archive::zip error while compilation (was Re: ANNOUNCE: Stable 4.28.5 released)

[Julian Field]

At 13:34 05/03/2004, you wrote:
>Julian it's normal the installation skipped this test in module
>"perl-Compress-Zlib"
>
>
>PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
>"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
>t/01version.........ok
>t/02zlib............ok
>t/03examples........ok
>t/04encoding........skipped: Encode is not available

Yes, perfectly normal, don't worry. It's some code the author hasn't got 
around to writing yet.

>t/05gzsetp..........ok
>t/06gzdopen.........ok
>All tests successful, 1 test skipped.
>
>Rui
>
>
>-----Original Message-----
>From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf
>Of Julian Field
>Sent: sexta-feira, 5 de Março de 2004 12:52
>To: MAILSCANNER at JISCMAIL.AC.UK
>Subject: Re: archive::zip error while compilation (was Re: ANNOUNCE: Stable
>4.28.5 released)
>
>Have just released 4.28.5-2 to fix this problem.
>Minor build error, nothing too major :-)
>
>At 12:27 05/03/2004, you wrote:
> >Edit the install.sh script and change these lines
> >Compress::Zlib  Compress-Zlib   1.33    1       noarch
> >Archive::Zip    Archive-Zip     1.09    1       noarch
> >to these lines
> >Compress::Zlib  Compress-Zlib   1.33    1       i386
> >Archive::Zip    Archive-Zip     1.09    1       i386
> >
> >I am just about to release -2 which should solve this problem properly.
> >
> >At 12:00 05/03/2004, you wrote:
> >>Julian Field wrote:
> >>
> >>>Did you run the ./install.sh like the installation guides tell you to?
> >>
> >>
> >>yes.
> >>
> >>i18n changed to
> >># cat /etc/sysconfig/i18n ##LANG="de_DE.UTF-8"
> >>##SUPPORTED="de_DE.UTF-8:de_DE:de"
> >>#LANG="de_DE"
> >>#SUPPORTED="de_DE:de"
> >>LANG="C"
> >>SUPPORTED="C"
> >>SYSFONT="latarcyrheb-sun16"
> >>
> >>and reboot!
> >>no luck :-(
> >>
> >>
> >>it seems that perl-Compress-Zlib was  not installed via install.sh
> >>perl-Archiv-Zip requires perl-Compress-Zip
> >>
> >>
> >>
> >># rpmbuild --rebuild perl-Compress-Zlib-1.33-1.src.rpm
> >>[...]
> >>Wrote: /usr/src/redhat/RPMS/i386/perl-Compress-Zlib-1.33-1.i386.rpm
> >>Wrote:
> >>/usr/src/redhat/RPMS/i386/perl-Compress-Zlib-debuginfo-1.33-1.i386.rpm
> >>Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.48726
> >>+ umask 022
> >>+ cd /usr/src/redhat/BUILD
> >>+ cd Compress-Zlib-1.33
> >>+ rm -rf /var/tmp/perl-Compress-Zlib-1.33-1-root
> >>+ exit 0
> >>Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.48726
> >>+ umask 022
> >>+ cd /usr/src/redhat/BUILD
> >>+ rm -rf Compress-Zlib-1.33
> >>+ exit 0
> >>
> >>
> >># rpm -qa | grep -i compress
> >># rpm -qa | grep -i zlib
> >>zlib-devel-1.2.0.7-2
> >>zlib-1.2.0.7-2
> >>
> >># rpm -ivh /usr/src/redhat/RPMS/i386/perl-Compress-Zlib-1.33-1.i386.rpm
> >>Preparing...                ###########################################
> >>[100%]
> >>   1:perl-Compress-Zlib     ###########################################
> >>[100%]
> >># rpm -qa | grep -i compress
> >>perl-Compress-Zlib-1.33-1
> >>
> >>
> >># rpm -qa | grep -i compress
> >>
> >># rpmbuild --rebuild perl-Archive-Zip-1.09-1.src.rpm
> >>Wrote: /usr/src/redhat/RPMS/i386/perl-Archive-Zip-1.09-1.i386.rpm
> >>Wrote:
>/usr/src/redhat/RPMS/i386/perl-Archive-Zip-debuginfo-1.09-1.i386.rpm
> >>Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.83163
> >>+ umask 022
> >>+ cd /usr/src/redhat/BUILD
> >>+ cd Archive-Zip-1.09
> >>+ rm -rf /var/tmp/perl-Archive-Zip-1.09-1-root
> >>+ exit 0
> >>Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.83163
> >>+ umask 022
> >>+ cd /usr/src/redhat/BUILD
> >>+ rm -rf Archive-Zip-1.09
> >>+ exit 0
> >>
> >>
> >># rpm -qa | grep -i archiv
> >># rpm -ivh /usr/src/redhat/RPMS/i386/perl-Archive-Zip-1.09-1.i386.rpm
> >>Preparing...                ###########################################
> >>[100%]
> >>   1:perl-Archive-Zip       ###########################################
> >>[100%]
> >># rpm -qa | grep -i archiv
> >>perl-Archive-Zip-1.09-1
> >>
> >>
> >>
> >>./install.sh
> >>is running once again
> >>wait a few minute for the result :-)
> >>
> >>--
> >>shrek-m
> >
> >--
> >Julian Field
> >www.MailScanner.info
> >MailScanner thanks transtec Computers for their support
> >
> >PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654
>
>--
>Julian Field
>www.MailScanner.info
>MailScanner thanks transtec Computers for their support
>
>PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654

-- 
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support

PGP footprint: EE81 D763 3DB0 0BFD E1DC 7222 11F6 5947 1415 B654