Beta 4.50.4 released -- faster than 4.49

Ken A ka at PACIFIC.NET
Thu Jan 5 16:21:26 GMT 2006


    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

Julian Field wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> 
> Did you run my ./install.sh? This should upgrade DBI for you anyway.
> If so, why did my DBI install fail?

Yes, with ./install.sh.
Sorry, but I'm not sure exactly.

> What output was produced?

Below is the relevant output. Hope this helps.

Thanks,
Ken A
Pacific.Net

---- snip -----


Attempting to build and install perl-DBI-1.50-1
Installing perl-DBI-1.50-1.src.rpm
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.33425
+ umask 022
+ cd /usr/src/redhat/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /usr/src/redhat/BUILD
+ rm -rf DBI-1.50
+ /bin/gzip -dc /usr/src/redhat/SOURCES/DBI-1.50.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd DBI-1.50
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.33425
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd DBI-1.50
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 
-march=i386 -mtune=pentium4 -fasynchronous-unwind-tables'
+ perl Makefile.PL PREFIX=/var/tmp/perl-DBI-1.50-1-root/usr

*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.

*** Note:
     The optional PlRPC-modules (RPC::PlServer etc) are not installed.
     If you want to use the DBD::Proxy driver and DBI::ProxyServer
     modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
     Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
     You can install them any time after installing the DBI.
     You do *not* need these modules for typical DBI usage.

Optional modules are available from any CPAN mirror, in particular
     http://search.cpan.org/
     http://www.perl.com/CPAN/modules/by-module
     http://www.perl.org/CPAN/modules/by-module
     ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module

Creating DBI::PurePerl    test variant: t/zvpp_01basics.t
Creating DBI::PurePerl    test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl    test variant: t/zvpp_03handle.t
Creating DBI::PurePerl    test variant: t/zvpp_04mods.t
Creating DBI::PurePerl    test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl    test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl    test variant: t/zvpp_07kids.t
Creating DBI::PurePerl    test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl    test variant: t/zvpp_09trace.t
Creating DBI::PurePerl    test variant: t/zvpp_10examp.t
Creating DBI::PurePerl    test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl    test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl    test variant: t/zvpp_15array.t
Creating DBI::PurePerl    test variant: t/zvpp_20meta.t
Creating DBI::PurePerl    test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl    test variant: t/zvpp_40profile.t
Creating DBI::PurePerl    test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl    test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl    test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl    test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl    test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl    test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl    test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl    test variant: t/zvpp_80proxy.t
Checking if your kit is complete...
Looks good

     I see you're using perl 5.008006 on i386-linux-thread-multi, okay.
     Remember to actually *read* the README file!
     Use  'make' to build the software (dmake or nmake on Windows).
     Then 'make test' to execute self tests.
     Then 'make install' to install the DBI and then delete this working
     directory before unpacking and building any DBD::* drivers.

