MailScanner --lint %org-name% not importing

Eoin Kim Eoin.Kim at rcst.com.au
Sun Jul 24 23:33:31 UTC 2016


Because I wanted MailScanner to read .conf file only. I reverted it and tested it, the result is the same anyway.

Eoin

-----Original Message-----
From: MailScanner [mailto:mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info] On Behalf Of Jerry Benton
Sent: Monday, 25 July 2016 9:31 AM
To: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Subject: RE: MailScanner --lint %org-name% not importing

Why would you change it?


-
Jerry Benton
www.mailborder.com
+1 - 844-436-6245


-----Original Message-----
From: Eoin Kim <eoin.kim at rcst.com.au>
Reply: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Date: July 24, 2016 at 7:29:55 PM
To: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Subject:  RE: MailScanner --lint %org-name% not importing

> Yes, I do have except I changed it like this: include /etc/MailScanner/conf.d/*.conf.
> Does this make a problem? I'll test it now. Thanks.
>
> Eoin
>
> -----Original Message-----
> From: MailScanner 
> [mailto:mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.inf
> o]
> On Behalf Of Jerry Benton
> Sent: Monday, 25 July 2016 9:27 AM
> To: MailScanner Discussion
> Subject: RE: MailScanner --lint %org-name% not importing
>
> This should be at the end of /etc/MailScanner/MailScanner.conf
>
>
> #
> #
> # Include conf.d files automatically, so you can override any of the # 
> items set above with settings in your own local configuration files.
> # They will be read and processed in alphabetical order.
> #
> #
> include /etc/MailScanner/conf.d/*
>
> # End Of File
>
>
>
>
> -
> Jerry Benton
> www.mailborder.com
> +1 - 844-436-6245
>
>
> -----Original Message-----
> From: Eoin Kim
> Reply: MailScanner Discussion
> Date: July 24, 2016 at 7:24:52 PM
> To: MailScanner Discussion
> Subject: RE: MailScanner --lint %org-name% not importing
>
> > Jerry,
> >
> > So, I have a file /etc/MailScanner/conf.d/mynetwork.conf and inside 
> > that file %org-name% = mynetwork. And I changed 
> > /etc/MailScanner/spamassassin.conf
> file like below:
> >
> > envelope_sender_header X-mynetwork-MailScanner-From
> >
> > And I also have a file /etc/MailScanner/MailScanner.conf which has 
> > this setting by default %org-name% = yoursite.
> >
> > Now, when I run 'MailScanner --lint' this happens:
> >
> > Checking version numbers...
> > Version number in MailScanner.conf (5.0.2) is correct.
> >
> > ERROR: The "envelope_sender_header" in your spamassassin.conf
> > ERROR: is not correct, it should match X-yoursite-MailScanner-From
> >
> > MailScanner setting GID to (1001)
> > MailScanner setting UID to (106)
> >
> > [ ... ]
> >
> > If I am right, I already did what you said. But no hope. Am I missing something?
> >
> > Eoin
> >
> > -----Original Message-----
> > From: MailScanner
> > [mailto:mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.i
> > nf
> > o]
> > On Behalf Of Jerry Benton
> > Sent: Monday, 25 July 2016 9:19 AM
> > To: MailScanner Discussion
> > Subject: RE: MailScanner --lint %org-name% not importing
> >
> > Edit /etc/MailScanner/spamassassin.conf
> >
> > find: envelope_sender_header
> >
> > Change it to match what the MailScanner --lint is telling you to change it to.
> >
> >
> > -
> > Jerry Benton
> > www.mailborder.com
> > +1 - 844-436-6245
> >
> >
> > -----Original Message-----
> > From: Eoin Kim
> > Reply: MailScanner Discussion
> > Date: July 24, 2016 at 7:17:25 PM
> > To: MailScanner Discussion
> > Subject: RE: MailScanner --lint %org-name% not importing
> >
> > > Hello Jerry,
> > >
> > > Sorry but I don't understand what you said. Such a tiny 
> > > information to me. I have spamassassin.conf file in 
> > > /etc/MailScanner directory which is linked to 
> > > /etc/spamassassin/MailScanner.cf file. So, if I change 
> > > spamassassin.conf
> > file, it should just work, correct?
> > >
> > > Eoin
> > >
> > > -----Original Message-----
> > > From: MailScanner
> > > [mailto:mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner
> > > .i
> > > nf
> > > o]
> > > On Behalf Of Jerry Benton
> > > Sent: Monday, 25 July 2016 9:14 AM
> > > To: MailScanner Discussion
> > > Subject: Re: MailScanner --lint %org-name% not importing
> > >
> > > The files in /conf.d have no impact on spamassassin.conf. You need to edit that file.
> > >
> > >
> > > -
> > > Jerry Benton
> > > www.mailborder.com
> > > +1 - 844-436-6245
> > >
> > >
> > > -----Original Message-----
> > > From: Eoin Kim
> > > Reply: MailScanner Discussion
> > > Date: July 24, 2016 at 7:10:54 PM
> > > To: mailscanner at lists.mailscanner.info
> > > Subject: MailScanner --lint %org-name% not importing
> > >
> > > > Hi,
> > > >
> > > > I am not sure if it is the desired behaviour but my MailScanner 
> > > > doesn't import my configuration setting.
> > > >
> > > > I made site-specific configuration file inside 
> > > > /etc/MailScanner/conf.d directory and inside that file I set 
