Process did not exit cleanly, returned 0 with signal 11

[Mike Todd]

I'll give that a try and report back.

Also, slightly OT but:

%/usr/local/bin/sensors
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at e000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

eeprom-i2c-0-51
Adapter: SMBus I801 adapter at e000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       512

adm1025-i2c-0-2d
Adapter: SMBus I801 adapter at e000
+2.5V:     +1.47 V  (min =  +2.25 V, max =  +2.75 V)   ALARM
VCore:     +1.46 V  (min =  +1.28 V, max =  +1.41 V)   ALARM
+3.3V:     +3.28 V  (min =  +2.96 V, max =  +3.63 V)
+5V:       +5.13 V  (min =  +4.51 V, max =  +5.49 V)
+12V:      +0.00 V  (min = +10.81 V, max = +13.19 V)
VCC:       +3.27 V  (min =  +2.96 V, max =  +3.63 V)
CPU Temp:  +42.0 C  (low  =   +10 C, high =   +60 C)
M/B Temp:  +35.0 C  (low  =   +10 C, high =   +45 C)
vid:       +1.50 V

How do I make that +2.5V go in the range? and VCORE go in the range. I
would assume that could cause problems.

Mike

-------------------------- MailScanner list ----------------------
To leave, send    leave mailscanner    to jiscmail at jiscmail.ac.uk
Before posting, please see the Most Asked Questions at
http://www.mailscanner.biz/maq/     and the archives at
http://www.jiscmail.ac.uk/lists/mailscanner.html