Writing Makefile for DBI
+ make
/usr/bin/perl "-MExtUtils::Command" -e mkpath blib/lib/DBI
rm -f blib/lib/DBI/Changes.pm
cp Changes blib/lib/DBI/Changes.pm
/usr/bin/perl "-MExtUtils::Command" -e mkpath blib/lib/DBI
rm -f blib/lib/DBI/Roadmap.pm
cp Roadmap.pod blib/lib/DBI/Roadmap.pm
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp dbivport.h blib/arch/auto/DBI/dbivport.h
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h
cp lib/DBI/SQL/Nano.pm blib/lib/DBI/SQL/Nano.pm
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm
cp lib/DBD/DBM.pm blib/lib/DBD/DBM.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
cp Roadmap.pod blib/lib/Roadmap.pod
cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp lib/DBI/DBD/Metadata.pm blib/lib/DBI/DBD/Metadata.pm
cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm
cp lib/DBI/ProfileDumper/Apache.pm blib/lib/DBI/ProfileDumper/Apache.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm
cp lib/DBI/ProfileDumper.pm blib/lib/DBI/ProfileDumper.pm
cp lib/DBD/File.pm blib/lib/DBD/File.pm
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp lib/DBI/ProfileData.pm blib/lib/DBI/ProfileData.pm
/usr/bin/perl -p -e "s/~DRIVER~/Perl/g" ./Driver.xst > Perl.xsi
/usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp  -typemap 
/usr/lib/perl5/5.8.6/ExtUtils/typemap -typemap typemap  Perl.xs > 
Perl.xsc && mv Perl.xsc Perl.c
gcc -c   -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing 
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 
-I/usr/include/gdbm -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions 
-m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables 
-DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC 
"-I/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE"  -W -Wall 
-Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare 
-Wno-cast-qual -Wdisabled-optimization -Wmissing-noreturn 
-Wno-unused-parameter Perl.c
/usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp  -typemap 
/usr/lib/perl5/5.8.6/ExtUtils/typemap -typemap typemap  DBI.xs > DBI.xsc 
&& mv DBI.xsc DBI.c
gcc -c   -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing 
-pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 
-I/usr/include/gdbm -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions 
-m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables 
-DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC 
"-I/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE"  -W -Wall 
-Wpointer-arith -Wbad-function-cast -Wno-comment -Wno-sign-compare 
-Wno-cast-qual -Wdisabled-optimization -Wmissing-noreturn 
-Wno-unused-parameter DBI.c
Running Mkbootstrap for DBI ()
chmod 644 DBI.bs
rm -f blib/arch/auto/DBI/DBI.so
gcc  -shared -L/usr/local/lib DBI.o  -o blib/arch/auto/DBI/DBI.so
chmod 755 blib/arch/auto/DBI/DBI.so
cp DBI.bs blib/arch/auto/DBI/DBI.bs
chmod 644 blib/arch/auto/DBI/DBI.bs
/usr/bin/perl "-Iblib/arch" "-Iblib/lib" dbiprof.PL dbiprof
Extracted dbiprof from dbiprof.PL with variable substitutions.
cp dbiprof blib/script/dbiprof
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/dbiprof
/usr/bin/perl "-Iblib/arch" "-Iblib/lib" dbiproxy.PL dbiproxy
Extracted dbiproxy from dbiproxy.PL with variable substitutions.
cp dbiproxy blib/script/dbiproxy
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/dbiproxy
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3pm
Manifying blib/man3/DBD::Proxy.3pm
Manifying blib/man3/DBI::SQL::Nano.3pm
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3pm
Manifying blib/man3/DBD::DBM.3pm
Manifying blib/man3/DBI::Const::GetInfoReturn.3pm
Manifying blib/man3/DBI.3pm
Manifying blib/man3/DBD::Sponge.3pm
Manifying blib/man3/DBI::Const::GetInfoType.3pm
Manifying blib/man3/Roadmap.3pm
Manifying blib/man3/DBI::DBD::Metadata.3pm
Manifying blib/man3/DBI::W32ODBC.3pm
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3pm
Manifying blib/man3/DBI::ProfileDumper::Apache.3pm
Manifying blib/man3/Bundle::DBI.3pm
Manifying blib/man3/DBI::Profile.3pm
Manifying blib/man3/DBD::File.3pm
Manifying blib/man3/DBI::ProfileDumper.3pm
Manifying blib/man3/DBI::ProxyServer.3pm
Manifying blib/man3/DBI::DBD.3pm
Manifying blib/man3/Win32::DBIODBC.3pm
Manifying blib/man3/DBI::PurePerl.3pm
Manifying blib/man3/DBI::ProfileData.3pm
+ make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" 
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01basics...............ok 

