ArchiveMail Exclusions

Stephen Conway sconway at wlnet.com
Fri Sep 21 18:20:29 IST 2007


Hello:

I have a small problem, for some reason my spam actions changes are not
being applied.  I have killed MailScanner, then restarted it, but still not
catching:

To:     user at domain.com        forward spam at domain.com
FromOrTo:	default	store

If I change to add the above rule, it is still always storing and no message
goes to spam at domain.com

Any ideas?

Steve

-----Original Message-----
From: mailscanner-bounces at lists.mailscanner.info
[mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Julian
Field
Sent: Tuesday, September 18, 2007 3:02 PM
To: MailScanner discussion
Subject: Re: ArchiveMail Exclusions

You need to implement your ruleset as part of your Custom Function.
Which means you'll need to find out how to add forwardeduser at domain.com 
to the list of message recipients. Take a look at the top of Message.pm 
and you'll see the message object properties list. There should be one 
there called "extrarecipients", which you should be able to add to. 
Also, read the function "HandleHamAndSpam" and you'll see how the spam 
actions are implemented. You need to copy bits of that functionality 
into your Custom Function.

Hope that's enough to get you started.

You can use a ruleset from inside a Custom Function, I worked out how to 
do that. But doing it the other way around is not so simple.

Good luck!
Jules.


