Mailscanner MRTG

[Steen, Glenn]

Perhaps because it should be port 161 (or is that a typo?).
Check from the commandline that you can snmpwalk ...

-- Glenn	

> -----Original Message-----
> From: MailScanner mailing list 
> [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Roger Jochem
> Sent: den 16 februari 2005 17:19
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: Mailscanner MRTG
> 
> 
> For some reason I'm not being able to set this up...
> 
> There is always a time out while connecting with the snmp (port 116).
> 
> ----- Original Message -----
> From: "Mike" <michael at NOMENNESCIO.NET>
> To: <MAILSCANNER at JISCMAIL.AC.UK>
> Sent: Wednesday, February 16, 2005 8:31 AM
> Subject: Re: Mailscanner MRTG
> 
> 
> > >-----Original Message-----
> > >From: MailScanner mailing list 
> [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> > >Behalf Of Roger Jochem
> > >
> > >The service wasn't running...
> >
> > ;-)
> >
> > >I started it now. Is there anything else I should do after 
> start it?
> >
> > Configure /etc/mailscanner-mrtg.conf, (change <string> with 
> your public
> SNMP string and <interfaces> with the comma separated list of 
> interfaces you
> want to monitor. Also make sure the path of snmpwalk is correct):
> >
> > # -------------
> > # SNMP SETTINGS
> > # -------------
> >
> > # Set this to no if you do not want to use snmp - note that 
> this will
> result
> > # in several graphs being blank.
> > # You must use either net-snmp or ucd-snmp, this is auto-detected
> > Use SNMP = yes
> >
> > # The UDP port that snmp listens on.  This is usually port 161.
> > SNMP port = 161
> >
> > # The Community string to use (this should be a read-only community)
> > SNMP Community = <string>
> >
> > # where is your snmpwalk command?
> > Snmpwalk Binary = /usr/bin/snmpwalk
> >
> > # Which interfaces to monitor (comma separated list)
> > Interfaces to Monitor = <interfaces>
> >
> > ------------------------ MailScanner list ------------------------
> > To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> > 'leave mailscanner' in the body of the email.
> > Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
> > the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> >
> > Support MailScanner development - buy the book off the website!
> 
> ------------------------ MailScanner list ------------------------
> To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
> the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
> 
> Support MailScanner development - buy the book off the website!
> 

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the MAQ (http://www.mailscanner.biz/maq/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!