MailScanner 4.84.3-1 can't deny any file.

Thu Nov 10 08:14:19 GMT 2011

Hi again, 

It's weird that your debug session hangs, I've not seen that. Maybe a lint would give more info? If not, you might need to try to debug the debug-run, maybe with strace and adding debug-prints to the MailScanner code. Or maybe try a slightly older version to verify that you only have problems with this specific version. (I have not yet stepped up to 4.84.3) 

/Markus 

----- Ursprungligt meddelande -----

Från: "吳汝剛" <ak6783 at gmail.com> 
Till: "MailScanner discussion" <mailscanner at lists.mailscanner.info> 
Skickat: tisdag, 8 nov 2011 23:56:49 
Ämne: Re: MailScanner 4.84.3-1 can't deny any file. 

Hello, 
This is test message. 
[root at mail ~]# MailScanner --debug 

In Debugging mode, not forking... 
Trying to setlogsock(unix) 
Building a message batch to scan... 
Have a batch of 1 message. 

But it's wait five minutes ago and not show any other message. 

2011/11/8 Markus Nilsson < markus at markusoft.se > 

Did you try running MailScanner in debug with just one of these messages in the queue? 

/Markus 

Från: "吳汝剛" < ak6783 at gmail.com > 
Till: "MailScanner discussion" < mailscanner at lists.mailscanner.info > 
Skickat: måndag, 7 nov 2011 2:55:58 

Ämne: Re: MailScanner 4.84.3-1 can't deny any file. 

Hello, 
Allow Filenames = N/A 
Deny Filenames = N/A 
Filename Rules = %etc-dir%/filename.rules.conf 
Allow Filetypes = N/A 
Allow File MIME Types = N/A 
Deny Filetypes = N/A 
Deny File MIME Types = N/A 
Filetype Rules = %etc-dir%/filetype.rules.conf 
N/A is not set anything. 

2011/11/3 Markus Nilsson < markus at markusoft.se > 

<blockquote>

Please print the relevant configuration settings in MailScanner! 

Allow Filenames = 
Deny Filenames = 
Filename Rules = 
Allow Filetypes = 
Allow File MIME Types = 
Deny Filetypes = 
Deny File MIME Types = 
Filetype Rules = 

Thanks! 

/Markus 

Från: "吳汝剛" < ak6783 at gmail.com > 
Till: "MailScanner discussion" < mailscanner at lists.mailscanner.info > 
Skickat: torsdag, 3 nov 2011 10:56:36 
Ämne: Re: MailScanner 4.84.3-1 can't deny any file. 

Hello 
Is it found any problem? 
Why use 4.84.3-1 can't deny file? 

2011/11/2 Denis Beauchemin < Denis.Beauchemin at usherbrooke.ca > 

<blockquote>

I wouldn’t be surprised if you forgot to stop the default sendmail (/sbin/chkconfig –list sendmail should say it is OFF at all levels). You must turn it off (/sbin/chkconfig sendmail off; /sbin/service sendmail stop) and then start/restart MailScanner. 

Are there any headers added by MailScanner in your received emails? You should have some. If you don’t have any, it’s because of what I described in the previous paragraph. 

Denis 

Denis Beauchemin 
Architecte Technologique - Section Infrastructure des serveurs 
Service des technologies de l’information (S.T.I.) 
Université de Sherbrooke 
Courriel: Denis.Beauchemin at USherbrooke.ca 
Tél.: 819-821-8000 Poste: 62252 

De : mailscanner-bounces at lists.mailscanner.info [mailto: mailscanner-bounces at lists.mailscanner.info ] De la part de ??? 
Envoyé : 1 novembre 2011 22:44 
À : mailscanner at lists.mailscanner.info 
Objet : MailScanner 4.84.3-1 can't deny any file. 

Hello, 
I test MailScanner 4.84.3-1 on Fedora 13 and Fedora 14. 
It's can't deny any attachment at filetname.rules.conf list. 
Example: 
The default set deny .cur and .reg attachment. 
But when I send mail with .cur or .reg attachment. 
It's always can received this mail. 
And I check maillog. 
It's no show any error message. 
Please check it. 
I list fedora 13 and 14 some information. 

[root at tw14 MailScanner]# MailScanner -v 
Running on 
Linux tw14.linguitronics.com 2.6.35.13-91 .fc14.i686 #1 SMP Tue May 3 13:36:36 UTC 2011 i686 i686 i386 GNU/Linux 
This is Fedora release 14 (Laughlin) 
This is Perl version 5.012003 (5.12.3) 

This is MailScanner version 4.84.3 

[root at tw ~]# MailScanner -v 
Running on 
Linux tw.linguitronics.com 2.6.34.9-69.fc13.i686 #1 SMP Tue May 3 09:20:30 UTC 2011 i686 i686 i386 GNU/Linux 
This is Fedora release 13 (Goddard) 
This is Perl version 5.010001 (5.10.1) 

This is MailScanner version 4.84.3 

</blockquote>

-- 
MailScanner mailing list 
mailscanner at lists.mailscanner.info 
http://lists.mailscanner.info/mailman/listinfo/mailscanner 

Before posting, read http://wiki.mailscanner.info/posting 

Support MailScanner development - buy the book off the website! 

</blockquote>

-- 
吳汝剛 
個人網頁 http://pc.aspa.idv.tw 
個人Blog http://ak6783.blogspot.com/ 
Twitter http://twitter.com/akong77 
Plurk http://www.plurk.com/akong77 
Facebook http://www.facebook.com/akong77 
Email (1) : akong at aspa.idv.tw 
Email (2) : ak6783 at gmail.com 
手機 : 0960599655 

WebRep 
Overall rating 

	MailScanner CronLabAntiSpamAppliance Signature	Bearcom scanned this message. We don't think it was spam. Was it? Report here! 
-- 
MailScanner mailing list 
mailscanner at lists.mailscanner.info 
http://lists.mailscanner.info/mailman/listinfo/mailscanner 

Before posting, read http://wiki.mailscanner.info/posting 

Support MailScanner development - buy the book off the website! 

-------------- next part --------------
Skipped content of type multipart/related