SpamAssassin installation failure
Shawn Iverson
iversons at rushville.k12.in.us
Fri Dec 15 22:29:43 UTC 2017
t/sa_check_spamd.t ................ ok
# Failed test 1 in t/sa_compile.t at line 149
Not found: FOO = check: tests=FOO at t/sa_compile.t line 150.
# Failed test 2 in t/SATest.pm at line 755
'/root/.cpan/build/Mail-SpamAssassin-3.4.1-mWwPC3/t/log/d.sa_compile/inst.basic/
foo//local/bin/sa-compile --keep-tmps' failed: DIED, signal 127
(fffffffffffffff
f) at t/SATest.pm line 991.
t/sa_compile.t ....................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 5/5 subtests
t/sha1.t .......................... ok
On Fri, Dec 15, 2017 at 4:37 PM, Eoin Kim <Eoin.Kim at rcst.com.au> wrote:
> Hi Shawn,
>
> What about the log message? Did it show the same as my case even though the installation was okay with flags? Cheers.
>
> Eoin
>
> Shawn Iverson <iversons at rushville.k12.in.us> wrote:
>
>
> Despite that, I am going to add --force to cpanm in install.sh, just to
> improve the chances of a successful install.
>
> On Fri, Dec 15, 2017 at 4:32 PM, Shawn Iverson <
> iversons at rushville.k12.in.us> wrote:
>
>> Follow up on this...
>>
>> I installed on Debian 8 and MailScanner with and without the flags and
>> spamassassin installed successfully.
>>
>> I did get the two dubious test failures each way, but spamassassin
>> successfully compiled and installed.
>>
>> My MailScanner --lint test shows good.
>>
>> SpamAssassin reported no errors.
>>
>>
>> On Thu, Dec 14, 2017 at 2:06 PM, Shawn Iverson <
>> iversons at rushville.k12.in.us> wrote:
>>
>>> Not yet, I am going to look into it more this evening. I am thinking
>>> cpanm not doing a force may be the culprit as you suggest. It is only
>>> called when using the flags to automate cpan perl module compilation. SA
>>> tests can fail for stupid reasons that won't actually affect the
>>> installation.
>>>
>>> On Wed, Dec 13, 2017 at 9:01 PM, Eoin Kim <Eoin.Kim at rcst.com.au> wrote:
>>>
>>>> Hi Shawn,
>>>>
>>>>
>>>>
>>>> Just wonder if you require further information regarding this. Thanks.
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* Eoin Kim
>>>> *Sent:* Thursday, 14 December 2017 7:32 AM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* RE: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Hi Shawn,
>>>>
>>>>
>>>>
>>>> The installation without flags looks different but I am not sure if
>>>> this is successful or not. I’ll attach the installation log file. Thanks.
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* MailScanner [mailto:mailscanner-bounces+eo
>>>> in.kim=rcst.com.au at lists.mailscanner.info
>>>> <mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info>] *On
>>>> Behalf Of *Shawn Iverson
>>>> *Sent:* Wednesday, 13 December 2017 10:05 PM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* Re: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Eoin,
>>>>
>>>>
>>>>
>>>> If you install without using the flags for install.sh and answer the
>>>> prompts, does spamassassin install successfully?
>>>>
>>>>
>>>>
>>>> On Tue, Dec 12, 2017 at 8:12 PM, Eoin Kim <Eoin.Kim at rcst.com.au> wrote:
>>>>
>>>> Hi Shawn,
>>>>
>>>>
>>>>
>>>> I checked the install.sh script and it looks like --force options is
>>>> missing.
>>>>
>>>>
>>>>
>>>> #Install SpamaAssassin, use standard cpan in normail install, or
>>>> App::cpanminus in unattended install
>>>>
>>>> perldoc -l ${MODSA} >/dev/null 2>&1
>>>>
>>>> if [ $? != 0 ]; then
>>>>
>>>> clear
>>>>
>>>> echo "${MODSA} is missing. Installing via CPAN ..."; echo;
>>>>
>>>> timewait 1
>>>>
>>>> if [ $AUTOCPAN -eq 0 ]; then
>>>>
>>>> perl -MCPAN -e "CPAN::Shell->force(qw(install ${MODSA} ));"
>>>>
>>>> else
>>>>
>>>> cpanm --no-interactive ${MODSA}
>>>>
>>>> fi
>>>>
>>>> fi
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* MailScanner [mailto:mailscanner-bounces+eoin.kim=
>>>> rcst.com.au at lists.mailscanner.info] *On Behalf Of *Eoin Kim
>>>> *Sent:* Wednesday, 13 December 2017 9:09 AM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* RE: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Hi Shawn,
>>>>
>>>>
>>>>
>>>> My apologies for messy emails but I’d like to make things clear. So,
>>>> here’s what I did step by step:
>>>>
>>>> 1. Installed Debian Jessie and upgraded (sudo apt-get update &&
>>>> sudo apt-get upgrade && sudo reboot).
