Problems after upgrade from 4.85 to 5.03

Thom van der Boon thom at vdb.nl
Tue Oct 11 14:59:23 UTC 2016


HI Daniel, 

Did you notice that the major change between 4.8.x and 5.0.x is that the MTA is not started bij MailScanner anymore but you have to start it your self 


:) 



Met vriendelijke groet, Best regards, 


Thom van der Boon 
E-Mail: thom at vdb.nl 



===== 



Thom.H. van der Boon b.v. 
Transito 4 
6909 DA Babberich 
Tel.: +31 (0)88 4272727 
Fax: +31 (0)88 4272789 
Home Page: http://www.vdb.nl/ 


Van: "Daniel Malmgren" <daniel at kolefors.se> 
Aan: mailscanner at lists.mailscanner.info 
Verzonden: Dinsdag 11 oktober 2016 10:12:16 
Onderwerp: Problems after upgrade from 4.85 to 5.03 

Hi 
I've upgraded from mailscanner 4.85 to 5.03 and I think I need some help 
with getting things going after the upgrade. I'm running postfix so I 
have got things set up as per instruktions on 
https://www.mailscanner.info/postfix/. After the upgrade I got 
permissions problems, so now I've changed "Run As Group" to mtagroup and 
"Incoming Work Permissions" to 0660 which made all errors go away and a 
check with --lint returns all fine. Now it seems though that MailScanner 
processes the same messages again and again, like it's stuck in a loop, 
see log snippet below. The messages seem to stay in postfix's hold queue. 

Oct 11 09:29:39 cube MailScanner[10550]: MailScanner Email Processor 
version 5.0.3 starting... 
Oct 11 09:29:39 cube MailScanner[10550]: Reading configuration file 
/etc/MailScanner/MailScanner.conf 
Oct 11 09:29:39 cube MailScanner[10550]: Reading configuration file 
/etc/MailScanner/conf.d/README 
Oct 11 09:29:40 cube MailScanner[10550]: Read 501 hostnames from the 
phishing whitelist 
Oct 11 09:29:40 cube MailScanner[10550]: Read 19224 hostnames from the 
phishing blacklists 
Oct 11 09:29:40 cube MailScanner[10550]: Config: calling custom init 
function SQLBlacklist 
Oct 11 09:29:40 cube MailScanner[10550]: Config: calling custom init 
function SQLWhitelist 
Oct 11 09:29:40 cube MailScanner[10550]: Config: calling custom init 
function MailWatchLogging 
Oct 11 09:29:41 cube MailScanner[10550]: Using SpamAssassin results cache 
Oct 11 09:29:41 cube MailScanner[10550]: Connected to SpamAssassin cache 
database 
Oct 11 09:29:41 cube MailScanner[10550]: Enabling SpamAssassin 
auto-whitelist functionality... 
Oct 11 09:29:48 cube MailScanner[10538]: Connected to Processing 
Attempts Database 
Oct 11 09:29:48 cube MailScanner[10538]: Found 2 messages in the 
Processing Attempts Database 
Oct 11 09:29:48 cube MailScanner[10538]: Using locktype = flock 
Oct 11 09:29:48 cube MailScanner[10538]: Making attempt 4 at processing 
message 9CC2E45321.A7F02 
Oct 11 09:29:48 cube MailScanner[10538]: New Batch: Scanning 1 messages, 
14245 bytes 
Oct 11 09:29:49 cube MailScanner[10538]: Virus and Content Scanning: 
Starting 
Oct 11 09:29:52 cube MailScanner[10550]: Connected to Processing 
Attempts Database 
Oct 11 09:29:52 cube MailScanner[10550]: Found 2 messages in the 
Processing Attempts Database 
Oct 11 09:29:52 cube MailScanner[10550]: Using locktype = flock 
Oct 11 09:30:41 cube MailScanner[10632]: MailScanner Email Processor 
version 5.0.3 starting... 
Oct 11 09:30:41 cube MailScanner[10632]: Reading configuration file 
/etc/MailScanner/MailScanner.conf 
Oct 11 09:30:41 cube MailScanner[10632]: Reading configuration file 
/etc/MailScanner/conf.d/README 
Oct 11 09:30:41 cube MailScanner[10632]: Read 501 hostnames from the 
phishing whitelist 
Oct 11 09:30:42 cube MailScanner[10632]: Read 19224 hostnames from the 
phishing blacklists 
Oct 11 09:30:42 cube MailScanner[10632]: Config: calling custom init 
function SQLWhitelist 
Oct 11 09:30:42 cube MailScanner[10632]: Config: calling custom init 
function MailWatchLogging 
Oct 11 09:30:42 cube MailScanner[10632]: Config: calling custom init 
function SQLBlacklist 
Oct 11 09:30:43 cube MailScanner[10632]: Using SpamAssassin results cache 
Oct 11 09:30:43 cube MailScanner[10632]: Connected to SpamAssassin cache 
database 
Oct 11 09:30:43 cube MailScanner[10632]: Enabling SpamAssassin 
auto-whitelist functionality... 
Oct 11 09:30:54 cube MailScanner[10632]: Connected to Processing 
Attempts Database 
Oct 11 09:30:54 cube MailScanner[10632]: Found 2 messages in the 
Processing Attempts Database 
Oct 11 09:30:54 cube MailScanner[10632]: Using locktype = flock 
Oct 11 09:33:09 cube MailScanner[10550]: Making attempt 5 at processing 
message 9CC2E45321.A7F02 
Oct 11 09:33:09 cube MailScanner[10550]: New Batch: Scanning 1 messages, 
14245 bytes 
Oct 11 09:33:09 cube MailScanner[10550]: Virus and Content Scanning: 
Starting 

Since I don't get any errors I don't really where to continue looking. 
Anyone see anything obvious? 

I'm using MailWatch, Debian 8.6 and postfix 2.11.3. 

/Daniel 


-- 
MailScanner mailing list 
mailscanner at lists.mailscanner.info 
http://lists.mailscanner.info/mailman/listinfo/mailscanner 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mailscanner.info/pipermail/mailscanner/attachments/20161011/b027ad79/attachment.html>


More information about the MailScanner mailing list