MailScanner-4.76.10-2 can't install Test::Pod

[Julian Field]

Did it successfully install Test-Simple just before Test-Pod?

That should have been enough. The error message implies that it didn't 
find your Test-Simple that should have been just installed. So either it 
didn't install it or it didn't find it when it tried to build Test-Pod. 
Please can you do
     find /usr/lib64/perl5 /usr/lib/perl5 -name More.pm -print | xargs 
grep VERSION
(all on one line)
and it will tell you the version number of every copy of Test::More you 
have installed.

You don't have $PERL5LIB set to anything do you? Just do an
     echo $PERL5LIB
and be sure you get an empty line. If you don't, then do
     PERL5LIB=
     export PERL5LIB
     ./install.sh


On 13/4/09 20:24, Randal, Phil wrote:
> On CentOS 5.3, 64-bit.
> ./install.sh .....
> + umask 022
> + cd /usr/src/redhat/BUILD
> + LANG=C
> + export LANG
> + unset DISPLAY
> + cd /usr/src/redhat/BUILD
> + rm -rf Test-Pod-1.26
> + /bin/gzip -dc /usr/src/redhat/SOURCES/Test-Pod-1.26.tar.gz
> + tar -xf -
> + STATUS=0
> + '[' 0 -ne 0 ']'
> + cd Test-Pod-1.26
> ++ /usr/bin/id -u
> + '[' 0 = 0 ']'
> + /bin/chown -Rhf root .
> ++ /usr/bin/id -u
> + '[' 0 = 0 ']'
> + /bin/chgrp -Rhf root .
> + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
> + exit 0
> Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.68510
> + umask 022
> + cd /usr/src/redhat/BUILD
> + cd Test-Pod-1.26
> + LANG=C
> + export LANG
> + unset DISPLAY
> + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions 
> -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
> + perl Makefile.PL
> Checking if your kit is complete...
> Looks good
> Warning: prerequisite Test::More 0.62 not found. We have 0.6.
> Writing Makefile for Test::Pod
> + make
> cp Pod.pm blib/lib/Test/Pod.pm
> Manifying blib/man3/Test::Pod.3pm
> + make test
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" 
> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
> t/00-load..............# Testing Test::Pod 1.26, Perl 5.008008, 
> /usr/bin/perl
> t/00-load..............ok
> t/all_pod_files........ok
> t/cut-outside-block....ok 1/2
> #     Failed test (t/cut-outside-block.t at line 20)
> t/cut-outside-block....NOK 2# STDERR is:
> # #     Failed test (t/cut-outside-block.t at line 15)
> # # t/cut-outside-block.pod (5): =cut found outside a pod block.  
> Skipping to next block.
> #
> # not:
> # /#\s+Failed\ test.*?\n?.*?at\ t\/cut\-outside\-block\.t line 15.*\n?/
> #
> # # t/cut-outside-block.pod (5): =cut found outside a pod block.  
> Skipping to next block.
> #
> # as expected
> t/cut-outside-block....FAILED test 2
>         Failed 1/2 tests, 50.00% okay
> t/good.................ok
> t/item-ordering........ok 1/2
> #     Failed test (t/item-ordering.t at line 19)
> t/item-ordering........NOK 2# STDERR is:
> # #     Failed test (t/item-ordering.t at line 14)
> # # t/item-ordering.pod (32): You can't have =items (as at line 36) 
> unless the first thing after the =over is an =item
> #
> # not:
> # /#\s+Failed\ test.*?\n?.*?at\ t\/item\-ordering\.t line 14.*\n?/
> #
> # # t/item-ordering.pod (32): You can't have =items (as at line 36) 
> unless the first thing after the =over is an =item
> #
> # as expected
> t/item-ordering........FAILED test 2
>         Failed 1/2 tests, 50.00% okay
> t/load.................ok
> t/missing-file.........ok 1/3
> #     Failed test (t/missing-file.t at line 18)
> t/missing-file.........NOK 2# STDERR is:
> # #     Failed test (t/missing-file.t at line 16)
> # # t/non-existent.pod does not exist
> #
> # not:
> # /#\s+Failed\ test.*?\n?.*?at\ t\/missing\-file\.t line 16.*\n?/
> #
> # # t/non-existent.pod does not exist
> #
> # as expected
> #     Failed test (t/missing-file.t at line 28)
> t/missing-file.........NOK 3# STDERR is:
> # #     Failed test (t/missing-file.t at line 26)
> # # t/non-existent.pod does not exist
> #
> # not:
> # /#\s+Failed\ test.*?\n?.*?at\ t\/missing\-file\.t line 26.*\n?/
> #
> # # t/non-existent.pod does not exist
> #
> # as expected
> t/missing-file.........FAILED tests 2-3
>         Failed 2/3 tests, 33.33% okay
> t/pod..................ok
> t/selftest.............ok
> t/spaced-directives....skipped
>         all skipped: Not written yet
> t/unknown-directive....ok 1/2
> #     Failed test (t/unknown-directive.t at line 20)
> t/unknown-directive....NOK 2# STDERR is:
> # #     Failed test (t/unknown-directive.t at line 16)
> # # t/unknown-directive.pod (9): Unknown directive: =over4
> # # t/unknown-directive.pod (13): Unknown directive: =under
> #
> # not:
> # /#\s+Failed\ test.*?\n?.*?at\ t\/unknown\-directive\.t line 16.*\n?/
> #
> # # t/unknown-directive.pod (9): Unknown directive: =over4
> #
> # # t/unknown-directive.pod (13): Unknown directive: =under
> #
> # as expected
> t/unknown-directive....FAILED test 2
>         Failed 1/2 tests, 50.00% okay
> Failed Test           Stat Wstat Total Fail  Failed  List of Failed
> -------------------------------------------------------------------------------
> t/cut-outside-block.t                2    1  50.00%  2
> t/item-ordering.t                    2    1  50.00%  2
> t/missing-file.t                     3    2  66.67%  2-3
> t/unknown-directive.t                2    1  50.00%  2
> 1 test skipped.
> Failed 4/11 test scripts, 63.64% okay. 5/19 subtests failed, 73.68% okay.
> make: *** [test_dynamic] Error 255
> error: Bad exit status from /var/tmp/rpm-tmp.68510 (%build)
>
> RPM build errors:
>     Bad exit status from /var/tmp/rpm-tmp.68510 (%build)
> Any ideas?
> Phil

Jules

-- 
Julian Field MEng CITP CEng
www.MailScanner.info
Buy the MailScanner book at www.MailScanner.info/store

MailScanner customisation, or any advanced system administration help?
Contact me at Jules at Jules.FM

PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
PGP public key: http://www.jules.fm/julesfm.asc


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.