> > > > %org-name%. However, when I run MailScanner --lint, I get this
> > > > error:
> > > >
> > > > ***************************************************************
> > > > sysadmin at mail1.mynetwork.lab.int:~$ sudo MailScanner --lint 
> > > > Trying to
> > > > setlogsock(unix)
> > > >
> > > > Reading configuration file /etc/MailScanner/MailScanner.conf 
> > > > Reading configuration file 
> > > > /etc/MailScanner/conf.d/mynetwork.conf
> > > > Read 501 hostnames from the phishing whitelist Read 15359 
> > > > hostnames from the phishing blacklists
> > > > Config: calling custom init function SQLWhitelist Starting up 
> > > > SQL Whitelist Read 0 whitelist entries
> > > > Config: calling custom init function MailWatchLogging Started 
> > > > SQL Logging child
> > > > Config: calling custom init function SQLBlacklist Starting up 
> > > > SQL Blacklist Read 0 blacklist entries
> > > >
> > > > Checking version numbers...
> > > > Version number in MailScanner.conf (5.0.2) is correct.
> > > >
> > > > ERROR: The "envelope_sender_header" in your spamassassin.conf
> > > > ERROR: is not correct, it should match 
> > > > X-yoursite-MailScanner-From
> > > >
> > > > MailScanner setting GID to (1001) MailScanner setting UID to 
> > > > (106)
> > > >
> > > > Checking for SpamAssassin errors (if you use it)...
> > > > Using SpamAssassin results cache Connected to SpamAssassin cache 
> > > > database
> > > > pyzor: check failed: internal error, python traceback seen in 
> > > > response SpamAssassin reported no errors.
> > > > Auto: Found virus scanners: clamd Connected to Processing 
> > > > Attempts Database Created Processing Attempts Database 
> > > > successfully There are 0 messages in the Processing Attempts 
> > > > Database Using locktype = posix MailScanner.conf says "Virus 
> > > > Scanners = auto"
> > > > Found these virus scanners installed: clamd 
> > > > ================================================================
> > > > == == == ===== Filename Checks: Windows/DOS Executable (1 
> > > > eicar.com) Other
> > > > Checks: Found 1 problems Virus and Content Scanning: Starting
> > > > Clamd::INFECTED:: Eicar-Test-Signature :: ./1/eicar.com Virus
> > > > Scanning: Clamd found 2 infections Infected message 1 came from
> > > > 10.1.1.1 Virus Scanning: Found 2 viruses 
> > > > ================================================================
> > > > ==
> > > > ==
> > > > ==
> > > > =====
> > > > Virus Scanner test reports:
> > > > Clamd said "eicar.com was infected: Eicar-Test-Signature"
> > > >
> > > > If any of your virus scanners (clamd) are not listed there, you 
> > > > should check that they are installed correctly and that 
> > > > MailScanner is finding them correctly via its virus.scanners.conf.
> > > > Config: calling custom end function SQLWhitelist Closing down 
> > > > SQL Whitelist
> > > > Config: calling custom end function MailWatchLogging
> > > > Config: calling custom end function SQLBlacklist Closing down 
> > > > SQL Blacklist
> > > >
> > > > ***************************************************************
> > > >
> > > > So, obviously it reads my site-specific configuration file but 
> > > > it keeps showing that error message regarding 
> > > > envelope_sender_header setting. When I change %org-name% in the 
> > > > /etc/MailScanner/MailScanner.conf file same as my site-specific 
> > > > setting, the error message goes away. I believe this is a bug? 
> > > > Or Am I doing something
> > > wrong? Thanks a lot.
> > > >
> > > > Eoin Kim
> > > > Systems Administrator
> > > >
> > > > RCS Telecommunications
> > > > Level 1, 133 Mary Street
> > > > Brisbane, QLD, 4000
> > > > Office: 07 3228 0843
> > > > Mobile: 0419 726 231
> > > > Email: eoin.kim at rcst.com.au
> > > >
> > > > [RCST logo drop shadow]
> > > >
> > > >
> > > >
> > > > --
> > > > MailScanner mailing list
> > > > mailscanner at lists.mailscanner.info
> > > > http://lists.mailscanner.info/listinfo/mailscanner
> > > >
> > > >
> > >
> > >
> > > --
> > > MailScanner mailing list
> > > mailscanner at lists.mailscanner.info
> > > http://lists.mailscanner.info/listinfo/mailscanner
> > >
> > >
> > >
> > >
> > >
> > > --
> > > MailScanner mailing list
> > > mailscanner at lists.mailscanner.info
> > > http://lists.mailscanner.info/listinfo/mailscanner
> > >
> > >
> >
> >
> > --
> > MailScanner mailing list
> > mailscanner at lists.mailscanner.info
> > http://lists.mailscanner.info/listinfo/mailscanner
> >
> >
> >
> >
> >
> > --
> > MailScanner mailing list
> > mailscanner at lists.mailscanner.info
> > http://lists.mailscanner.info/listinfo/mailscanner
> >
> >
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/listinfo/mailscanner
>
>
>
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/listinfo/mailscanner
>
>


--
MailScanner mailing list
mailscanner at lists.mailscanner.info
http://lists.mailscanner.info/listinfo/mailscanner





More information about the MailScanner mailing list