MailScanner lint errors?
Steve Campbell
campbell at cnpapers.com
Mon Feb 6 15:07:33 GMT 2006
Never mind about the uncompression, (typo)
Steve
----- Original Message -----
From: "Julian Field" <MailScanner at ecs.soton.ac.uk>
To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
Sent: Monday, February 06, 2006 9:42 AM
Subject: Re: MailScanner lint errors?
Please apply this patch to /usr/sbin/MailScanner and then try it again.
--------------------------------------------------------------------------------
On 6 Feb 2006, at 14:33, Steve Campbell wrote:
> Julian,
>
> ----- Original Message ----- From: "Julian Field"
> <MailScanner at ecs.soton.ac.uk>
> To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
> Sent: Monday, February 06, 2006 9:13 AM
> Subject: Re: MailScanner lint errors?
>
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> On 6 Feb 2006, at 14:05, Steve Campbell wrote:
>>> Julian,
>>>
>>> I'm seeing the same with respect to the PID file. My conf file
>>> points to /var/run/ and the file does exist.
>> I'll take a look at this problem. What are your "Run As User" and
>> "Run As Group" set to?
>
> These are set to <blank>, nothing. The PID file is owned by root.root.
>
> This does not seem to affect anything and MS runs with the error.
>
>
>>> I'm also seeing the dual restart problem, where I am required to
>>> start MS twice if I stop it. I alway need to 'killall sendmail',
>>> but this doesn't cause the need to start MS twice. There are no
>>> sendmail processes running before I start MS. There are no log
>>> errors, it just doesn't start. I just thought I would mention
>>> this off-thread part in case it might have something to do with
>>> the PID problem.
>> Most likely cause is not waiting long enough between stopping and
>> starting. If there are any MailScanner processes still clearing
>> up, then it won't start.
>> Just restarting it again will extend the delay.
>
> I'll check the MailScanner processes before the next manual restarts.
>
> Thanks again. (I can never say that enough to you, Mr. Field)
>
> Steve Campbell
> campbell at cnpapers.com
> Charleston Newspapers
>
>>>
>>> MS 4.50-15
>>> MailWatch 1.0.3
>>> SA 3.10 (or whatever was the latest as of last week)
>>> Tao Linux 1.0 Update 6
>>>
>>> Thanks.
>>>
>>> Steve Campbell
>>> campbell at cnpapers.com
>>> Charleston Newspapers
>>>
>>>
>>>
>>> ----- Original Message ----- From: "Gerry Doris" <gdoris at rogers.com>
>>> To: "MailScanner discussion" <mailscanner at lists.mailscanner.info>
>>> Sent: Sunday, February 05, 2006 3:12 PM
>>> Subject: Re: MailScanner lint errors?
>>>
>>>
>>>> Julian Field wrote:
>>>>> I strongly suspect that none are relevant, apart from the
>>>>> Cannot write pid file error. Check this is set to something in
>>>>> your MailScanner.conf file.
>>>>
>>>> I checked MailScanner.conf and the MailScanner PID is set to /
>>>> var/ run/MailScanner.pid The file is really there and is being
>>>> used.
>>>>
>>>> Like I said, there are no errors in any logs and mail is being
>>>> sent and received. It was working but I can't remember the
>>>> last time I tried it.
>>>>
>>>> I'm using the latest MailWatch. Would that be confusing the
>>>> MailScanner lint operation?
>>>>
>>>>
>>>>>
>>>>> Gerry Doris wrote:
>>>>>
>>>>>> I've started seeing errors after running MailScanner --lint
>>>>>> which I haven't seen before.
>>>>>>
>>>>>> I was running 4.50.10 and decided to upgrade to 4.50.15
>>>>>> today. Everything went well and MailScanner is working
>>>>>> properly. I see no errors in any of the logs. Mail is being
>>>>>> accepted and delivered.
>>>>>>
>>>>>> MailScanner -v runs without errors but when I run MailScanner
>>>>>> -- lint I get the following:
>>>>>>
>>>>>> [root at tiger MailScanner]# MailScanner --lint
>>>>>> Read 701 hostnames from the phishing whitelist
>>>>>> Config: calling custom init function SQLBlacklist
>>>>>> Config: calling custom init function MailWatchLogging
>>>>>> Config: calling custom init function SQLWhitelist
>>>>>> Cannot write pid file , No such file or directory at /usr/
>>>>>> sbin/ MailScanner line 1238
>>>>>> Checking for SpamAssassin errors (if you use it)...
