MailScanner --lint %org-name% not importing

Jerry Benton jerry.benton at mailborder.com
Sun Jul 24 23:18:51 UTC 2016


Edit /etc/MailScanner/spamassassin.conf

find: envelope_sender_header

Change it to match what the MailScanner --lint is telling you to change it to.


-
Jerry Benton
www.mailborder.com
+1 - 844-436-6245


-----Original Message-----
From: Eoin Kim <eoin.kim at rcst.com.au>
Reply: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Date: July 24, 2016 at 7:17:25 PM
To: MailScanner Discussion <mailscanner at lists.mailscanner.info>
Subject:  RE: MailScanner --lint %org-name% not importing

> Hello Jerry,
>
> Sorry but I don't understand what you said. Such a tiny information to me. I have spamassassin.conf
> file in /etc/MailScanner directory which is linked to /etc/spamassassin/MailScanner.cf
> file. So, if I change spamassassin.conf file, it should just work, correct?
>
> Eoin
>
> -----Original Message-----
> From: MailScanner [mailto:mailscanner-bounces+eoin.kim=rcst.com.au at lists.mailscanner.info]
> On Behalf Of Jerry Benton
> Sent: Monday, 25 July 2016 9:14 AM
> To: MailScanner Discussion
> Subject: Re: MailScanner --lint %org-name% not importing
>
> The files in /conf.d have no impact on spamassassin.conf. You need to edit that file.
>
>
> -
> Jerry Benton
> www.mailborder.com
> +1 - 844-436-6245
>
>
> -----Original Message-----
> From: Eoin Kim
> Reply: MailScanner Discussion
> Date: July 24, 2016 at 7:10:54 PM
> To: mailscanner at lists.mailscanner.info
> Subject: MailScanner --lint %org-name% not importing
>
> > Hi,
> >
> > I am not sure if it is the desired behaviour but my MailScanner
> > doesn't import my configuration setting.
> >
> > I made site-specific configuration file inside /etc/MailScanner/conf.d
> > directory and inside that file I set %org-name%. However, when I run
> > MailScanner --lint, I get this
> > error:
> >
> > ***************************************************************
> > sysadmin at mail1.mynetwork.lab.int:~$ sudo MailScanner --lint Trying to
> > setlogsock(unix)
> >
> > Reading configuration file /etc/MailScanner/MailScanner.conf Reading
> > configuration file /etc/MailScanner/conf.d/mynetwork.conf
> > Read 501 hostnames from the phishing whitelist Read 15359 hostnames
> > from the phishing blacklists
> > Config: calling custom init function SQLWhitelist Starting up SQL
> > Whitelist Read 0 whitelist entries
> > Config: calling custom init function MailWatchLogging Started SQL
> > Logging child
> > Config: calling custom init function SQLBlacklist Starting up SQL
> > Blacklist Read 0 blacklist entries
> >
> > Checking version numbers...
> > Version number in MailScanner.conf (5.0.2) is correct.
> >
> > ERROR: The "envelope_sender_header" in your spamassassin.conf
> > ERROR: is not correct, it should match X-yoursite-MailScanner-From
> >
> > MailScanner setting GID to (1001)
> > MailScanner setting UID to (106)
> >
> > Checking for SpamAssassin errors (if you use it)...
> > Using SpamAssassin results cache
> > Connected to SpamAssassin cache database
> > pyzor: check failed: internal error, python traceback seen in response
> > SpamAssassin reported no errors.
> > Auto: Found virus scanners: clamd
> > Connected to Processing Attempts Database Created Processing Attempts
> > Database successfully There are 0 messages in the Processing Attempts
> > Database Using locktype = posix MailScanner.conf says "Virus Scanners
> > = auto"
> > Found these virus scanners installed: clamd
> > ======================================================================
> > ===== Filename Checks: Windows/DOS Executable (1 eicar.com) Other
> > Checks: Found 1 problems Virus and Content Scanning: Starting
> > Clamd::INFECTED:: Eicar-Test-Signature :: ./1/eicar.com Virus
> > Scanning: Clamd found 2 infections Infected message 1 came from
> > 10.1.1.1 Virus Scanning: Found 2 viruses
> > ======================================================================
> > =====
> > Virus Scanner test reports:
> > Clamd said "eicar.com was infected: Eicar-Test-Signature"
> >
> > If any of your virus scanners (clamd)
> > are not listed there, you should check that they are installed
> > correctly and that MailScanner is finding them correctly via its virus.scanners.conf.
> > Config: calling custom end function SQLWhitelist Closing down SQL
> > Whitelist
> > Config: calling custom end function MailWatchLogging
> > Config: calling custom end function SQLBlacklist Closing down SQL
> > Blacklist
> >
> > ***************************************************************
> >
> > So, obviously it reads my site-specific configuration file but it
> > keeps showing that error message regarding envelope_sender_header
> > setting. When I change %org-name% in the
> > /etc/MailScanner/MailScanner.conf file same as my site-specific
> > setting, the error message goes away. I believe this is a bug? Or Am I doing something
> wrong? Thanks a lot.
> >
> > Eoin Kim
> > Systems Administrator
> >
> > RCS Telecommunications
> > Level 1, 133 Mary Street
> > Brisbane, QLD, 4000
> > Office: 07 3228 0843
> > Mobile: 0419 726 231
> > Email: eoin.kim at rcst.com.au
> >
> > [RCST logo drop shadow]
> >
> >
> >
> > --
> > MailScanner mailing list
> > mailscanner at lists.mailscanner.info
> > http://lists.mailscanner.info/listinfo/mailscanner
> >
> >
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/listinfo/mailscanner
>
>
>
>
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/listinfo/mailscanner
>
>


More information about the MailScanner mailing list