         4/131 skipped: developer tests
t/02dbidrv...............ok 

t/03handle...............ok 

t/04mods.................ok 

t/05thrclone.............ok 

t/06attrs................ok 

t/07kids.................ok 

t/08keeperr..............ok 

t/09trace................ok 

t/10examp................ok 

t/11fetch................ok 

t/14utf8.................ok 

t/15array................ok 

t/20meta.................ok 

t/30subclass.............ok 

t/40profile..............ok 

t/41prof_dump............ok 

t/42prof_data............ok 

t/43profenv..............ok 

t/50dbm..................ok 

t/60preparse.............ok 

t/70callbacks............ok 

t/72childhandles.........ok 

t/80proxy................skipped
         all skipped: modules required for proxy are probably not 
installed (e.g., RPC/PlClient.pm)
t/pod....................skipped
         all skipped: Test::Pod 1.00 required for testing POD
t/zvpp_01basics..........ok 

         4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok 

         10/51 skipped: various reasons
t/zvpp_03handle..........ok 

         76/135 skipped: various reasons
t/zvpp_04mods............ok 

t/zvpp_05thrclone........ok 

t/zvpp_06attrs...........ok 

         7/137 skipped: various reasons
t/zvpp_07kids............skipped
         all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok 

t/zvpp_09trace...........ok 

t/zvpp_10examp...........ok 

         39/253 skipped: various reasons
t/zvpp_11fetch...........ok 

t/zvpp_14utf8............ok 

t/zvpp_15array...........ok 

t/zvpp_20meta............ok 

t/zvpp_30subclass........ok 

t/zvpp_40profile.........skipped
         all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
         all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
         all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
         all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok 

t/zvpp_60preparse........skipped
         all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
         all skipped: $h->{Callbacks} attribute not supported for 
DBI::PurePerl
t/zvpp_72childhandles....ok 

t/zvpp_80proxy...........skipped
         all skipped: modules required for proxy are probably not 
installed (e.g., RPC/PlClient.pm)
All tests successful, 10 tests and 140 subtests skipped.
Files=49, Tests=2306, 39 wallclock secs (26.86 cusr +  9.98 csys = 36.84 
CPU)
PERL_DL_NONLAZY=1 /usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.50 by Tim Bunce, 1.50
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in  0 wallclock secs ( 0.02 usr +  0.00 sys =  0.02 
CPU)

Testing handle creation speed...
  8064 NullP sth/s perl 5.008006 i386-linux-thread-multi (gcc 4.0.2 -O2 
-g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 
-mtune=pentium4 -fasynchronous-unwind-tables)