>>>> 2. Installed few packages: ca-certificates, libgeo-ip-perl,
>>>> libnet-patricia-perl
>>>> 3. Downloaded the MailScanner installer.
>>>> 4. Ran the command - ./install.sh --MTA=postfix --installClamav=Y
>>>> --installCPAN=Y --ignoreDeps=N --ramdiskSize=0
>>>>
>>>>
>>>>
>>>> During the procedure, I watched the log and this showed up.
>>>>
>>>>
>>>>
>>>> --> Working on Digest::SHA1
>>>>
>>>> Fetching http://www.cpan.org/authors/id/G/GA/GAAS/Digest-SHA1-2.13.ta
>>>> r.gz ... OK
>>>>
>>>> Configuring Digest-SHA1-2.13 ... OK
>>>>
>>>> Building and testing Digest-SHA1-2.13 ... OK
>>>>
>>>> Successfully installed Digest-SHA1-2.13
>>>>
>>>> 1 distribution installed
>>>>
>>>> Mail::SpamAssassin is missing. Installing via CPAN ...
>>>>
>>>>
>>>>
>>>> --> Working on Mail::SpamAssassin
>>>>
>>>> Fetching http://www.cpan.org/authors/id/K/KM/KMCGRAIL/SpamAssassin/Ma
>>>> il-SpamAssassin-3.4.1.tar.gz ... OK
>>>>
>>>> Configuring Mail-SpamAssassin-3.004001 ... OK
>>>>
>>>> Building and testing Mail-SpamAssassin-3.004001 ... ! Installing
>>>> Mail::SpamAssassin failed. See /root/.cpanm/work/1513044980.46831/build.log
>>>> for details. Retry with --force to force install it.
>>>>
>>>> FAIL
>>>>
>>>>
>>>>
>>>> It kept going and installation finished. And when I looked the
>>>> /root/.cpanm/work/1513044980.46831/build.log file, at the end this
>>>> shows.
>>>>
>>>>
>>>>
>>>> Test Summary Report
>>>>
>>>> -------------------
>>>>
>>>> t/sa_compile.t (Wstat: 512 Tests: 2 Failed: 2)
>>>>
>>>> Failed tests: 1-2
>>>>
>>>> Non-zero exit status: 2
>>>>
>>>> Parse errors: Bad plan. You planned 5 tests but ran 2.
>>>>
>>>> Files=168, Tests=3014, 333 wallclock secs ( 0.69 usr 0.09 sys + 67.79
>>>> cusr 5.12 csys = 73.69 CPU)
>>>>
>>>> Result: FAIL
>>>>
>>>> Failed 1/168 test programs. 2/3014 subtests failed.
>>>>
>>>> Makefile:1582: recipe for target 'test_dynamic' failed
>>>>
>>>> make: *** [test_dynamic] Error 255
>>>>
>>>> -> FAIL Installing Mail::SpamAssassin failed. See
>>>> /root/.cpanm/work/1513044980.46831/build.log for details. Retry with
>>>> --force to force install it.
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* MailScanner [mailto:mailscanner-bounces+eo
>>>> in.kim=rcst.com.au at lists.mailscanner.info
>>>> <mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info>] *On
>>>> Behalf Of *Eoin Kim
>>>> *Sent:* Wednesday, 13 December 2017 8:23 AM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* RE: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Sorry for flying emails but I used this file -
>>>> https://s3.amazonaws.com/msv5/release/MailScanner-5.0.6-5.deb.tar.gz
>>>>
>>>>
>>>>
>>>> I didn’t clone Github. Thanks.
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* MailScanner [mailto:mailscanner-bounces+eo
>>>> in.kim=rcst.com.au at lists.mailscanner.info
>>>> <mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info>] *On
>>>> Behalf Of *Eoin Kim
>>>> *Sent:* Wednesday, 13 December 2017 8:18 AM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* RE: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Thanks Shawn,
>>>>
>>>>
>>>>
>>>> I am using the latest kernel for your information (I did sudo apt-get
>>>> update && sudo apt-get upgrade && sudo reboot).
>>>>
>>>>
>>>>
>>>> sysadmin at mx1.bne.lab.boof.com:/usr/local/src/MailScanner-5.0.6-5$
>>>> uname -a
>>>>
>>>> Linux mx1.bne.lab.boof.com 3.16.0-4-amd64 #1 SMP Debian 3.16.51-2
>>>> (2017-12-03) x86_64 GNU/Linux
>>>>
>>>>
>>>>
>>>> Thanks again.