>>>>>> Using SpamAssassin results cache
>>>>>> Connected to SpamAssassin cache database
>>>>>> SpamAssassin reported no errors.
>>>>>>
>>>>>> MailScanner.conf says "Virus Scanners = clamavmodule f-prot
>>>>>> trend bitdefender"
>>>>>>
>>>>>> Use of uninitialized value in split at /usr/lib/MailScanner/
>>>>>> MailScanner/SweepViruses.pm line 2879.
>>>>>> Use of uninitialized value in concatenation (.) or string at /
>>>>>> usr/lib/MailScanner/MailScanner/SweepViruses.pm line 2880.
>>>>>> Use of uninitialized value in concatenation (.) or string at /
>>>>>> usr/lib/MailScanner/MailScanner/SweepViruses.pm line 2880.
>>>>>> Can't exec "-IsItInstalled": No such file or directory at /
>>>>>> usr/ lib/MailScanner/MailScanner/SweepViruses.pm line 2882.
>>>>>> ...snip
>>>>>> the above is repeated 5 more times
>>>>>> ...snip
>>>>>>
>>>>>> Found these virus scanners installed: bitdefender, f-prot,
>>>>>> clamavmodule, trend
>>>>>
>>>>>
>>>>
>>>> --
>>>> MailScanner mailing list
>>>> mailscanner at lists.mailscanner.info
>>>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>>>
>>>> Before posting, read http://wiki.mailscanner.info/posting
>>>>
>>>> Support MailScanner development - buy the book off the website!
>>>
>>>
>>> --
>>> MailScanner mailing list
>>> mailscanner at lists.mailscanner.info
>>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>>>
>>> Before posting, read http://wiki.mailscanner.info/posting
>>>
>>> Support MailScanner development - buy the book off the website!
>> - -- Julian Field
>> www.MailScanner.info
>> Buy the MailScanner book at www.MailScanner.info/store
>> PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
>> -----BEGIN PGP SIGNATURE-----
>> Version: PGP Desktop 9.0.4 (Build 4042)
>> iQEVAwUBQ+dZgvw32o+k+q+hAQG61AgAmQhhlnMY2x1Ze2Sxm4bXrwuLancKv54G
>> leY3Aj+Ac/AJVdkqGGHUGSRb6f0xn0YD/XTvJY6lcISunvKF7ofukk4KgKoHyEgJ
>> R0HSwASUqal52vcYBsJwfRf5ppx9ytaX5vfqyfJieqg+CpD2X8TAcEa+Rqu7V7ZP
>> 7oOBU+RMsdzMJeh8qlxX8ivpEQnd5EEeQOAaMEKmUYqm/tePystfvRQCo9sQjthU
>> wEcpp9+mpRGKTR8lzvXEQ1SZApThNhZ+PQxPGBLUQee3GhqFd4dzAEFpcJ6xINYc
>> 6QcfT2Zg5fZsmI9Gs+jD7RXCShLgI/8+YbE9L/Ogfg+6crMQbK15Kg==
>> =0kyC
>> -----END PGP SIGNATURE-----
>> --
>> This message has been scanned for viruses and
>> dangerous content by MailScanner, and is
>> believed to be clean.
>> --
>> MailScanner mailing list
>> mailscanner at lists.mailscanner.info
>> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>> Before posting, read http://wiki.mailscanner.info/posting
>> Support MailScanner development - buy the book off the website!
>
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
> Before posting, read http://wiki.mailscanner.info/posting
>
> Support MailScanner development - buy the book off the website!
--
Julian Field
www.MailScanner.info
Buy the MailScanner book at www.MailScanner.info/store
PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
--------------------------------------------------------------------------------
> --
> MailScanner mailing list
> mailscanner at lists.mailscanner.info
> http://lists.mailscanner.info/mailman/listinfo/mailscanner
>
> Before posting, read http://wiki.mailscanner.info/posting
>
> Support MailScanner development - buy the book off the website!
>
More information about the MailScanner
mailing list