Mailscanner not catching SPAM but manual run via SA catches it

[Dan Carl]

----- Original Message ----- 
From: "Glenn Steen" <glenn.steen at gmail.com>
To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
Sent: Saturday, November 11, 2006 2:26 AM
Subject: Re: Mailscanner not catching SPAM but manual run via SA catches it


> On 10/11/06, Dan Carl <danc at bluestarshows.com> wrote:
> >
> (snip)
> > > If you've upgraded SA, did you run the sa-update after that?
> > I ran sa-update
> Good.
> > > Does it look like MailScanners instance of SA is finding/using the
correct
> > > /var/lib/spamassassin/<version>...?
> > >
> > sorry not sure how to verify this.
> Well, the output you just showed (snipped by me:) is an indicator. You
> could add a rule that would be sure to fire into that directory,
> restart MS and run a testmessage through... and look at what rules
> fired...
Can you please explain how to do this?
Question:
Do these need to be set?
SpamAssassin Install Prefix =
SpamAssassin Local Rules Dir =
SpamAssassin Default Rules Dir =
The conf says that if spamassassin is installed in its defualt
location(which mine is)
they don't need to be set.. Correct?



> -- Glenn
> email: glenn < dot > steen < at > gmail < dot > com
> work: glenn < dot > steen < at > ap1 < dot > se
> -- 
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
> Before posting, read http://wiki.mailscanner.info/posting
>
> Support MailScanner development - buy the book off the website!