test.pl done
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.47884
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd DBI-1.50
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /var/tmp/perl-DBI-1.50-1-root
++ perl -V:installarchlib
+ eval 
'installarchlib='\''/usr/lib/perl5/5.8.6/i386-linux-thread-multi'\'';'
++ installarchlib=/usr/lib/perl5/5.8.6/i386-linux-thread-multi
+ mkdir -p 
/var/tmp/perl-DBI-1.50-1-root//usr/lib/perl5/5.8.6/i386-linux-thread-multi
+ make install
Manifying blib/man1/dbiprof.1
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbipport.h
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.so
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/Driver.xst
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbd_xsh.h
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbivport.h
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBIXS.h
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbi_sql.h
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.bs
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/Driver_xst.h
Files found in blib/arch: installing files in blib/lib into architecture 
dependent library tree
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Roadmap.pod
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Win32/DBIODBC.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileDumper.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Changes.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Roadmap.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileData.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/W32ODBC.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/FAQ.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/DBD.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Profile.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProxyServer.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/PurePerl.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/SQL/Nano.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileDumper/Apache.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/DBD/Metadata.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfoType.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfoReturn.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfo/ANSI.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfo/ODBC.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/File.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/NullP.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/Sponge.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/DBM.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/ExampleP.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/Proxy.pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Bundle/DBI.pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man1/dbiprof.1
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man1/dbiproxy.1
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBD::Proxy.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::W32ODBC.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBD::File.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::SQL::Nano.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/Roadmap.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::Const::GetInfoType.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::FAQ.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::Const::GetInfo::ODBC.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::PurePerl.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBD::DBM.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::Const::GetInfo::ANSI.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/Bundle::DBI.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::ProxyServer.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::ProfileDumper::Apache.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::ProfileData.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/Win32::DBIODBC.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBD::Sponge.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::DBD::Metadata.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::DBD.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::Const::GetInfoReturn.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::Profile.3pm
Installing 
/var/tmp/perl-DBI-1.50-1-root/usr/share/man/man3/DBI::ProfileDumper.3pm
Installing /var/tmp/perl-DBI-1.50-1-root/usr/bin/dbiproxy
Installing /var/tmp/perl-DBI-1.50-1-root/usr/bin/dbiprof
Writing 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/.packlist
Appending installation info to 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/5.8.6/i386-linux-thread-multi/perllocal.pod
+ '[' -x /usr/lib/rpm/brp-compress ']'
+ /usr/lib/rpm/brp-compress
+ find /var/tmp/perl-DBI-1.50-1-root/usr -type f -print
+ sed 's@^/var/tmp/perl-DBI-1.50-1-root@@g'
+ grep -v perllocal.pod
+ grep -v '\.packlist'
++ cat DBI-1.50-filelist
