at rushville.k12.in.us>
>>
>>
>>
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> <mailto:mailscanner at lists.mailscanner.info>
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>
>
> --
> Shawn Iverson, CETL
> Director of Technology
> Rush County Schools
> 765-932-3901 option 7
> iversons at rushville.k12.in.us <mailto:iversons at rushville.k12.in.us>
>
>
>
>
>
More information about the MailScanner
mailing list