Email with chinese writing saying No Program Allowed

[Randal, Phil]

Tabs between each of the fields?

Cheers,

Phil 


--
Phil Randal | Networks Engineer
Herefordshire Council | Deputy Chief Executive's Office | I.C.T.
Services Division
Thorn Office Centre, Rotherwas, Hereford, HR2 6JT
Tel: 01432 260160
email: prandal at herefordshire.gov.uk

Any opinion expressed in this e-mail or any attached files are those of
the individual and not necessarily those of Herefordshire Council.

This e-mail and any attached files are confidential and intended solely
for the use of the addressee. This communication may contain material
protected by law from being passed on. If you are not the intended
recipient and have received this e-mail in error, you are advised that
any use, dissemination, forwarding, printing or copying of this e-mail
is strictly prohibited. If you have received this e-mail in error please
contact the sender immediately and destroy all copies of it.

-----Original Message-----
From: mailscanner-bounces at lists.mailscanner.info
[mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Paul
Sent: 26 August 2009 16:22
To: MailScanner discussion
Subject: Re: Email with chinese writing saying No Program Allowed

Ive changed to

allow	-	text/plain	-	-


and now the message is being blocked again?

Do I need to do anything else to get the mime check working?

Paul


Randal, Phil wrote:
> Your example will allow everything, not quite what you had in mind.
>
> try
>
> allow	-	text/plain	-	-
>
> instead
>
> Cheers,
>
> Phil
>
> --
> Phil Randal | Networks Engineer
> Herefordshire Council | Deputy Chief Executive's Office | I.C.T.
> Services Division
> Thorn Office Centre, Rotherwas, Hereford, HR2 6JT
> Tel: 01432 260160
> email: prandal at herefordshire.gov.uk
>
> Any opinion expressed in this e-mail or any attached files are those 
> of the individual and not necessarily those of Herefordshire Council.
>
> This e-mail and any attached files are confidential and intended 
> solely for the use of the addressee. This communication may contain 
> material protected by law from being passed on. If you are not the 
> intended recipient and have received this e-mail in error, you are 
> advised that any use, dissemination, forwarding, printing or copying 
> of this e-mail is strictly prohibited. If you have received this 
> e-mail in error please contact the sender immediately and destroy all
copies of it.
>
> -----Original Message-----
> From: mailscanner-bounces at lists.mailscanner.info
> [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Paul
> Sent: 26 August 2009 14:51
> To: MailScanner discussion
> Subject: Re: Email with chinese writing saying No Program Allowed
>
>
>   
>>> I have someone sending me an email with chinese writing in it.
>>>
>>> The problem is mailscanner blocks it as it thinks its a program - No

>>> programs allowed (msg-10911-621.txt)
>>>
>>> I ran the file command on the quarantined file and it does indeed 
>>> think its an program
>>>
>>> [root at venice n7OEIC6o017365]# file msg-10911-621.txt
>>> msg-10911-621.txt: COM executable for DOS
>>>
>>> But it just contains chinese characters.
>>>
>>> This seems to be happening on quite a few emails with chinese 
>>> writing
>>>       
>
>   
>>> in them - has anyone seen this before? or got a solution to stop 
>>> them
>>>       
>
>   
>>> being blocked?
>>>
>>> Kind Regards
>>>
>>> Paul
>>>
>>>     
>>>       
>> Not only chinese, but basically any language containing non-ascii 
>> characters can fall afoul of these "opportunistic" magic codes. 
>> Either
>>     
>
>   
>> switch to using file -i, or edit/recompile your file commands magic 
>> file... For more details, I suggest you do some mailing list 
>> searches;-).
>>
>> Cheers
>>   
>>     
> Hi Glenn
>
> Thanks for your response, I did some searches and saw mention of 
> adding a fifth field in filetype.rules.conf
>
> The output of "file -i" on the message in question is
>
> [root at venice n7OEIC6o017365]# file -i msg-10911-621.txt
> msg-10911-621.txt: text/plain; charset=iso-8859-1
>
> So I added
>
> allow   -   -   -   text/plain  
>
> to filetype.rules.conf and it seems to have solved my problem.
>
> Thanks for your help
>
> Paul
>
>
>
>   

--
MailScanner mailing list
mailscanner at lists.mailscanner.info
http://lists.mailscanner.info/mailman/listinfo/mailscanner

Before posting, read http://wiki.mailscanner.info/posting

Support MailScanner development - buy the book off the website!