MCP checks

[Jerry Benton]

I see it being called and run, it just is not triggering.


-
Jerry Benton
www.mailborder.com
+1 - 844-436-6245


-----Original Message-----
From: Shawn Iverson <iversons at rushville.k12.in.us>
Reply: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Date: September 19, 2016 at 6:07:00 PM
To: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Subject:  Re: MCP checks

> I do not see MCP being called. I should at least see the following in the
> maillog:
>
> MCP Checks: Starting
>
> On Mon, Sep 19, 2016 at 5:53 PM, Shawn Iverson > > wrote:
>
> > Confirmed issue with MCP.
> >
> > I cannot get MCP to fire either.
> >
> > On Mon, Sep 19, 2016 at 4:56 PM, Jerry Benton > > > wrote:
> >
> >> Yes. The latest.
> >>
> >>
> >> -
> >> Jerry Benton
> >> www.mailborder.com
> >> +1 - 844-436-6245
> >>
> >>
> >> -----Original Message-----
> >> From: Shawn Iverson
> >> Reply: MailScanner Discussion
> >> Date: September 19, 2016 at 4:56:27 PM
> >> To: MailScanner Discussion
> >> Subject: Re: MCP checks
> >>
> >> > I'll runs some tests. 5.0.3-7, right?
> >> >
> >> > On Mon, Sep 19, 2016 at 4:47 PM, Jerry Benton
> >> > wrote:
> >> >
> >> > > Similar settings on my lab server. Not working =/
> >> > >
> >> > > This sucks.
> >> > >
> >> > >
> >> > > -
> >> > > Jerry Benton
> >> > > www.mailborder.com
> >> > > +1 - 844-436-6245
> >> > >
> >> > >
> >> > > -----Original Message-----
> >> > > From: Peter H. Lemieux
> >> > > Reply: MailScanner Discussion
> >> > > Date: September 19, 2016 at 4:38:16 PM
> >> > > To: MailScanner Discussion
> >> > > Subject: Re: MCP checks
> >> > >
> >> > > > # this contains the usual list of addresses to check or not to check
> >> > > > MCP Checks = /etc/MailScanner/rules/mcp_checks.rules
> >> > > >
> >> > > > First Check = MCP
> >> > > >
> >> > > > MCP Required SpamAssassin Score = 5
> >> > > > MCP High SpamAssassin Score = 9
> >> > > > MCP Error Score = 1
> >> > > >
> >> > > > # we use "PHI" for "patient health information"
> >> > > > MCP Header = X-XXCHC-PHI-Monitor:
> >> > > > Non MCP Actions = deliver
> >> > > >
> >> > > > MCP Actions = store-nonmcp
> >> > > > High Scoring MCP Actions = store-mcp
> >> > > > Bounce MCP As Attachment = no
> >> > > >
> >> > > > MCP Modify Subject = no
> >> > > > MCP Subject Text =
> >> > > > High Scoring MCP Modify Subject = no
> >> > > > High Scoring MCP Subject Text = {PHI}
> >> > > >
> >> > > > Is Definitely MCP = no
> >> > > > Is Definitely Not MCP = no
> >> > > > Definite MCP Is High Scoring = no
> >> > > > Always Include MCP Report = yes
> >> > > > Detailed MCP Report = yes
> >> > > > Include Scores In MCP Report = yes
> >> > > >
> >> > > > In /etc/MailScanner/mcp I have rulesets like this one:
> >> > > >
> >> > > > File: /etc/MailScanner/mcp/20_Numbers_and_Codes.cf
> >> > > >
> >> > > > ### Patient Identification Codes
> >> > > >
> >> > > > header SUBJ_XXID1 Subject =~ /\b005[4-8]\d{4}\b/
> >> > > > describe SUBJ_XXID1 XXCHC Patient ID with 0054-8 in Subject Header
> >> > > > score SUBJ_XXID1 10
> >> > > >
> >> > > > header SUBJ_XXID2 Subject =~ /\b1005[89]\d+\b/
> >> > > > describe SUBJ_XXID2 XXCHC Patient ID with 10058-9 in Subject Header
> >> > > > score SUBJ_XXID2 10
> >> > > >
> >> > > > header SUBJ_XXID3 Subject =~ /\b1006[0123]\d+\b/
> >> > > > describe SUBJ_XXID3 XXCHC Patient ID with 10060-63 in Subject Header
> >> > > > score SUBJ_XXID3 10
> >> > > >
> >> > > > header SUBJ_XXID4 Subject =~ /\b00000\d{3}\b/
> >> > > > describe SUBJ_XXID4 Possible XXCHC Patient ID in Subject Header
> >> > > > score SUBJ_XXID4 5
> >> > > >