+ '[' '/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Bundle/DBI.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Win32/DBIODBC.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfo/ANSI.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfo/ODBC.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfoReturn.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Const/GetInfoType.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/FAQ.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/SQL/Nano.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileDumper/Apache.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProxyServer.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Profile.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Changes.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileDumper.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/PurePerl.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/W32ODBC.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/Roadmap.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/ProfileData.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/DBD/Metadata.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBI/DBD.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/Roadmap.pod
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/DBM.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/Sponge.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/File.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/Proxy.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/NullP.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/DBD/ExampleP.pm
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/Driver.xst
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbd_xsh.h
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbivport.h
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBIXS.h
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/Driver_xst.h
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.so
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.bs
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbi_sql.h
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/dbipport.h
/usr/share/man/man3/DBI::ProfileData.3pm.gz
/usr/share/man/man3/DBI::Profile.3pm.gz
/usr/share/man/man3/DBI::ProfileDumper.3pm.gz
/usr/share/man/man3/DBD::Sponge.3pm.gz
/usr/share/man/man3/DBI::Const::GetInfo::ODBC.3pm.gz
/usr/share/man/man3/DBI::PurePerl.3pm.gz
/usr/share/man/man3/Roadmap.3pm.gz
/usr/share/man/man3/DBI::ProxyServer.3pm.gz
/usr/share/man/man3/DBI::FAQ.3pm.gz
/usr/share/man/man3/DBD::DBM.3pm.gz
/usr/share/man/man3/DBD::File.3pm.gz
/usr/share/man/man3/Bundle::DBI.3pm.gz
/usr/share/man/man3/DBI::ProfileDumper::Apache.3pm.gz
/usr/share/man/man3/DBI::Const::GetInfo::ANSI.3pm.gz
/usr/share/man/man3/Win32::DBIODBC.3pm.gz
/usr/share/man/man3/DBI::Const::GetInfoType.3pm.gz
/usr/share/man/man3/DBI::DBD.3pm.gz
/usr/share/man/man3/DBI::SQL::Nano.3pm.gz
/usr/share/man/man3/DBI::W32ODBC.3pm.gz
/usr/share/man/man3/DBD::Proxy.3pm.gz
/usr/share/man/man3/DBI.3pm.gz
/usr/share/man/man3/DBI::Const::GetInfoReturn.3pm.gz
/usr/share/man/man3/DBI::DBD::Metadata.3pm.gz
/usr/share/man/man1/dbiprof.1.gz
/usr/share/man/man1/dbiproxy.1.gz
/usr/bin/dbiprof
/usr/bin/dbiproxyX' = X ']'
+ /usr/lib/rpm/find-debuginfo.sh /usr/src/redhat/BUILD/DBI-1.50
extracting debug info from 
/var/tmp/perl-DBI-1.50-1-root/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.so
643 blocks
+ /usr/lib/rpm/redhat/brp-compress
+ /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
Processing files: perl-DBI-1.50-1
Provides: DBI.so perl(Bundle::DBI) = 11.3 perl(DBD::DBM) = 0.03 
perl(DBD::DBM::Statement) perl(DBD::DBM::Table) perl(DBD::DBM::db) 
perl(DBD::DBM::dr) perl(DBD::DBM::st) perl(DBD::ExampleP) = 11.12 
perl(DBD::File) = 0.33 perl(DBD::File::Statement) perl(DBD::File::Table) 
perl(DBD::File::db) perl(DBD::File::dr) perl(DBD::File::st) 
perl(DBD::NullP) = 11.4 perl(DBD::Proxy) = 0.2004 perl(DBD::Proxy::db) 
perl(DBD::Proxy::dr) perl(DBD::Proxy::st) perl(DBD::Sponge) = 11.10 
perl(DBDI) perl(DBI) perl(DBI::Const::GetInfo::ANSI) = 1.3 
perl(DBI::Const::GetInfo::ODBC) = 1.3 perl(DBI::Const::GetInfoReturn) = 
1.4 perl(DBI::Const::GetInfoType) = 1.5 perl(DBI::DBD) = 11.21 
perl(DBI::DBD::Metadata) = 1.5 perl(DBI::FAQ) = 0.38 perl(DBI::Profile) 
= 1.7 perl(DBI::ProfileData) = 1.0 perl(DBI::ProfileDumper) = 1.0 
perl(DBI::ProfileDumper::Apache) = 1.1 perl(DBI::ProxyServer) = 0.3005 
perl(DBI::ProxyServer::db) perl(DBI::ProxyServer::dr) 
perl(DBI::ProxyServer::st) perl(DBI::SQL::Nano) = 0.03 
perl(DBI::SQL::Nano::Statement_) perl(DBI::SQL::Nano::Table_) 
perl(DBI::common)
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 
rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(VersionedDependencies) <= 
3.0.3-1
Requires: /usr/bin/perl libc.so.6 libc.so.6(GLIBC_2.0) 
libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) perl 
 >= 0:5.004 perl >= 0:5.005_03 perl >= 0:5.006_00 perl(Carp) 
perl(Config) perl(Cwd) perl(DBI) perl(DBI::Const::GetInfo::ANSI) 
perl(DBI::Const::GetInfo::ODBC) perl(DBI::Const::GetInfoType) 
perl(DBI::Profile) perl(DBI::ProfileData) perl(DBI::ProfileDumper) 
perl(DBI::ProxyServer) perl(DBI::SQL::Nano) perl(Data::Dumper) 
perl(DynaLoader) perl(Exporter) perl(Fcntl) perl(File::Spec) 
perl(Getopt::Long) perl(IO::File) perl(RPC::PlClient) >= 0.2000 
perl(RPC::PlServer) >= 0.2001 perl(Symbol) perl(UNIVERSAL) 
perl(Win32::ODBC) perl(base) perl(constant) perl(strict) perl(utf8) 
perl(vars) perl(warnings)
Checking for unpackaged file(s): /usr/lib/rpm/check-files 
/var/tmp/perl-DBI-1.50-1-root
warning: Installed (but unpackaged) file(s) found:
 
