SV: maillog logging level

[Steen, Glenn]

    [ The following text is in the "Windows-1252" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

To solve the MW problem, do as Martin says, find Walkers message in the mailwatch list (I think it was october 6:th it was sent), cut and paste that into a MailWatch.pm ... and use that instead of the stock one. There might be some linewraps, so ... be on the lookout for that.
Or get someone who isn't @home and replying via crummy webmail (ie not close to that file:-) to send it to you... I even think someone did that today (to this list or the MW one... I don't recall which, sorry).

It really works very nice.

-- Glenn


-----Ursprungligt meddelande-----
Från: MailScanner mailing list genom Billy A. Pumphrey
Skickat:        ti 2005-05-03 22:39
Till:   MAILSCANNER at JISCMAIL.AC.UK
Kopia:	
Ämne: Re: maillog logging level
Another good link:
http://forum.ev1servers.net/showpost.php?p=332319&postcount=85


Billy Pumphrey
IT Manager
Wooden & McLaughlin

> -----Original Message-----
> From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> Behalf Of Vladimir M Costa
> Sent: Tuesday, May 03, 2005 2:16 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: maillog logging level
> 
> Or downgrade Perl DBD-MySQL to version 2.1028
> 
> see:
> http://mailwatch.sourceforge.net/faq.html
> 
> 
> Vladimir Costa
> 
> 
> 
> On Tue, 3 May 2005 17:51:40 +0100, Martin Hepworth wrote
> > Billy
> >
> > this looks like a known problem with the current DBD::mysql and
> > Mailwatch.pm from 0.5.1.
> >
> > You need a new mailwatch.pm from the MW list archives - October 6 2004
> > by Walker Aumann.
> >
> > --
> > Martin Hepworth
> > Snr Systems Administrator
> > Solid State Logic
> > Tel: +44 (0)1865 842300
> >
> > Billy A. Pumphrey wrote:
> > > Just about there.
> > >
> > > ---
> > > MailScanner works now :) thank you
> > > ---
> > > To get my sendmail to work, I had to comment out the AuthOption=A in
> the
> > > sendmail.cf and take out the 127.0.0.1 out of the line in sendmail.cf.
> > > I just couldn't figure out how to change the sendmail.cf file using m4
> > > and the sendmail.mc file
> > >
> > > ---
> > > Mailwatch problem
> > > ---
> > > After searching the mailwatch archives and finding a little bit of
> > > information concerning the error that I am getting, I have not yet
> found
> > > an answer to this problem.  I also subscribed to the mailing list but
> > > they are not really active.
> > >
> > > May  3 04:02:23 WoodenMS MailScanner[13105]: Database ping failure
> > > attempting to  re-connect May  3 04:02:23 WoodenMS MailScanner[13105]:
> > > Cannot insert row: MySQL server has  gone away
> > >
> > > Billy Pumphrey
> > > IT Manager
> > > Wooden & McLaughlin
> > >
> > >
> > >>-----Original Message-----
> > >>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> > >>Behalf Of Billy A. Pumphrey
> > >>Sent: Monday, May 02, 2005 12:01 PM
> > >>To: MAILSCANNER at JISCMAIL.AC.UK
> > >>Subject: Re: maillog logging level
> > >>
> > >>Thanks for the answer.  I just commented this line out:
> > >>DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
> > >>
> > >>Sendmail seems to work, along with the change that I did in my other
> > >>response.
> > >>
> > >>Billy Pumphrey
> > >>IT Manager
> > >>Wooden & McLaughlin
> > >>
> > >>>-----Original Message-----
> > >>>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]
> > >
> > > On
> > >
> > >>>Behalf Of Scott Silva
> > >>>Sent: Monday, May 02, 2005 11:20 AM
> > >>>To: MAILSCANNER at JISCMAIL.AC.UK
> > >>>Subject: Re: maillog logging level
> > >>>
> > >>>Billy A. Pumphrey wrote:
> > >>>
> > >>>>---
> > >>>>NOTE: I erased the rest of the message to get by the "looks like a
> > >>>>script" error"
> > >>>>---
> > >>>>
> > >>>>Ok, telnet
> > >>>>
> > >>>>To make it clear, I have a new MailScanner machine (the one that I
> > >>
> > >>am
> > >>
> > >>>>trying to get working) and the one in production that is out of
> > >
> > > date
> > >
> > >>on
> > >>
> > >>>>software and hardware.
> > >>>>
> > >>>>Anyway, I know that sendmail is having problems because when I
> > >>
> > >>telnet to
> > >>
> > >>>>the new one it looks like it tries and just comes back to the
> > >>
> > >>command
> > >>