> >> > > > # They use some pretty generic patient IDs like 00001234.
> >> > > > header SUBJ_XXID5 Subject =~ /\b0000\d{4}\b/
> >> > > > describe SUBJ_XXID5 Possible XXCHC Patient ID in Subject Header
> >> > > > score SUBJ_XXID5 5
> >> > > >
> >> > > > header SUBJ_SSN1 Subject =~ /\b\d{3}-\d{2}-\d{4}\b/
> >> > > > describe SUBJ_SSN1 Likely Social Security Number in Subject Header
> >> > > > score SUBJ_SSN1 10
> >> > > >
> >> > > > [etc.]
> >> > > >
> >> > > > A score of ten results in the message being quarantined and a notice
> >> > > > sent to the administrator and the message sender. A score of five
> >> sends
> >> > > > notices but permits the message to be sent to its recipient.
> >> > > >
> >> > > > Hope this helps, Jerry!
> >> > > >
> >> > > > Peter
> >> > > >
> >> > > >
> >> > > >
> >> > > > On 09/19/2016 03:21 PM, Jerry Benton wrote:
> >> > > > > What do your settings look like?
> >> > > > >
> >> > > > >
> >> > > > > -
> >> > > > > Jerry Benton
> >> > > > > www.mailborder.com
> >> > > > > +1 - 844-436-6245
> >> > > > >
> >> > > > >
> >> > > > > -----Original Message-----
> >> > > > > From: Peter H. Lemieux
> >> > > > > Reply: MailScanner Discussion
> >> > > > > Date: September 19, 2016 at 3:18:27 PM
> >> > > > > To: MailScanner Discussion
> >> > > > > Subject: Re: MCP checks
> >> > > > >
> >> > > > >> I do, but I'm using 4.85,2. We use MCP at a health center to
> >> intercept
> >> > > > >> outbound messages that may contain "patient health information"
> >> as
> >> > > > >> defined by the US HIPAA laws. Works as advertised.
> >> > > > >>
> >> > > > >> I haven't tried version 5 yet so I can't help with that.
> >> > > > >>
> >> > > > >> Peter
> >> > > > >>
> >> > > > >>
> >> > > > >> On 09/19/2016 02:51 PM, Jerry Benton wrote:
> >> > > > >>> Anyone using MCP? I can’t seem to get it to fire on any rules,
> >> but
> >> > > the
> >> > > > >>> same rules will fire in regular spamassassin checks.
> >> > > > >>>
> >> > > > >>>
> >> > > > >>> -
> >> > > > >>> Jerry Benton
> >> > > > >>> www.mailborder.com
> >> > > > >>> +1 - 844-436-6245
> >> > > > >>>
> >> > > > >>>
> >> > > > >>
> >> > > > >>
> >> > > > >> --
> >> > > > >> MailScanner mailing list
> >> > > > >> mailscanner at lists.mailscanner.info
> >> > > > >> http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >> > > > >>
> >> > > > >>
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > > > --
> >> > > > MailScanner mailing list
> >> > > > mailscanner at lists.mailscanner.info
> >> > > > http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> > > --
> >> > > MailScanner mailing list
> >> > > mailscanner at lists.mailscanner.info
> >> > > http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >> > >
> >> > >
> >> >
> >> >
> >> > --
> >> > Shawn Iverson
> >> > Director of Technology
> >> > Rush County Schools
> >> > 765-932-3901 x271
> >> > iversons at rushville.k12.in.us
> >> >
> >> >
> >> > --
> >> > MailScanner mailing list
> >> > mailscanner at lists.mailscanner.info
> >> > http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >> >
> >> >
> >>
> >>
> >> --
> >> MailScanner mailing list
> >> mailscanner at lists.mailscanner.info
> >> http://lists.mailscanner.info/mailman/listinfo/mailscanner
> >>
> >>
> >
> >
> > --
> > Shawn Iverson
> > Director of Technology
> > Rush County Schools
> > 765-932-3901 x271
> > iversons at rushville.k12.in.us
> >
> >
> >
>
>
> --
> Shawn Iverson
> Director of Technology
> Rush County Schools
> 765-932-3901 x271
> iversons at rushville.k12.in.us
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
>