Exim Install

Steve Evans scevans at CALPOLY.EDU
Fri Dec 2 16:22:37 GMT 2005


First it was telling me:

In Debugging mode, not forking...
Cannot create temporary Work Dir /22113. Are the permissions and ownership of  correct? at /usr/lib/MailScanner/MailScanner/WorkArea.pm line 152

Then I changed the ownership of /var/spool/MailScanner to mailnull.mailnull (which is the user and group that exim runs as) and now when I run check_MailScanner it just sits there forever with:

Starting MailScanner...
In Debugging mode, not forking...

If I run top it lists MailScanner at the top of the list but it's consuming no to little CPU. 


Steve Evans
805-756-7517

-----Original Message-----
From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Martin Hepworth
Sent: Friday, December 02, 2005 12:58 AM
To: MAILSCANNER at JISCMAIL.AC.UK
Subject: Re: Exim Install

Steve

Make sure there's something in the incoming spool

Put MailScanner into debug mode (edit MailScanner.conf and change both debug values to yes).

Stop MailScanner

Run check_mailscanner

This will dump a load of debug to the screen and you should be able to see whats happening (or not in your case)

--
Martin Hepworth
Snr Systems Administrator
Solid State Logic
Tel: +44 (0)1865 842300
> -----Original Message-----
> From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On 
> Behalf Of Steve Evans
> Sent: 01 December 2005 20:29
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: [MAILSCANNER] Exim Install
>
> I'm trying to install MailScanner with exim for the first time.  Here 
> is a list of the steps I have taken.
>
> Install MailScanner (no problems)
> Copied /etc/exim.conf to /etc/exim_scanned.conf Added these lines to 
> /etc/exim.conf
>     spool_directory = /var/spool/exim_incoming
>     queue_only = true
>
> Then down in the routers config section of /etc/exim.conf I added
>     defer_router:
>         driver = manualroute
>         route_list = * 127.0.0.1 byname
>         self = defer
>         verify = false
>
> In MailScanner.conf I modified these lines
>     Incoming Queue Dir = /var/spool/exim_incoming/input/
>     Outgoing Queue Dir = /var/spool/exim/input/
>     MTA = exim
>     Sendmail = /usr/sbin/exim
>     Sendmail2 = /usr/sbin/exim -C /etc/exim_scanned.conf
>
> Modified the file /etc/sysconfig/MailScanner
>     EXIM=/usr/sbin/exim
>     EXIMINCF=/etc/exim/exim.conf
>     EXIMSENDCF=/etc/exim/exim_scanned.conf
>
> My two queue directories have the permissions of
>     drwxr-x---   5 mailnull mail 4096 Jul 22  2004 exim/
>     drwxr-x---   5 mailnull mail 4096 Nov 30 15:45 exim_incoming/
>
>     (note:  I didn't touch the exim folder, just the exim_incoming)
>
> Then I do a service exim stop and a service MailScanner start.
>
> The mail comes into /var/spool/exim_incoming but nothing happens after 
> that.  It just stacks up there.  If I stop MailScanner, change back 
> the exim.conf file, and start exim mail flows as normal.  If I change 
> the exim.conf file to only specify a new spool directory everything 
> works fine.  So I"m pretty sure I have my queues set up correctly.  
> Obviously though MailScanner doesn't scan the mail if I do that.
>
> Can someone tell me what I'm missing?
>
> Steve Evans
> 805-756-7517
>
>
> ------------------------ MailScanner list ------------------------ To 
> unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
> 'leave mailscanner' in the body of the email.
> Before posting, read the Wiki (http://wiki.mailscanner.info/) and the 
> archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).
>
> Support MailScanner development - buy the book off the website!



**********************************************************************

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.

This footnote confirms that this email message has been swept for the presence of computer viruses and is believed to be clean.

**********************************************************************

------------------------ MailScanner list ------------------------ To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!

------------------------ MailScanner list ------------------------
To unsubscribe, email jiscmail at jiscmail.ac.uk with the words:
'leave mailscanner' in the body of the email.
Before posting, read the Wiki (http://wiki.mailscanner.info/) and
the archives (http://www.jiscmail.ac.uk/lists/mailscanner.html).

Support MailScanner development - buy the book off the website!



More information about the MailScanner mailing list