MailScanner-4.28.5-1
Julian Field
mailscanner at ecs.soton.ac.uk
Fri Mar 5 14:55:14 GMT 2004
That is usually cause by the /etc/sysconfig/i18n file.
Remove any mention of UTF8 from there and try it again.
At 14:43 05/03/2004, you wrote:
>On Fri, 5 Mar 2004 14:18:59 +0000, Julian Field
><mailscanner at ECS.SOTON.AC.UK> wrote:
>
> >All fixed in 4.28.5-2.
>
>Sorry, but something is still not working :-):
>
>Warning: I could not locate your pod2man program. Please make sure,
> your pod2man program is in your PATH before you execute 'make'
>
>Writing Makefile for Archive::Zip
>+ make 'OPTIMIZE=-O2 -g -march=i386 -mcpu=i686'
>Makefile:87: *** missing separator. Stop.
>error: Bad exit status from /var/tmp/rpm-tmp.45804 (%build)
>
>
>RPM build errors:
> Bad exit status from /var/tmp/rpm-tmp.45804 (%build)
>
>
>
>Missing
>file /usr/src/redhat/RPMS/noarch/perl-Archive-Zip-1.09-2.noarch.rpm.
>Maybe it did not build correctly?
>
>
>Installing tnef decoder
>
>Preparing... ###########################################
>[100%]
> package tnef-1.1.4-sizelimit1 is already installed
>
>Now to install MailScanner itself.
>
>Preparing... ###########################################
>[100%]
> 1:mailscanner ###########################################
>[100%]
>error reading information on service sendmail: No such file or directory
>
>To activate MailScanner run the following commands:
>
>service sendmail stop
>chkconfig sendmail off
>chkconfig --level 2345 MailScanner on
>service MailScanner start
>
>To upgrade your MailScanner.conf file automatically, run
> upgrade_MailScanner_conf
>[root at gateway MailScanner-4.28.5-2]# cd /etc/MailScanner/
>[root at gateway MailScanner]# upgrade_MailScanner_conf
>Usage:
>
>RPM
>===
>If you are using the RPM distributions then try this:
>
>cd /etc/MailScanner
>upgrade_MailScanner_conf MailScanner.conf MailScanner.conf.rpmnew >
>MailScanner.new
>mv MailScanner.conf MailScanner.old
>mv MailScanner.new MailScanner.conf
>
>TAR
>===
>If you are using the tar distribution so that the old version is in
>/opt/MailScanner and the new one is in /opt/MailScanner.new then:
>
>cd /opt/MailScanner.new/etc
>../bin/upgrade_MailScanner_conf /opt/MailScanner/etc/MailScanner.conf
>/opt/MailScanner.new/etc/MailScanner.conf
> > MailScanner.new
>mv MailScanner.conf MailScanner.old
>mv MailScanner.new MailScanner.conf
>
>NOTE
>====
>To keep your old comments in your original file, add "--keep-comments"
>to the command line. Note that this will mean you don't get to find
>out any extra new values you might be able to use in existing "improved"
>configuration options.
>
>[root at gateway MailScanner]# upgrade_MailScanner_conf MailScanner.conf
>MailScanner.conf.rpmnew > MailScanner.new
>
>Summary
>-------
>Read 190 settings from old MailScanner.conf
>Used 190 settings from old MailScanner.conf
>Used 0 default settings from new MailScanner.conf.rpmnew
>
>Notes
>-----
>I would advise you to check on any parameters which are different between
>the default new conf file and the conf file you just created, so that you
>find any parameters whose default values have changed.
>If you ran this with a command like this
> upgrade_MailScanner_conf MailScanner.conf MailScanner.conf.rpmnew >
>MailScanner.new
>then you should do
> diff MailScanner.conf.rpmnew MailScanner.new
>and check for any differences in values you have not changed yourself.
>
>
>Once you have checked that MailScanner.new contains what
>you want, you can then save your old one and move the new
>one into place, using commands like these:
> mv -f MailScanner.conf MailScanner.old
> mv -f MailScanner.new MailScanner.conf
>[root at gateway MailScanner]# mv -f MailScanner.conf MailScanner.old
>[root at gateway MailScanner]# mv -f MailScanner.new MailScanner.conf
>[root at gateway MailScanner]# service MailScanner restart
>Shutting down MailScanner daemons:
> MailScanner: [FAILED]
> incoming postfix: [ OK ]
> outgoing postfix: [ OK ]
>Starting MailScanner daemons:
> incoming postfix: [ OK ]
> outgoing postfix: [ OK ]
> MailScanner: Can't locate Archive/Zip.pm in @INC (@INC
>contains: /usr/lib/MailScanner
>/usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
>/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
>/usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
>/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
>/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
>/usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .
>/usr/lib/MailScanner)
>at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
>BEGIN failed--compilation aborted
>at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
>Compilation failed in require at /usr/sbin/MailScanner line 52.
>BEGIN failed--compilation aborted at /usr/sbin/MailScanner line 52.
> [ OK ]
>[root at gateway MailScanner]# service MailScanner start
>Starting MailScanner daemons:
> incoming postfix: [ OK ]
> outgoing postfix: [ OK ]
> MailScanner: Can't locate Archive/Zip.pm in @INC (@INC
>contains: /usr/lib/MailScanner
>/usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
>/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
>/usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
>/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
>/usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
>/usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .
>/usr/lib/MailScanner)
>at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
>BEGIN failed--compilation aborted
>at /usr/lib/MailScanner/MailScanner/Message.pm line 46.
>Compilation failed in require at /usr/sbin/MailScanner line 52.
>BEGIN failed--compilation aborted at /usr/sbin/MailScanner line 52.
> [ OK ]
--
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support
PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
More information about the MailScanner
mailing list