Solaris 10 Mail:ClamAV compile trouble

[Martin Hepworth]

On Fri, Nov 7, 2008 at 9:15 AM, Nikolaos Pavlidis
<Nikolaos.Pavlidis at beds.ac.uk> wrote:
> Hello all,
>
> After a bit more searching..I am going to have to agree with Phil. The
> problem is Mail::ClamAV, it does not support 0.94.1 ... it compiles
> great with 0.93 versions... Most people would suggest it is the compiler
> but no. I tried both GNU and SUN and the perlgcc way with all possible
> combinations. I tried to apply the patch but most hunks failed with no
> result (patch -p0 < patch).
>
> Thank you all for your support,
>
> I guess its up to us to keep "proding" Scott Beck for updates :)
>
> Regards,
>
> Nik
>
> On Tue, 2008-11-04 at 15:05 +0000, Randal, Phil wrote:
>> Hve you applied this patch to Mail::ClamAV?
>>
>> http://rt.cpan.org/Public/Bug/Display.html?id=39301
>>
>> Someone needs to prod Scott Beck to release Mail::ClamAV 0.23
>>
>> Cheers,
>>
>> Phil
>>
>> --
>> Phil Randal | Networks Engineer
>> Herefordshire Council | Deputy Chief Executive's Office | I.C.T.
> Services Division
>> Thorn Office Centre, Rotherwas, Hereford, HR2 6JT
>> Tel: 01432 260160
>> email: prandal at herefordshire.gov.uk
>>
>> Any opinion expressed in this e-mail or any attached files are those
> of the individual and not necessarily those of Herefordshire Council.
>>
>> This e-mail and any attached files are confidential and intended
> solely for the use of the addressee. This communication may contain
> material protected by law from being passed on. If you are not the
> intended recipient and have received this e-mail in error, you are
> advised that any use, dissemination, forwarding, printing or copying of
> this e-mail is strictly prohibited. If you have received this e-mail in
> error please contact the sender immediately and destroy all copies of
> it.
>>
>> -----Original Message-----
>> From: mailscanner-bounces at lists.mailscanner.info
> [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of
> Nikolaos Pavlidis
>> Sent: 04 November 2008 14:55
>> To: mailscanner at lists.mailscanner.info
>> Subject: Solaris 10 Mail:ClamAV compile trouble
>>
>> Dear All,
>>
>>
>> I am trying to install the ClamAV + SA package following the
> directions
>> from: http://wiki.mailscanner.info/doku.php?id=documentation:clamav_sa
>>
>> I installed clamav successfully and all the perl modules until I
> reached Mail::ClamAV
>>
>> I edited /usr/perl5/5.8.4/lib/i86pc-solaris-64int/Config.pm to remove
> temporarily the -KPIC and -xO3 flags (-xdepend was nowhere to be found
>> btw)
>>
>> I used both paths and got respectively the below errors, any help will
> be much appreciated. the command procedure I followed was:
>> perl Makefile.PL
>> make
>> make clean
>> change $PATH
>> perl Makefile.PL
>> make
>>
>> Any help will be much appreciated.
>> Thank you in advance.
>>
>> Nik
>>
>> The setup:
>> Solaris 10
>> Sun Studio installed
>>
>> PATHs used:
>>
>> 1.
>>
> PATH=/usr/sbin:/usr/bin:/usr/local/bin:/usr/sfw/bin:/usr/dt/bin:/usr/openwin/bin:/usr/ccs/bin:/usr/ucb
>>
> LD_LIBRARY_PATH=/usr/lib:/usr/local/lib:/usr/sfw/lib:/opt/SUNWspro/lib:/usr/local/BerkeleyDB/lib
>>
>> 2.
>>
