Clamd install

[donald.dawson at bakerbotts.com]

Phil - thanks for the info.

To use rpmforge yum repo, I am executing the following steps:

(review packages to download:  http://packages.sw.be/rpmforge-release/ )

wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.2-2.el3.rf.i386.rpm

rpm -Uvh rpmforge-release-0.5.2-1.rf.src.rpm

vi /etc/yum.repos.d/rpmforge.repo (just installed rpm from above)
change 'enabled = 1' to 'enabled = 0'  (keeps repo from being used unless explicitly chosen)

Manually specify the repo, action and package

e.g. yum install --enablerepo=rpmforge clamd

Please let me know if I am on the right track.

Thanks,
Donald

Donald Dawson
Security Administrator
Baker Botts L.L.P.
One Shell Plaza
910 Louisiana
Houston, TX 77002
W: 713-229-2183

-----Original Message-----
From: mailscanner-bounces at lists.mailscanner.info [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Randal, Phil
Sent: Wednesday, March 30, 2011 12:17 PM
To: MailScanner discussion
Subject: RE: Clamd install

The smart way to find out would be to add the rpmforge yum repo, configure it to allow clam* only, and then

yum install clamd

Cheers,

Phil

-- 
Phil Randal | Infrastructure Engineer 
NHS Herefordshire & Herefordshire Council  | Deputy Chief Executive's Office | I.C.T. Services Division 
Thorn Office Centre, Rotherwas, Hereford, HR2 6JT 
Tel: 01432 260160

-----Original Message-----
From: mailscanner-bounces at lists.mailscanner.info [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Dimitri Yioulos
Sent: 30 March 2011 18:00
To: MailScanner discussion
Subject: Re: Clamd install

On Wednesday 30 March 2011 12:29:18 pm
donald.dawson at bakerbotts.com wrote:
> Yesterday I upgraded MailScanner, SpamAssassin and Clamav using the 
> install files from the MailScanner site.
>
> When I started to install the SpamAssassin/Clam software I was 
> cautioned to exit the script and install clamd from an rpm site and 
> then come back to finish the install.
>
> I was able to download the 96.5 and 97 code, but I was not able to 
> install them due to missing libraries.  Here's a snippet from the 
> SA/CLAM install script:
>
> 	There are 2 recommended ways of installing ClamAV, depending on 
> various factors.
> 	If you want to use MailScanners support for Clamd (virus-scanning
> 	daemon) then I recommend you cancel this script now (press Ctrl-C)
> 	and install the RPMs for clamav, clamav-db and clamd from 
> http://packages.sw.be/clamav/
> 	Then re-run this script and tell me that clamscan is installed in
> 	/usr/bin. This will set up your
> virus.scanners.conf file for you.
>
> Using these downloads:
> 	http://packages.sw.be/clamav/clamav-0.96.5-1.e
>l6.rf.i686.rpm
> http://packages.sw.be/clamav/clamav-db-0.96.5-1
>.el6.rf.i686.rpm
> http://packages.sw.be/clamav/clamd-0.96.5-1.el6
>.rf.i686.rpm
>
> I received the following errors:
>
> # rpm -Uvh clamav-0.96.5-1.el6.rf.i686.rpm 
> clamav-0.96.5-1.el6.rf.i686.rpm clamav-db-0.96.5-1.el6.rf.i686.rpm 
> warning:
> clamav-0.96.5-1.el6.rf.i686.rpm: Header V3 DSA
> signature: NOKEY, key ID 6b8d79e6
> warning: package clamav = 0.96.5-1.el6.rf was already added, skipping 
> clamav < 0.96.5-1.el6.rf
> error: Failed dependencies:
>         libltdl.so.7 is needed by
> clamav-0.96.5-1.el6.rf.i686 rpmlib(FileDigests) <= 4.6.0-1 is needed 
> by
> clamav-0.96.5-1.el6.rf.i686
>         rpmlib(PayloadIsXz) <= 5.2-1 is needed by 
> clamav-0.96.5-1.el6.rf.i686
>         rpmlib(FileDigests) <= 4.6.0-1 is needed by 
> clamav-db-0.96.5-1.el6.rf.i686
>         rpmlib(PayloadIsXz) <= 5.2-1 is needed by 
> clamav-db-0.96.5-1.el6.rf.i686
>
> Note, I removed the .96.4 version via 'rpm -e'.
>
> I am now using ClamAV from the tarball install off of the MailScanner 
> site, but I would prefer to use clamd.
>
> Also, I have to remove the clam-related files installed by the tarball 
> if I am going to install clamd, since they are not loaded in the same 
> locations.
>
> Please guide me on how I can install clamd.
>
> Thanks,
> Donald
>
> Donald Dawson
> Security Administrator
> Baker Botts L.L.P.
> One Shell Plaza
> 910 Louisiana
> Houston, TX 77002
> W: 713-229-2183
>
>
> Confidentiality Notice: The information contained in this email and 
> any attachments is intended only for the recipient[s] listed above and 
> may be privileged and confidential. Any dissemination, copying, or use 
> of or reliance upon such information by or to anyone other than the 
> recipient[s] listed above is prohibited. If you have received this 
> message in error, please notify the sender immediately at the email 
> address above and destroy any and all copies of this message.


Possibly missing rpm-devel and/or rpm-libs?

--
This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

--
MailScanner mailing list
mailscanner at lists.mailscanner.info
http://lists.mailscanner.info/mailman/listinfo/mailscanner

Before posting, read http://wiki.mailscanner.info/posting

Support MailScanner development - buy the book off the website! 
-- 
MailScanner mailing list
mailscanner at lists.mailscanner.info
http://lists.mailscanner.info/mailman/listinfo/mailscanner

Before posting, read http://wiki.mailscanner.info/posting

Support MailScanner development - buy the book off the website!