Clamd install

[Dimitri Yioulos]

On Wednesday 30 March 2011 12:29:18 pm 
donald.dawson at bakerbotts.com wrote:
> Yesterday I upgraded MailScanner, SpamAssassin
> and Clamav using the install files from the
> MailScanner site.
>
> When I started to install the SpamAssassin/Clam
> software I was cautioned to exit the script and
> install clamd from an rpm site and then come
> back to finish the install.
>
> I was able to download the 96.5 and 97 code,
> but I was not able to install them due to
> missing libraries.  Here's a snippet from the
> SA/CLAM install script:
>
> 	There are 2 recommended ways of installing
> ClamAV, depending on various factors.
> 	If you want to use MailScanners support for
> Clamd (virus-scanning
> 	daemon) then I recommend you cancel this
> script now (press Ctrl-C)
> 	and install the RPMs for clamav, clamav-db and
> clamd from http://packages.sw.be/clamav/
> 	Then re-run this script and tell me that
> clamscan is installed in
> 	/usr/bin. This will set up your
> virus.scanners.conf file for you.
>
> Using these downloads:
> 	http://packages.sw.be/clamav/clamav-0.96.5-1.e
>l6.rf.i686.rpm
> http://packages.sw.be/clamav/clamav-db-0.96.5-1
>.el6.rf.i686.rpm
> http://packages.sw.be/clamav/clamd-0.96.5-1.el6
>.rf.i686.rpm
>
> I received the following errors:
>
> # rpm -Uvh clamav-0.96.5-1.el6.rf.i686.rpm
> clamav-0.96.5-1.el6.rf.i686.rpm
> clamav-db-0.96.5-1.el6.rf.i686.rpm warning:
> clamav-0.96.5-1.el6.rf.i686.rpm: Header V3 DSA
> signature: NOKEY, key ID 6b8d79e6
> warning: package clamav = 0.96.5-1.el6.rf was
> already added, skipping clamav <
> 0.96.5-1.el6.rf
> error: Failed dependencies:
>         libltdl.so.7 is needed by
> clamav-0.96.5-1.el6.rf.i686 rpmlib(FileDigests)
> <= 4.6.0-1 is needed by
> clamav-0.96.5-1.el6.rf.i686
>         rpmlib(PayloadIsXz) <= 5.2-1 is needed
> by clamav-0.96.5-1.el6.rf.i686
>         rpmlib(FileDigests) <= 4.6.0-1 is
> needed by clamav-db-0.96.5-1.el6.rf.i686
>         rpmlib(PayloadIsXz) <= 5.2-1 is needed
> by clamav-db-0.96.5-1.el6.rf.i686
>
> Note, I removed the .96.4 version via 'rpm -e'.
>
> I am now using ClamAV from the tarball install
> off of the MailScanner site, but I would prefer
> to use clamd.
>
> Also, I have to remove the clam-related files
> installed by the tarball if I am going to
> install clamd, since they are not loaded in the
> same locations.
>
> Please guide me on how I can install clamd.
>
> Thanks,
> Donald
>
> Donald Dawson
> Security Administrator
> Baker Botts L.L.P.
> One Shell Plaza
> 910 Louisiana
> Houston, TX 77002
> W: 713-229-2183
>
>
> Confidentiality Notice: The information
> contained in this email and any attachments is
> intended only for the recipient[s] listed above
> and may be privileged and confidential. Any
> dissemination, copying, or use of or reliance
> upon such information by or to anyone other
> than the recipient[s] listed above is
> prohibited. If you have received this message
> in error, please notify the sender immediately
> at the email address above and destroy any and
> all copies of this message.


Possibly missing rpm-devel and/or rpm-libs?

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.