Mailscanner - Spamassassin Issue

Thu Jun 7 19:24:36 UTC 2018

Hi,

So after playing with the suggestion below, and changing the command a 
little bit i now definatley have two different behaviours.

Running the commands :-
1.    spamassassin -D -t Testy.eml

consistantly gives me a full scan and result set and ends (before 
reporting the score) with :-

Jun  7 20:14:41.072 [21537] dbg: check: is spam? score=8.997 required=5
Jun  7 20:14:41.072 [21537] dbg: check: 
tests=BAYES_99,BAYES_999,DIGEST_MULTIPLE,HTML_MESSAGE,PYZOR_CHECK,RAZOR2_CF_RANGE_51_100,RAZOR2_CHECK,RDNS_NONE,T_REMOTE_IMAGE
Jun  7 20:14:41.073 [21537] dbg: check: 
subtests=__ANY_TEXT_ATTACH,__ANY_TEXT_ATTACH_DOC,__BODY_TEXT_LINE,__BODY_TEXT_LINE,__BODY_TEXT_LINE,__CAN_HELP,__CT,__CTYPE_HAS_BOUNDARY,__CTYPE_MULTIPART_ALT,__CTYPE_MULTIPART_ANY,__DKIM_DEPENDABLE,__DOS_DIRECT_TO_MX,__DOS_HAS_ANY_URI,__DOS_RCVD_MON,__DOS_SINGLE_EXT_RELAY,__HAS_ANY_URI,__HAS_DATE,__HAS_FROM,__HAS_MESSAGE_ID,__HAS_MSGID,__HAS_RCVD,__HAS_SUBJECT,__HAS_TO,__HAS_URI,__HTML_LINK_IMAGE,__KHOP_NO_FULL_NAME,__LAST_EXTERNAL_RELAY_NO_AUTH,__LAST_UNTRUSTED_RELAY_NO_AUTH,__LOCAL_PP_NONPPURL,__MIME_HTML,__MIME_VERSION,__MISSING_REF,__MISSING_REPLY,__MSGID_OK_HOST,__NONEMPTY_BODY,__RDNS_NONE,__REMOTE_IMAGE,__SANE_MSGID,__TAG_EXISTS_BODY,__TAG_EXISTS_HEAD,__TAG_EXISTS_HTML,__TAG_EXISTS_META,__TOCC_EXISTS,__TVD_MIME_ATT_TP
Jun  7 20:14:41.075 [21537] dbg: timing: total 46298 ms - init: 5474 
(11.8%), parse: 6 (0.0%), extract_message_metadata: 137 (0.3%), 
get_uri_detail_list: 27 (0.1%), tests_pri_-1000: 130 (0.3%), 
compile_gen: 713 (1.5%), compile_eval: 138 (0.3%), tests_pri_-950: 22 
(0.0%), tests_pri_-900: 24 (0.1%), tests_pri_-400: 36459 (78.7%), 
check_bayes: 36436 (78.7%), b_tokenize: 29 (0.1%), b_tok_get_all: 11 
(0.0%), b_comp_prob: 9 (0.0%), b_tok_touch_all: 0.51 (0.0%), b_finish: 
36381 (78.6%), expire_bayes: 36225 (78.2%), tests_pri_0: 3647 (7.9%), 
check_spf: 161 (0.3%), dkim_load_modules: 106 (0.2%), 
check_dkim_signature: 2.5 (0.0%), check_dkim_adsp: 126 (0.3%), 
poll_dns_idle: 0.80 (0.0%), check_razor2: 1416 (3.1%), check_pyzor: 284 
(0.6%), tests_pri_500: 331 (0.7%)

Running the commands
1.    sudo su postfix -p -c "spamassassin -D -t -C 
/etc/MailScanner/spamassassin.conf < Testy.eml"  - in the dbg statements 
for this command, there are some warnings about permission
2.    sudo -u postfix spamassassin -D -t -C 
/etc/MailScanner/spamassassin.conf Testy.eml
3.    spamassassin -D -t -C /etc/MailScanner/spamassassin.conf Testy.eml
Seems to start spamassassin, but it finishes way way sooner than the 
successful command, it stops very early on in the dbg, and gives a 
message saying "(no Report template found)

the above 3 commands all end up with
Jun  7 20:23:20.745 [21665] dbg: check: is spam? score=0 required=5
Jun  7 20:23:20.746 [21665] dbg: check: tests=
Jun  7 20:23:20.746 [21665] dbg: check: subtests=
Jun  7 20:23:20.747 [21665] dbg: timing: total 796 ms - init: 696 
(87.5%), parse: 6 (0.7%), extract_message_metadata: 62 (7.8%), 
get_uri_detail_list: 24 (3.0%), tests_pri_0: 21 (2.6%), compile_gen: 4.3 
(0.5%)

There are plenty of other difference betweent the two reports.

Still very little idea of what i am doing with this, so help is still 
very much appreciated!

regards

Toby

------ Original Message ------
From: "Toby Widdows" <toby at rosecott.net>
To: "MailScanner Discussion" <mailscanner at lists.mailscanner.info>
Sent: 06/06/2018 23:15:04
Subject: Re: Mailscanner - Spamassassin Issue

>Ahh never thought of that, will give it a try
>
>Regards
>
>
>Toby Widdows
>
>
>
>On Wed, Jun 6, 2018 at 11:14 PM +0100, "Shawn Iverson" 
><iversons at rushville.k12.in.us> wrote:
>
>>Toby,
>>
>>Are you executing spamassassin in the same way that MailScanner calls 
>>spamassassin?
>>
>>In other words...assuming MailScanner is running as 
>>postfix...something like this....
>>
>>sudo su postfix -p -c "spamassassin -t -d -C 
>>/etc/MailScanner/spamassassin.conf < somespamemail"
>>
>>This may shed some insight.
>>
>>On Wed, Jun 6, 2018 at 2:47 PM, Toby <toby at rosecott.net> wrote:
>>>Hi,
>>>
>>>I have just set up MailScanner in a PI3 running Jessie, I have 
>>>postfix as a mail server.
>>>
>>>I'm not sure MailScanner is calling or allowing Spamassassin to run 
>>>properly.
>>>
>>>I can see from the X headers that stuff is happening, but it is not 
>>>catching emails that are blatantly spam.  i get a lot of scores below 
>>>3.
>>>
>>>It passes the eicar, and gtube tests.
>>>
>>>However i picked an email that passed through mailscanner with a low 
>>>score of 3, saved it, and then ran spamassassin -D <filename>  and 
>>>this process marked it as a 9!
>>>
>>>I think, but am not sure, that MailScanner is not triggering 
>>>Spamassassin or Spamassassin when triggered by MailScanner is either 
>>>not completing or not doing anything.
>>>
>>>I am completely new to this, and have no idea where to look, or what 
>>>to do.
>>>
>>>Any help greatly appreciated
>>>
>>>Regards
>>>
>>>Toby
>>>
>>>
>>>
>>>--
>>>MailScanner mailing list
>>>mailscanner at lists.mailscanner.info 
>>><mailto:mailscanner at lists.mailscanner.info>
>>>http://lists.mailscanner.info/mailman/listinfo/mailscanner 
>>><http://lists.mailscanner.info/mailman/listinfo/mailscanner>
>>>
>>>
>>
>>
>>
>>--
>>Shawn Iverson, CETL
>>Director of Technology
>>Rush County Schools
>>765-932-3901 x1171
>>iversons at rushville.k12.in.us
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20180607/0e50be10/attachment.html>