Update-MakeMaker.sh fails - what am I missing?

[Brian Parish]

OK.  This is Mandrake 10.0 official.

thanks again
Brian

On Sun, 2004-05-16 at 23:10, Michele Neylon :: Blacknight Solutions
wrote:
> Try installing the perl modules separately either from CPAN or from source.
> Which OS is this by the way?
>
>
> Mr Michele Neylon
> Blacknight Internet Solutions Ltd
> http://www.blacknight.ie/
> Tel. +353 59 9137101
>
>
> > -----Original Message-----
> > From: MailScanner mailing list
> > [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Brian Parish
> > Sent: 16 May 2004 13:50
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Re: [MAILSCANNER] Update-MakeMaker.sh fails - what
> > am I missing?
> >
> > Thanks for the reply Michele.  That would seem to be at least
> > part of the answer as installing perl-devel made Update-Maker
> > work.  I now get a better class of error message running install.sh:
> >
> > Installing
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/lib/perl5/site_perl/5.8
> > .3/Net/CIDR.pm
> > Installing
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/share/man/man3/Net::CIDR.3pm
> > Writing
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/lib/perl5/site_perl/5.8
> > .3/i386-linux-thread-multi/auto/Net/CIDR/.packlist
> > Appending installation info to
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/lib/perl5/site_perl/5.8
> > .3/i386-linux-thread-multi/perllocal.pod
> > + '[' -x /usr/lib/rpm/brp-compress ']'
> > + /usr/lib/rpm/brp-compress
> > bzip2: Bad flag `-n'
> > ----clip----
> > lots of useful info on valid flags for bzip2
> > ----clip----
> > Processing files: perl-Net-CIDR-0.09-3
> > error: File not found:
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/share/man/man3/Net::CIDR.3pm
> >
> >
> > RPM build errors:
> >     File not found:
> > /var/tmp/perl-Net-CIDR-0.09-3-root/usr/share/man/man3/Net::CIDR.3pm
> >
> > I presume it's the bzip2 problem that causes the glitch.  I
> > installed rpm-dev as well by the way.
> >
> > Any ideas on this?
> >
> > thanks again and best regards
> > Brian
> >
> > On Sun, 2004-05-16 at 21:48, Michele Neylon :: Blacknight Solutions
> > wrote:
> > > Brian
> > >
> > > You are probably missing the perl-dev and/or rpm-dev libraries.
> > > Config.h would have been installed if you had them.
> > >
> > > Michele
> > >
> > > Mr Michele Neylon
> > > Blacknight Internet Solutions Ltd
> > > http://www.blacknight.ie/
> > > Tel. +353 59 9137101
> > >
> > >
> > > > -----Original Message-----
> > > > From: MailScanner mailing list
> > > > [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf Of Brian Parish
> > > > Sent: 16 May 2004 09:52
> > > > To: MAILSCANNER at JISCMAIL.AC.UK
> > > > Subject: [MAILSCANNER] Update-MakeMaker.sh fails - what
> > am I missing?
> > > >
> > > > I have installed MailScanner previously with success, but
> > am failing
> > > > at the first hurdle with the current version on Mandrake 10.0
> > > > official.
> > > >
> > > > Update-MakeMaker.sh fails when executing the make with:
> > > >
> > > > make: *** No rule to make target
> > > > `/usr/lib/perl5/5.8.3/i386-linux-thread-multi/CORE/config.h',
> > > > needed by `Makefile'.  Stop.
> > > >
> > > > Can someone point me at the bleeding obvious please?
> > > >
> > > > TIA
> > > > Brian
> > > >
> > > > P.S. Yes I did search the archives first and the answer
> > is probably
> > > > there, but I didn't find it.
> > > >
> > > > -------------------------- MailScanner list ----------------------
> > > > To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
> > > > Before posting, please see the Most Asked Questions at
> > > > http://www.mailscanner.biz/maq/     and the archives at
> > > > http://www.jiscmail.ac.uk/lists/mailscanner.html
> > > >
> > >
> > > -------------------------- MailScanner list ----------------------
> > > To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
> > > Before posting, please see the Most Asked Questions at
> > > http://www.mailscanner.biz/maq/     and the archives at
> > > http://www.jiscmail.ac.uk/lists/mailscanner.html
> > >
> >
> > -------------------------- MailScanner list ----------------------
> > To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
> > Before posting, please see the Most Asked Questions at
> > http://www.mailscanner.biz/maq/     and the archives at
> > http://www.jiscmail.ac.uk/lists/mailscanner.html
> >
>
> -------------------------- MailScanner list ----------------------
> To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
> Before posting, please see the Most Asked Questions at
> http://www.mailscanner.biz/maq/     and the archives at
> http://www.jiscmail.ac.uk/lists/mailscanner.html
>

-------------------------- MailScanner list ----------------------
To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
Before posting, please see the Most Asked Questions at
http://www.mailscanner.biz/maq/     and the archives at
http://www.jiscmail.ac.uk/lists/mailscanner.html