Stephen Conway wrote:
> Hello:
>
> Ok, I am trying now to do what I need but with Non-Spam-Actions.  I have
the
> forwarding working but there is one problem.  We already have a custom
> function called "FleetActions" which is our default action for non-SPAM.
If
> I specify this function as the action for Non-Spam in the MailScanner.conf
> as follows:
>
> Non Spam Actions = &FleetActions
>
> Then all works as it should, our custom function in CustomConfig.pm gets
> called.  But, if I try to put it instead to a ruleset file as:
>
> Non Spam Actions = /opt/MailScanner/etc/rules/message.nonspam.rules
>
> Which is:
>
> From:   *@domain.com   and     To:     someuser at otherdomain.com
> fowardeduser at domain.com
> FromOrTo:       default &FleetActions
>
> The messages that should be forwarded are working perfectly, the problem
is
> that our custom function now doesn't get called and an error goes in log
as
> follows:
>
> " Message l8IIKrLi013637 produced illegal Non-Spam Action "&fleetactions",
> so message is being delivered"
>
> So I guess the question is, is there a way inside a ruleset file for Non
> Spam Actions to specify a custom function found in CustomConfig.pm?
>
> Thanks,
>
> Steve
>
> -----Original Message-----
> From: mailscanner-bounces at lists.mailscanner.info
> [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Julian
> Field
> Sent: Monday, September 17, 2007 12:55 PM
> To: MailScanner discussion
> Subject: Re: ArchiveMail Exclusions
>
>
>
> Stephen Conway wrote:
>   
>> Hello Julien:
>>
>> Yes, sorry I think I wasn't clear what I was asking.  I know that if you
>> enter as an action here an e-mail address that messages will go to that
>> e-mail.  But as I have seen, this sends a 'copy' of the message to the
>> address (meaning that a copy still goes to the original recipient).  Is
>> there a way for example, putting a ! in front of the address, where the
>> message is actually forwarded (not copy) to the other address?
>>   
>>     
> Do that with non-spam actions, spam actions and high-scoring spam actions.
>   
>> Also, I have another item as well.  I have blacklist file, and it seems
>>     
> that
>   
>> if MailScanner sees another 'X-Spam: No' flag in the message, that it
will
>> not block the message even if on the black list.  Any way to bypass this,
>>     
> to
>   
>> make MailScanner scan for Spam even if the message has been scanned by
>> another Relay server before?
>>   
>>     
> That's not happening. MailScanner doesn't rely on *anything* in the 
> headers to control scanning, as everything in the headers can be forged 
> by a spammer or virus writer.
>   
>> -----Original Message-----
>> From: mailscanner-bounces at lists.mailscanner.info
>> [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Julian
>> Field
>> Sent: Saturday, September 15, 2007 9:55 AM
>> To: MailScanner discussion
>> Subject: Re: ArchiveMail Exclusions
>>
>> As it says right at the top of the comment about Archive Mail =, you can 
>> include
>>
>> # Space-separated list of any combination of
>> # 1. email addresses to which mail should be forwarded,
>> # 2. directory names where you want mail to be stored,
>> # 3. file names (they must already exist!) to which mail will be appended
>> #    in "mbox" format suitable for most Unix mail systems.
>>
>> Stephen Conway wrote:
>>   
>>     
>>> Hello Julien:
>>>
>>> Thanks very much for that.  Seems to work OK.
>>>
>>> One other question, is there a way using ArchiveMail to forward messages
>>> instead of just make an archive?
>>>
>>> Ex:
>>>
>>> To:	*@domain.com	!somegroupmailbox at otherdomain.com
>>>
>>> Thanks,
>>>
>>> Steve
>>>
>>> -----Original Message-----
>>> From: mailscanner-bounces at lists.mailscanner.info
>>> [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Julian
>>> Field
>>> Sent: Thursday, September 13, 2007 4:57 PM
>>> To: MailScanner discussion
>>> Subject: Re: ArchiveMail Exclusions
>>>
>>> Stephen,
>>>
>>> Stephen Conway wrote:
>>>   
>>>     
>>>       
>>>> Hello:
>>>>
>>>> I have the requirement to archive mail for some senders to a certain
>>>>     
>>>>       
>>>>         
>>> address
>>>   
>>>     
>>>       
>>>> but not if certain senders are matched, I have put the following but it
>>>> still always archives, any way to configure this?
>>>>
>>>> From:   *@dontcopydomain.com     and     To:     @domaintobecopied.com
>>>> no
>>>>   
>>>>     
>>>>       
>>>>         
>>> That will attempt to archive the mail to a directory called "no" which 
>>> isn't what you meant. To archive nothing, you just leave it blank, so 
>>> this is what you meant:
>>> From: dontcopydomain.com and to: domaintobecopied.com
>>>   
>>>     
>>>       
>>>> From:	*@*	and	To:     @domaintobecopied.com
>>>> usertobecopied at otherdomain.com
>>>>   
>>>>     
>>>>       
>>>>         
>>> That (the second line) is the same as saying
>>> To: domaintobecopied.com usertobecopied at otherdomain.com
>>>   
>>>     
>>>       
>>>> This type of logic works well for the Max Message size rules, to have
>>>>       
>>>>         
>> size
>>   
>>     
>>>> restrictions for certain domains than others, but for this ruleset file
>>>> which is type (AllMatch) as per docs, it doesn't use same logic.
>>>>   
>>>>     
>>>>       
>>>>         
>>> Correct, as it's an "AllMatch". This means that it will archive to all 
>>> of the places and addresses specified by all the matching rules. That 
>>> seemed a sensible thing to do at the time, and I still believe is what 
>>> most people will want.
>>>
>>> If you want to make it a FirstMatch, edit 
>>> /usr/lib/MailScanner/MailScanner/ConfigDefs.pl and move this line:
>>> ArchiveMail
>>> from the [All,Other] section to the [First,Other] section.
>>> Then restart MailScanner, and you will have changed the logic it uses. 
>>> Dead easy.
>>> Remember to re-apply the change when you next upgrade MailScanner, as 
>>> changes you make to that file will be lost during the upgrade process.
>>>
>>> Jules
>>>
>>>   
>>>     
>>>       
>> Jules
>>
>>   
>>     
>
> Jules
>
>   

Jules

-- 
Julian Field MEng CITP
www.MailScanner.info
Buy the MailScanner book at www.MailScanner.info/store

MailScanner customisation, or any advanced system administration help?
Contact me at Jules at Jules.FM

PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
For all your IT requirements visit www.transtec.co.uk


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
For all your IT requirements visit www.transtec.co.uk

-- 
MailScanner mailing list
mailscanner at lists.mailscanner.info
http://lists.mailscanner.info/mailman/listinfo/mailscanner

Before posting, read http://wiki.mailscanner.info/posting

Support MailScanner development - buy the book off the website! 



-- 
ShipMail Now 30% Faster



More information about the MailScanner mailing list