/usr/lib/debug/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/DBI.so.debug
    /usr/lib/perl5/5.8.6/i386-linux-thread-multi/perllocal.pod
 
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi/auto/DBI/.packlist
    /usr/src/debug/DBI-1.50/DBI.c
    /usr/src/debug/DBI-1.50/DBI.xs
    /usr/src/debug/DBI-1.50/DBIXS.h
Wrote: /usr/src/redhat/RPMS/noarch/perl-DBI-1.50-1.noarch.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.23721
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd DBI-1.50
+ rm -rf /var/tmp/perl-DBI-1.50-1-root
+ exit 0
Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.23721
+ umask 022
+ cd /usr/src/redhat/BUILD
+ rm -rf DBI-1.50
+ exit 0

Do not worry too much about errors from the next command.
It is quite likely that some of the Perl modules are
already installed on your system.

The important ones are HTML-Parser and MIME-tools.

I have to force installation of DBI. Sorry.
error: Failed dependencies:
         perl(RPC::PlClient) >= 0.2000 is needed by perl-DBI-1.50-1.noarch
         perl(RPC::PlServer) >= 0.2001 is needed by perl-DBI-1.50-1.noarch
         perl(Win32::ODBC) is needed by perl-DBI-1.50-1.noarch


Attempting to build and install perl-DBD-SQLite-1.11-1
Installing perl-DBD-SQLite-1.11-1.src.rpm
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.41844
+ umask 022
+ cd /usr/src/redhat/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /usr/src/redhat/BUILD
+ rm -rf DBD-SQLite-1.11
+ /bin/gzip -dc /usr/src/redhat/SOURCES/DBD-SQLite-1.11.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd DBD-SQLite-1.11
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.41844
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd DBD-SQLite-1.11
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 
-march=i386 -mtune=pentium4 -fasynchronous-unwind-tables'
+ perl Makefile.PL PREFIX=/var/tmp/perl-DBD-SQLite-1.11-1-root/usr
Checking installed SQLite version...
SQLite version must be at least 3.1.3. No header file at that
version or higher was found. Using the local version instead.
Checking if your kit is complete...
Looks good
Warning: prerequisite DBI 1.21 not found.
Writing Makefile for DBD::SQLite
+ make
cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm
/usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp  -typemap 
/usr/lib/perl5/5.8.6/ExtUtils/typemap  SQLite.xs > SQLite.xsc && mv 
SQLite.xsc SQLite.c
Cannot open 'SQLite.xsi': No such file or directory in SQLite.xs, line 72
make: *** [SQLite.c] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.41844 (%build)


RPM build errors:
     Bad exit status from /var/tmp/rpm-tmp.41844 (%build)



Missing file /usr/src/redhat/RPMS/noarch/perl-DBD-SQLite-1.11-1.noarch.rpm.
Maybe it did not build correctly?