>>>>
>>>>
>>>>
>>>> Eoin
>>>>
>>>>
>>>>
>>>> *From:* MailScanner [mailto:mailscanner-bounces+eo
>>>> in.kim=rcst.com.au at lists.mailscanner.info
>>>> <mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info>] *On
>>>> Behalf Of *Shawn Iverson
>>>> *Sent:* Wednesday, 13 December 2017 8:15 AM
>>>> *To:* MailScanner Discussion <mailscanner at lists.mailscanner.info>
>>>> *Subject:* Re: SpamAssassin installation failure
>>>>
>>>>
>>>>
>>>> Eoin,
>>>>
>>>>
>>>>
>>>> I am spinning up a Jessie instance to see if i can reproduce the issue.
>>>>
>>>>
>>>>
>>>> On Tue, Dec 12, 2017 at 5:01 PM, Eoin Kim <Eoin.Kim at rcst.com.au> wrote:
>>>>
>>>> Hi all,
>>>>
>>>>
>>>>
>>>> I am trying to install MailScanner (v.5.0.6-5) on my Debian Jessie and
>>>> it looks like installing SpamAssassin is failed. Below is the end of log
>>>> message.
>>>>
>>>>
>>>>
>>>> Test Summary Report
>>>>
>>>> -------------------
>>>>
>>>> t/sa_compile.t (Wstat: 512 Tests: 2 Failed: 2)
>>>>
>>>> Failed tests: 1-2
>>>>
>>>> Non-zero exit status: 2
>>>>
>>>> Parse errors: Bad plan. You planned 5 tests but ran 2.
>>>>
>>>> Files=168, Tests=3014, 333 wallclock secs ( 0.69 usr 0.09 sys + 67.79
>>>> cusr 5.12 csys = 73.69 CPU)
>>>>
>>>> Result: FAIL
>>>>
>>>> Failed 1/168 test programs. 2/3014 subtests failed.
>>>>
>>>> Makefile:1582: recipe for target 'test_dynamic' failed
>>>>
>>>> make: *** [test_dynamic] Error 255
>>>>
>>>> -> FAIL Installing Mail::SpamAssassin failed. See
>>>> /root/.cpanm/work/1513044980.46831/build.log for details. Retry with
>>>> --force to force install it.
>>>>
>>>>
>>>>
>>>> I used this command - ./install.sh --MTA=postfix --installClamav=Y
>>>> --installCPAN=Y --ignoreDeps=N --ramdiskSize=0
>>>>
>>>>
>>>>
>>>> What is the possible cause of this error and how can I rectify this?
>>>> Thanks a lot.
>>>>
>>>>
>>>>
>>>> *Eoin Kim*
>>>>
>>>> Systems Administrator
>>>>
>>>>
>>>>
>>>> *RCS Telecommunications *
>>>>
>>>> Level 1 – The Annexe
>>>>
>>>> 133 Mary Street
>>>>
>>>> Brisbane, QLD, 4000
>>>>
>>>> Office: 07 3228 0843
>>>>
>>>> Mobile: 0419 726 231
>>>>
>>>>
>>>>
>>>> [image: RCST logo drop shadow]
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> MailScanner mailing list
>>>> mailscanner at lists.mailscanner.info
>>>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Shawn Iverson, CETL
>>>>
>>>> Director of Technology
>>>>
>>>> Rush County Schools
>>>>
>>>> 765-932-3901 x1171 <(765)%20932-3901>
>>>>
>>>> iversons at rushville.k12.in.us
>>>>
>>>>
>>>>
>>>> [image: Image removed by sender.][image: Image removed by sender.]
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> MailScanner mailing list
>>>> mailscanner at lists.mailscanner.info
>>>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Shawn Iverson, CETL
>>>>
>>>> Director of Technology
>>>>
>>>> Rush County Schools
>>>>
>>>> 765-932-3901 x1171 <(765)%20932-3901>
>>>>
>>>> iversons at rushville.k12.in.us
>>>>
>>>>
>>>>
>>>> [image: Image removed by sender.][image: Image removed by sender.]
>>>>
>>>>
>>>>
>>>> --
>>>> MailScanner mailing list
>>>> mailscanner at lists.mailscanner.info
>>>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Shawn Iverson, CETL
>>> Director of Technology
>>> Rush County Schools
>>> 765-932-3901 x1171 <(765)%20932-3901>
>>> iversons at rushville.k12.in.us
>>>
>>>
>>>
>>
>>
>> --
>> Shawn Iverson, CETL
>> Director of Technology
>> Rush County Schools
>> 765-932-3901 x1171 <(765)%20932-3901>
>> iversons at rushville.k12.in.us
>>
>>
>>
>
>
> --
> Shawn Iverson, CETL
> Director of Technology
> Rush County Schools
> 765-932-3901 x1171 <(765)%20932-3901>
> iversons at rushville.k12.in.us
>
>
>
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>
>
--
Shawn Iverson, CETL
Director of Technology
Rush County Schools
765-932-3901 x1171
iversons at rushville.k12.in.us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20171215/397d38a0/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20171215/397d38a0/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3384 bytes
Desc: not available
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20171215/397d38a0/attachment-0003.jpg>
More information about the MailScanner
mailing list