Problem with ClamAV update

[Ugo Bellavance]

    [ The following text is in the "ISO-8859-1" character set. ]
    [ Your display is set for the "US-ASCII" character set.  ]
    [ Some characters may be displayed incorrectly. ]

Miguel Koren OBrien de Lacy wrote:
> Ugo;
> 
> My installations use this version:
> 
> [root at rivendell root]# clamscan -V
> ClamAV 0.85.1/929/Sun Jun 12 09:11:33 2005

That is what I get in my problematic server once I run freshclam manually.

> 
> Which is the one you found 'same'. It seems to work fine:
> 
> [root at rivendell root]# grep updated /var/log/maillog
> ....
> Jun 11 16:10:22 rivendell ClamAV-autoupdate[16565]: ClamAV updated
> Jun 12 01:10:36 rivendell ClamAV-autoupdate[32549]: ClamAV updated
> Jun 12 05:03:35 rivendell ClamAV-autoupdate[21590]: ClamAV updated
> Jun 12 09:05:51 rivendell ClamAV-autoupdate[29811]: ClamAV updated
> Jun 12 10:05:52 rivendell ClamAV-autoupdate[31400]: ClamAV updated
> 
> When I check the database files they look like this:
> 
> -rw-r--r--    1 clamav   clamav      69314 Jun 12 10:05 daily.cvd
> -rw-r--r--    1 clamav   clamav    2196392 Jun  4 23:10 main.cvd
> 
> The times are in BRT.
> 
> Notice that the other one has a slightly lower minor revision number. I would update.
> 

Sorry, I don't get that one.

Thanks,

> Miguel
> 
> --
> Konsultex Informatica (http://www.konsultex.com.br)
> 
> ---------- Original Message -----------
> From: Ugo Bellavance <ugob at CAMO-ROUTE.COM>
> To: MAILSCANNER at JISCMAIL.AC.UK
> Sent: Sun, 12 Jun 2005 09:45:07 -0400
> Subject: Problem with ClamAV update
> 
> 
>>Hi,
>>
>>I get weird result from autoupdate on one of my servers:
>>
>>Excerpt from a 'sane' server:
>>
>>[root at sane root]# grep updated /var/log/maillog
>>Jun 12 08:03:52 sane ClamAV-autoupdate[9824]: ClamAV updated
>>Jun 12 09:09:29 sane ClamAV-autoupdate[18865]: ClamAV updated
>>[root at sane root]# clamscan -V
>>ClamAV 0.85.1/929/Sun Jun 12 08:11:33 2005
>>[root at sane root]# date
>>Sun Jun 12 09:40:48 EDT 2005
>>
>>Excerpt from problematic server
>>
>>[root at insanelog]# grep updated /var/log/maillog
>>Jun 12 05:01:45 instane ClamAV-autoupdate[5501]: ClamAV updated
>>Jun 12 06:02:10 insane ClamAV-autoupdate[6012]: ClamAV updated
>>[root at insane log]# clamscan -V
>>ClamAV 0.85.1/919/Tue Jun  7 08:26:14 2005
>>[root at insane log]# date
>>Sun Jun 12 06:39:11 PDT 2005
>>
>>The logs say it is updating, around the same time as my other server
>>(differences in time is because of timezone), but the definition # is
>>not reflecting the update. If I run freshclam manually:
>>
>>[root at insanelog]# freshclam
>>ClamAV update process started at Sun Jun 12 06:42:37 2005
>>main.cvd is up to date (version: 32, sigs: 34720, f-level: 5, builder:
>>tkojm)
>>Downloading daily.cvd [*]
>>daily.cvd updated (version: 929, sigs: 798, f-level: 5, builder: diego)
>>Database updated (35518 signatures) from database.clamav.net (IP:
>>195.92.99.99)
>>[root at insane log]# clamscan -V
>>ClamAV 0.85.1/929/Sun Jun 12 05:11:33 2005
>>
>>Any ideas?
>>
>>Should I enable the log in freshclam.conf?
>>
>>Regards,
>>
>>Ugo

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!