--- snip ---


> On 4 Jan 2006, at 22:49, Ken A wrote:
> 
>> Upgrading DBI with CPAN fixed install problems on FC4 as well.
>> Thanks,
>> Ken A
>> Pacific.Net
>>
>>
>> Ken A wrote:
>>> Raymond Dijkxhoorn wrote:
>>>> Hi!
>>>>
>>>>> One thing worth mentioning: if you use rcpt splitting (one  
>>>>> message per recipient) then you should see a massive speed  
>>>>> improvement with this version.
>>>>>
>>>>> Raymond --- this may help you!
>>>>>> I would be very interested to hear what speedups you see from  
>>>>>> this new faster version.
>>>> Ok, after fetching a RPM from DAG we got SQLite going, the  
>>>> version on CPAN gave errors on FC1.
>>> Issues with SQLite on FC4 too.
>>>> Checking installed SQLite version...
>>>> SQLite version must be at least 3.1.3. No header file at that
>>>> version or higher was found. Using the local version instead.
>>>> Checking if your kit is complete...
>>>> Looks good
>>>> Warning: prerequisite DBI 1.21 not found.
>>>> Writing Makefile for DBD::SQLite
>>>> + make
>>>> cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm
>>>> /usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp  -typemap /usr/ 
>>>> lib/perl5/5.8.6/ExtUtils/typemap  SQLite.xs > SQLite.xsc && mv  
>>>> SQLite.xsc SQLite.c
>>>> Cannot open 'SQLite.xsi': No such file or directory in SQLite.xs,  
>>>> line 72
>>>> make: *** [SQLite.c] Error 1
>>>> error: Bad exit status from /var/tmp/rpm-tmp.78484 (%build)
>>>>
>>>> RPM build errors:
>>>>     Bad exit status from /var/tmp/rpm-tmp.78484 (%build)
>>>>
>>>> Missing file /usr/src/redhat/RPMS/noarch/perl-DBD- 
>>>> SQLite-1.11-1.noarch.rpm.
>>>> Maybe it did not build correctly?
>>> Ken A
>>>> Works:
>>>>
>>>> Jan  4 23:08:26 vmx30 MailScanner[21711]: Cache hit for message  
>>>> k04M8POB022446
>>>> Jan  4 23:08:26 vmx30 MailScanner[21711]: Cache hit for message  
>>>> k04M8POC022446
>>>> Jan  4 23:08:26 vmx30 MailScanner[21711]: Cache hit for message  
>>>> k04M8POA022446
>>>> Jan  4 23:08:26 vmx30 MailScanner[21711]: Cache hit for message  
>>>> k04M8PO8022446
>>>> Jan  4 23:08:26 vmx30 MailScanner[21711]: Cache hit for message  
>>>> k04M8PO9022446
>>>> Jan  4 23:08:36 vmx30 MailScanner[21955]: Cache hit for message  
>>>> k04M8Zcb022532
>>>> Jan  4 23:08:40 vmx30 MailScanner[21232]: Cache hit for message  
>>>> k04M8d8h022583
>>>> Jan  4 23:08:48 vmx30 MailScanner[21176]: Cache hit for message  
>>>> k04M8iIc022599
>>>> Jan  4 23:08:50 vmx30 MailScanner[21176]: Cache hit for message  
>>>> k04M6gST021587
>>>> Jan  4 23:08:50 vmx30 MailScanner[21176]: Cache hit for message  
>>>> k04M8hFS022595
>>>> Jan  4 23:08:51 vmx30 MailScanner[21650]: Cache hit for message  
>>>> k04M8nTe022611
>>>> Jan  4 23:08:51 vmx30 MailScanner[21650]: Cache hit for message  
>>>> k04M8nTY022611
>>>>
>>>> [root at vmx30]# grep "Cache hit for message" current | wc -l
>>>>      77
>>>>
>>>> In a couple of mins. Looking promising. Cheers!
>>>>
>>>> Bye,
>>>> Raymond.
>>>>
>>>> ------------------------ MailScanner list ------------------------
>>>> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>>> 'leave mailscanner' in the body of the email.
>>>> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>>> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>>>
>>>> Support MailScanner development - buy the book off the website!
>>>>
>>>>
>>> ------------------------ MailScanner list ------------------------
>>> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>>> 'leave mailscanner' in the body of the email.
>>> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>>> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>> Support MailScanner development - buy the book off the website!
>> ------------------------ MailScanner list ------------------------
>> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
>> 'leave mailscanner' in the body of the email.
>> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
>> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>>
>> Support MailScanner development - buy the book off the website!
> 
> - -- 
> Julian Field
> www.MailScanner.info
> Buy the MailScanner book at www.MailScanner.info/store
> PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
> 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: PGP Desktop 9.0.3 (Build 2932)
> 
> iQEVAwUBQ7zmVPw32o+k+q+hAQEPcggAjZ8qaqOD7L+GgxWv4p5SJOSU6RoGf+Uq
> VO6TIowvJe48+5cxQ2aapV/YMdqVR0XjktNV9nIQDnm2/C/xs1gGbalRWw5NLSUF
> sFJ+3ZH5PRlOqC1/M8Jmnjxoqwbmhps8EOWHon0EZ0ewfZcfuESFYewm1vQdjPRR
> buYvq1nlKW+4Q5wuudUhCKqeGGpf7gV/PiKICLM78MzLE3RYgSgYG49jXE2toPPB
> yMUqJ+UfwlNfTmR1ekph0hErShVOruyZ6V9IoGbvLq+ZqoRdYGK2a3WUke0ahDXt
> 34ZUsWBM1BZlt5Bj4FdnGFBWtD5husdtLUS9FO527CBFdF4imQGDoA==
> =OcxF
> -----END PGP SIGNATURE-----
> 

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!



More information about the MailScanner mailing list