MailSacanner don't work

[Kevin Miller]

Without knowing exactly what you've done so far, it's hard to say what's the matter, but in a nutshell, you want to do the following:
 
Configure sendmail as below.
As root do the following:
    chkconfig sendmail off
    chkconfig MailScanner on
install the MailScanner SUSE rpm
install spamassassin & antivirus - the combined package on the MailScanner site is a good way to go as it takes care of some mundane steps for you.
Edit /etc/MailScanner.conf as appropriate for your configuration.  There are some things in there (like org-name) which *must* be set by you.  Most things are fine with thet default setting.  But you need to go through it line by line to make choices that work best for your location.

...Kevin
--
Kevin Miller                Registered Linux User No: 307357
CBJ MIS Dept.               Network Systems Admin., Mail Admin.
155 South Seward Street     ph: (907) 586-0242
Juneau, Alaska 99801        fax: (907 586-4500
  

 

________________________________

From: mailscanner-bounces at lists.mailscanner.info [mailto:mailscanner-bounces at lists.mailscanner.info] On Behalf Of Claudio Mundin
Sent: Tuesday, March 13, 2007 9:19 AM
To: MailScanner discussion
Subject: Re: MailSacanner don't work


Hi Kevin, i make this change in the last day but te problem persist. I don't what happend


2007/3/13, Kevin Miller <Kevin_Miller at ci.juneau.ak.us >: 

	Denis Beauchemin wrote:
	> Claudio Mundin a écrit :
	>> If I startup only sendmail then sendmail listen in MailScanner warning: numerical links are often malicious: 0.0.0.0 <http://0.0.0.0>  25
	>> But the script of MailScanner throw option tu sendamil that listen
	>> in MailScanner warning: numerical links are often malicious: 127.0.0.1 <http://127.0.0.1> 
	>>
	>
	> Can anyone using Suse confirm this?  It starts fine on RH... 
	>
	> Denis
	
	I was out ill last week so this may be already answered, but with SUSE you need to edit /etc/sysconfig/mail, changing the following:
	
	  MAIL_CREATE_CONFIG="yes"
	  SMTPD_LISTEN_REMOTE="no" 
	to
	  MAIL_CREATE_CONFIG="no"
	  SMTPD_LISTEN_REMOTE="yes"
	
	It's easiest to do that in Yast/Syscofig editor, as it will then apply the changes...
	
	
	...Kevin
	--
	Kevin Miller                Registered Linux User No: 307357 
	CBJ MIS Dept.               Network Systems Admin., Mail Admin.
	155 South Seward Street     ph: (907) 586-0242
	Juneau, Alaska 99801        fax: (907 586-4500
	--
	MailScanner mailing list
	mailscanner at lists.mailscanner.info
	http://lists.mailscanner.info/mailman/listinfo/mailscanner
	
	Before posting, read http://wiki.mailscanner.info/posting
	
	Support MailScanner development - buy the book off the website!
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mailscanner.info/pipermail/mailscanner/attachments/20070313/f4974f07/attachment.html