Mailscanner does not scan mails

[Alex Broens]

At the bottom of your first post:

ERROR: The "envelope_sender_header" in your spam.assassin.prefs.conf
ERROR: is not correct, it should match X-VOSSCHEMIE-MailScanner-From

- you've configured MS clamavmodule (not recommended) but it seems you 
also have clamd (recommended)

Alex


On 2010-10-08 14:44, LGi at b-w-computer.de wrote:
> yes, i think permissions are OK
> 
> fw-1 opt # ls -ls /var/spool/postfix/
> total 20
>  0 drwx------  2 postfix root        6 Oct  8 14:40 active
>  0 drwx------  2 postfix root        6 Oct  8 13:41 bounce
>  0 drwx------  2 postfix root        6 Apr  5  2006 corrupt
>  0 drwx------ 18 postfix root      134 Apr 26  2006 defer
>  0 drwx------ 18 postfix root      134 Apr 26  2006 deferred
>  0 drwx------  2 postfix root       45 Oct  1 08:27 flush
> 12 drwx------  2 postfix root     8192 Oct  8 14:42 hold
>  0 drwx------  2 postfix root       61 Oct  8 14:42 incoming
>  0 drwx-wx---  2 postfix postdrop   25 Oct  8 14:07 maildrop
>  4 drwxr-xr-x  2 root    root     4096 Sep  1  2008 pid
>  4 drwx------  2 postfix root     4096 Oct  7 20:05 private
>  0 drwx--x---  2 postfix postdrop   68 Oct  7 20:05 public
>  0 drwx------  2 postfix root        6 Apr  5  2006 saved
>  0 drwx------  2 postfix root       44 Oct  8 13:32 trace
> 
> 
> fw-1 opt # ls -la /var/spool/MailScanner/
> total 8
> drwxr-xr-x  6 postfix postfix   69 Mar  5  2009 .
> drwxr-xr-x  9 root    root      98 Mar  5  2009 ..
> drwxr-xr-x  2 postfix postfix    6 May 11  2006 bayes
> drwxr-xr-x 46 postfix postfix 4096 Oct  8 14:22 incoming
> drwxr-xr-x 34 postfix postfix 4096 Oct  8 05:23 quarantine
> drwx------  2 postfix postfix   58 Apr  7  2006 spamassassin
> 
> 
> 
> 
> Fragen? Kommen Sie jederzeit gerne auf uns zu!
> 
> Herzliche Grüße aus Hamburg
> b&w computer
> 
> Lars Gierling
> b&w computer 
> Inh.: Michael Papenhagen
> Fangdieckstr. 64
> D-22547 Hamburg | Germany
> Tel:  +49 40 / 49 296 - 0 
> Fax: +49 40 / 49 296 - 100 
> http://www.b-w-computer.de 
> 
> 
> 
> 
> 
> Von:    Alex Broens <ms-list at alexb.ch>
> An:     MailScanner discussion <mailscanner at lists.mailscanner.info>
> Datum:  08.10.2010 14:37
> Betreff:        Re: Mailscanner does not scan mails
> Gesendet von:   mailscanner-bounces at lists.mailscanner.info
> 
> 
> 
> did you check permsisions as per docs?
> MailScanner setup may reset them after running
> 
> h2h
> Alex
> 
> On 2010-10-08 14:24, LGi at b-w-computer.de wrote:
>> I just ugraded to MailScanner-4.81.4-1
>>
>> All seems fine, but it's just not scanning messages.
>> The debug output says:
>>
>>         14:10:29 Building a message batch to scan...
>>
>> but nothing happens
>>
>> ps ax shows:
>>
>>         29532 pts/3    S+     0:38 MailScanner: waiting for messages
>>
>> The Incoming Queue Dir is configured correctly:
>>
>> Incoming Queue Dir = /var/spool/postfix/hold
>>
>> When I start the job with strace the Mailscanner processs seem to look 
>> into the queue directory every 6 seconds:
>>
>> [pid 29692] chdir("/var/spool/postfix/hold") = 0
>> [pid 29692] open(".", 
> O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) 
>> = 9
>> [pid 29692] getdents64(9, /* 120 entries */, 32768) = 3824
>> [pid 29692] getdents64(9, /* 0 entries */, 32768) = 0
>> [pid 29692] close(9)                    = 0
>> [pid 29692] umask(0177)                 = 077
>> [pid 29692] umask(077)                  = 0177
>> [pid 29692] time(NULL)                  = 1286540143
>> [pid 29692] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
>> [pid 29692] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
>> [pid 29692] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
>> [pid 29692] nanosleep({6, 0}, {6, 0})   = 0
>> [pid 29692] time(NULL)                  = 1286540149
>> [pid 29692] chdir("/var/spool/postfix/hold") = 0
>> [pid 29692] open(".", 
> O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|0x80000) 
>> = 9
>> [pid 29692] getdents64(9, /* 120 entries */, 32768) = 3824
>> [pid 29692] getdents64(9, /* 0 entries */, 32768) = 0
>> [pid 29692] close(9)                    = 0
>> [pid 29692] umask(0177)                 = 077
>> [pid 29692] umask(077)                  = 0177
>> [pid 29692] time(NULL)                  = 1286540149
>> [pid 29692] rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
>> [pid 29692] rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
>> [pid 29692] rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
>> [pid 29692] nanosleep({6, 0},
>>
>>
>> There are several new messages in the directory /var/spool/postfix/hold 
>> but MailScanner does not pick them.
>>
>> any idea how to get this to work?
>> Previus Version MailScanner-4.52.2 is working fine.
>>
>>
>>
>>
>>
>> best regards
>>
>>
>> Lars Gierling
>>
>>
>>
>>
>> Think before you print
>> Diese E-Mail und alle Anhänge enthalten vertrauliche und/oder rechtlich 
>> geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder 
> 
>> diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den 
> 
>> Absender und vernichten Sie diese E-Mail und ihren Inhalt. Das 
> unerlaubte 
>> Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht 
> gestattet.
>> This e-mail and any attached files may contain confidential and/or 
>> privileged information. If you are not the intended recipient (or have 
>> received this e-mail by mistake) please notify the sender immediately 
> and 
>> delete this e-mail. Any unauthorised duplication, disclosure or 
>> distribution of this e-mail and content is strictly forbidden. 
>>
>