> PATH=/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/usr/local/bin:/usr/sfw/bin:/usr/ucb
>>
> LD_LIBRARY_PATH=/opt/SUNWspro/lib:/usr/ccs/lib:/usr/lib:/usr/local/lib:/usr/sfw/lib:/usr/local/BerkeleyDB/lib
>>
>>
>> 1.
>>   Starting "make" Stage
>> make[1]: Entering directory
>> `/sysnet/build/cpan/build/Mail-ClamAV-0.22/_Inline/build/Mail/ClamAV'
>> /usr/perl5/5.8.4/bin/perl /usr/perl5/5.8.4/lib/ExtUtils/xsubpp
>> -typemap /usr/perl5/5.8.4/lib/ExtUtils/typemap   ClamAV.xs >
> ClamAV.xsc
>> && mv ClamAV.xsc ClamAV.c
>> cc -c  -I/sysnet/build/cpan/build/Mail-ClamAV-0.22
> -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
> -D_TS_ERRNO -xspace -xildoff -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\"
>> "-I/usr/perl5/5.8.4/lib/i86pc-solaris-64int/CORE"   ClamAV.c
>> cc: language ildoff not recognized
>> cc: ClamAV.c: linker input file unused because linking not done
> Running Mkbootstrap for Mail::ClamAV () chmod 644 ClamAV.bs rm -f
> blib/arch/auto/Mail/ClamAV/ClamAV.so
>> LD_RUN_PATH="/usr/lib:/usr/local/lib" cc  -G ClamAV.o  -o
>> blib/ar> make[1]: *** [blib/arch/auto/Mail/ClamAV/ClamAV.so] Error 1
>> make[1]: Leaving directory
>> `/sysnet/build/cpan/build/Mail-ClamAV-0.22/_Inline/build/Mail/ClamAV'
>>
>> 2.
>>   Starting "make" Stage
>> /usr/perl5/5.8.4/bin/perl /usr/perl5/5.8.4/lib/ExtUtils/xsubpp
>> -typemap /usr/perl5/5.8.4/lib/ExtUtils/typemap  ClamAV.xs > ClamAV.xsc
> && mv ClamAV.xsc ClamAV.c cc -c
> -I/sysnet/build/cpan/build/Mail-ClamAV-0.22 -I/usr/local/include
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_TS_ERRNO -xspace -xildoff
> -DVERSION=\"0.22\"  -DXS_VERSION=\"0.22\"
>> "-I/usr/perl5/5.8.4/lib/i86pc-solaris-64int/CORE"   ClamAV.c
>> "ClamAV.xs", line 65: warning: implicit function declaration:
>> cl_loaddbdir
>> "ClamAV.xs", line 68: warning: implicit function declaration:
> cl_loaddb "ClamAV.xs", line 308: undefined symbol: CL_EFSYNC
> "ClamAV.xs", line 321: undefined symbol: CL_ELOCKDB "ClamAV.c", line
> 450: warning: statement not reached "ClamAV.c", line 633: warning:
> statement not reached "ClamAV.c", line 663: warning: statement not
> reached "ClamAV.c", line 693: warning: statement not reached
>> cc: acomp failed for ClamAV.c
>> *** Error code 2
>> make: Fatal error: Command failed for target `ClamAV.o'
>> Current working
>> directory
>> /sysnet/build/cpan/build/Mail-ClamAV-0.22/_Inline/build/Mail/ClamAV
>>
>>
>> --
>> MailScanner mailing list
>> mailscanner at lists.mailscanner.info
>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>
>> Before posting, read http://wiki.mailscanner.info/posting
>>
>> Support MailScanner development - buy the book off the website!
> --
> 
> Nikolaos Pavlidis BSc (Hons) MBCS NCLP
> System Administrator
> University Of Bedfordshire
> Park Square LU1 3JU
> Luton, Beds, UK
> Tel: +441582489277
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
> Before posting, read http://wiki.mailscanner.info/posting
>
> Support MailScanner development - buy the book off the website!
>

Nik

another reason why clamd support in MailScanner is useful. yes it's
another daemon to worry about, but I've been using clamd since Jules
added support for it and never had an issue with clamd failing.

-- 
Martin Hepworth
Oxford, UK