> > >>>>prompt.  If I telnet to the old one a connection is made and shows
> > >>
> > >>some
> > >>
> > >>>>stuff.
> > >>>>
> > >>>>Now,
> > >>>>Should I just reinstall sendmail on top of mine or something?  I
> > >>>>installed sendmail by selecting the package when installing
> > >>
> > >>centos4.0.
> > >>
> > >>>>The service appears to be running ok.  I did the ch config that
> > >
> > > the
> > >
> > >>book
> > >>
> > >>>>and web site talks about.  A service  MailScanner  restart reads
> > >>
> > >>fine
> > >>
> > >>>>for the services starting (outgoing and incoming sendmail starts
> > >>
> > >>fine).
> > >>
> > >>>>If I look at the running services it has 1 sendmail running (under
> > >>
> > >>user
> > >>
> > >>>>smmsp) which is the one that is suppose to be running isn't it?
> > >>>>
> > >>>>I was comparing the service --status-all command between the 2
> > >>
> > >>machines.
> > >>
> > >>>>The services looks the same as far as MailScanner and sendmail
> > >
> > > look.
> > >
> > >>>>There is a sendmail running on each, and MailScanner running
> > >>>>(MailScanner,incoming sendmail, outgoing sendmail)
> > >>>
> > >>>The default on ALL RedHat based sendmail installs is to only accept
> > >>>local connections (IE.. from and to 127.0.0.1)
> > >>>You will have to fix this. It is commented well in the sendmail.mc
> > >>
> > >>file.
> > >>
> > >>>Look for the section with;
> > >>>
> > >>>dnl # The following causes sendmail to only listen on the IPv4
> > >>
> > >>loopback
> > >>
> > >>>address
> > >>>dnl # 127.0.0.1 and not on any other network devices. Remove the
> > >>
> > >>loopback
> > >>
> > >>>dnl # address restriction to accept email from the internet or
> > >>
> > >>intranet.
> > >>
> > >>>dnl #
> > >>>DAEMON_OPTIONS(`Port=smtp, Name=MTA')dnl
> > >>>Your default will be different, as this has already been changed.
> > >>>
> > >>>--
> > >>>"If you have ever eaten crow,
> > >>>It don't taste like chicken!!"
> > >>>
> > >>>------------------------ MailScanner list ------------------------
> > >>>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > >>>'leave mailscanner' in the body of the email.
> > >>>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > >>>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > >>>
> > >>>Support MailScanner development - buy the book off the website!
> > >>
> > >>------------------------ MailScanner list ------------------------
> > >>To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > >>'leave mailscanner' in the body of the email.
> > >>Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > >>the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > >>
> > >>Support MailScanner development - buy the book off the website!
> > >
> > >
> > > ------------------------ MailScanner list ------------------------
> > > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > > 'leave mailscanner' in the body of the email.
> > > Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> > >
> > > Support MailScanner development - buy the book off the website!
> >
> > **********************************************************************
> >
> > This email and any files transmitted with it are confidential and
> > intended solely for the use of the individual or entity to whom they
> > are addressed. If you have received this email in error please notify
> > the system manager.
> >
> > This footnote confirms that this email message has been swept
> > for the presence of computer viruses and is believed to be clean.
> >
> > **********************************************************************
> >
> > ------------------------ MailScanner list ------------------------
> > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > 'leave mailscanner' in the body of the email.
> > Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> >
> > Support MailScanner development - buy the book off the website!
> 
> 
> --
> Universidade do Vale do Paraíba - UNIVAP.
> http://www.univap.br/
> 
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the Wiki (http://wiki.mailscanner.info/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> 
> Support MailScanner development - buy the book off the website!

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!