MailScanner-4.28.5-1

[Erik Jakobsen]

On Fri, 5 Mar 2004 14:55:14 +0000, Julian Field
<mailscanner at ECS.SOTON.AC.UK> wrote:

>That is usually cause by the /etc/sysconfig/i18n file.
>Remove any mention of UTF8 from there and try it again.

The content of the i18n file is now:

SYSFONT="latarcyrheb-sun16

Unfortunately it did not helped much.

Checking if your kit is complete...
Looks good

Warning: I could not locate your pod2man program. Please make sure,
         your pod2man program is in your PATH before you execute 'make'

Writing Makefile for Archive::Zip
+ make 'OPTIMIZE=-O2 -g -march=i386 -mcpu=i686'
Makefile:87: *** missing separator.  Stop.
error: Bad exit status from /var/tmp/rpm-tmp.95589 (%build)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.95589 (%build)



Missing
file /usr/src/redhat/RPMS/noarch/perl-Archive-Zip-1.09-2.noarch.rpm.
Maybe it did not build correctly?


Installing tnef decoder

Preparing...                ###########################################
[100%]
        package tnef-1.1.4-sizelimit1 is already installed

Now to install MailScanner itself.

Preparing...                ###########################################
[100%]
        package mailscanner-4.28.5-2 is already installed
[root at gateway MailScanner-4.28.5-2]# service MailScanner start
Starting MailScanner daemons:
         incoming postfix:                                 [  OK  ]
         outgoing postfix:                                 [  OK  ]
         MailScanner:       Can't locate Archive/Zip.pm in @INC (@INC
contains: /usr/lib/MailScanner /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 . /usr/lib/MailScanner)
at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
BEGIN failed--compilation aborted
at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
Compilation failed in require at /usr/sbin/MailScanner line 52.
BEGIN failed--compilation aborted at /usr/sbin/MailScanner line 52.
                                                           [  OK  ]
[root at gateway MailScanner-4.28.5-2]# cd /etc/MailScanner/
[root at gateway MailScanner]# upgrade_MailScanner_conf MailScanner.conf
MailScanner.conf.rpmnew > MailScanner.new

Summary
-------
Read 190 settings from old MailScanner.conf
Used 190 settings from old MailScanner.conf
Used 0 default settings from new MailScanner.conf.rpmnew

Notes
-----
I would advise you to check on any parameters which are different between
the default new conf file and the conf file you just created, so that you
find any parameters whose default values have changed.
If you ran this with a command like this
  upgrade_MailScanner_conf MailScanner.conf MailScanner.conf.rpmnew >
MailScanner.new
then you should do
  diff MailScanner.conf.rpmnew MailScanner.new
and check for any differences in values you have not changed yourself.


Once you have checked that MailScanner.new contains what
you want, you can then save your old one and move the new
one into place, using commands like these:
  mv -f MailScanner.conf MailScanner.old
  mv -f MailScanner.new  MailScanner.conf
[root at gateway MailScanner]# mv -f MailScanner.conf MailScanner.old
[root at gateway MailScanner]#   mv -f MailScanner.new  MailScanner.con
[root at gateway MailScanner]# service MailScanner start
Starting MailScanner daemons:
         incoming postfix:                                 [  OK  ]
         outgoing postfix:                                 [  OK  ]
         MailScanner:       Can't locate Archive/Zip.pm in @INC (@INC
contains: /usr/lib/MailScanner /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 . /usr/lib/MailScanner)
at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
BEGIN failed--compilation aborted
at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
Compilation failed in require at /usr/sbin/MailScanner line 52.
BEGIN failed--compilation aborted at /usr/sbin/MailScanner line 52.
                                                       [  OK  ]

>--
>Julian Field
>www.MailScanner.info
>MailScanner thanks transtec Computers for their support
>
>PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654

/Erik